Профессиональный динамик ВЧ BEYMA CP750/Ti. Инструкция на английском языке

CP-750Ti
CP-750Ti
HIGH FREQUENCY
COMPRESSION DRIVER
TECHNICAL SPECIFICATIONS
Throat diameter                           49 mm. 2 in.
Rated impedance                               8 ohms
Minimum impedance                   7.4 ohms @ 3.5 kHz
D.C. Resistance                              5.5 ohms
Power capacity *                   90 w AES above 1 kHz
Program power                        180 w above 1 kHz
Sensitivity **                        110 dB 1 w @ 1m
coupled to TD-400N horn
Frequency range                            0.6 - 20 kHz
Recommended crossover    800 Hz or higher (12 dB/oct. min.)
Voice coil diameter                   72.2 mm. 2.87 in.
Magnetic assembly weight                6.5 kg. 14.33 lb.
Flux density                                   1.875 T
BL factor                                      10 N/A
DIMENSION DRAWINGS
MOUNTING INFORMATION
Overall diameter                      192 mm.   7.56 in.
Depth                                  88 mm.   3.46 in.
Mounting              Four M6 threaded holes, 90? apart on
101.6 mm (4 in.) diameter circle.
Mounting hardware is supplied.
Net weight                             7.05 kg. 15.51 lb.
Shipping weight                         7.3 kg. 16.06 lb.
MATERIALS
Diaphragm: titanium.
•
Voice coil: edgewound aluminium ribbon wire.
•
Voice coil former: kapton.
•                                                             Notes:
Magnet: ferrite.
•
*The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
GENERAL DESCRIPTION                                         **Sensitivity was measured at 1 m distance, on axis, with 1 w input, averaged in the range 1-7 kHz.
This high frequency compression driver features a composite structure diaphragm. It has a Mylar surround to provide damping and
avoid resonant peaks typical of metal surrounds. The dome is made of pure titanium, with its unique mechanical properties.
This diaphragm combined with a new optimized phasing-plug and a copper ring, results in an extremely smoothed and extended high
frequency response.
FREQUENCY RESPONSE AND DISTORTION CURVES                 FREQUENCY RESPONSE AND DISTORTION CURVES
Note: on axis frequency response measured coupled to TD-400N  Note: on axis frequency response measured coupled to TD-460N
horn in anechoic chamber, 1w @ 1m.                        horn in anechoic chamber, 1w @ 1m.
Poligono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: beyma@beyma.com ·