Профессиональный динамик ВЧ BEYMA CP755/TI. Инструкция на английском языке

CP-755Ti
CP-755Ti
HIGH FREQUENCY
COMPRESSION DRIVER
TECHNICAL SPECIFICATIONS
Throat diameter                          36 mm. 1.4 in.
Rated impedance                               8 ohms
Minimum impedance                   7.3 ohms @ 3.5 kHz
D.C. Resistance                              5.5 ohms
Power capacity                   70 w  AES above 0.8 kHz
90 w  AES above 1.5 kHz
Program power                       140 w above 0.8 kHz
180 w above 1.5 kHz
Sensitivity                           110 dB 1 w @ 1m
coupled to TD-565 horn
Frequency range                            0.6 - 20 kHz
Recommended crossover    800 Hz or higher (12 dB/oct. min.)
Voice coil diameter                   72.2 mm. 2.87 in.
Magnetic assembly weight                6.5 kg. 14.33 lb.
Flux density                                   1.875 T
BL factor                                      10 N/A           DIMENSION DRAWINGS
MOUNTING INFORMATION
Overall diameter                      192 mm.   7.56 in.
Depth                                  78 mm.   3.07 in.
Mounting              Four M6 threaded holes, 90? apart on
101.6 mm (4 in.) diameter circle.
Mounting hardware is supplied.
Net weight                             6.75 kg. 14.85 lb.
Shipping weight                           7 kg. 15.4 lb.
MATERIALS
•   Diaphragm: titanium.
•   Voice coil: edgewound aluminium ribbon wire.
•   Voice coil former: kapton.                                Notes:
•   Magnet: ferrite.                                          *The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
**Sensitivity was measured at 1 m distance, on axis, with 1 w input, averaged in the range 1-7 kHz.
GENERAL DESCRIPTION
This high frequency compression driver features a composite structure diaphragm. It has a Mylar surround to provide damping and
avoid resonant peaks typical of metal surrounds. The dome is made of pure titanium, with its unique mechanical properties.
This diaphragm combined with a new optimized phasing-plug and a copper ring, results in an extremely smoothed and extended high
frequency response.
FREQUENCY RESPONSE AND DISTORTION CURVES                 FREQUENCY RESPONSE AND DISTORTION CURVES
Note: on axis frequency response measured coupled to TD-565  Note: on axis frequency response measured coupled to TD-595
horn in anechoic chamber, 1w @ 1m.                        horn in anechoic chamber, 1w @ 1m.
049
Poligono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: beyma@beyma.com ·