Профессиональный коаксиальный динамик BEYMA 6CX200FE. Инструкция на английском языке

6CX200Fe
COAXIAL TRANSDUCER
www.beyma.com
KEY FEATURES
?  High power handling: 200 / 25 W AES  (LF / HF)
?  High sensitivity: 94 / 102 dB (LF / HF)
?  Low resonant frequency: 65 Hz
?  Demodulating ring in LF unit
?  CONEX Spider
?  PM-4 diaphragm
?  Common ferrite magnet system for both units
?  Low weight and mounting depth
?  70? coverage horn for HF dispersion control
?  Designed for compact cabinets
TECHNICAL SPECIFICATIONS                                        DIMENSION DRAWINGS
Nominal diameter                    165 mm     6,5 in
Rated impedance (LF/HF)                      8 / 8 ?
Minimum impedance (LF/HF)                  5,3 / 6 ?
Power capacity* (LF/HF)               200 / 25 W AES
Program power (LF/HF)                    400 / 50 W
Sensitivity (LF/HF**)              94 dB   1W @ Z N
102 dB   1W @ Z N
Frequency range                       60 - 20.000 Hz
Recom. HF crossover                3,5 kHz or higher
(12 dB/oct min slope)
Voice coil diameter (LF/HF)       50,8 mm          2 in
44,4 mm     1,75 in
BL factor                                  9,15 N/A
Moving mass                                0,014 kg
Voice coil length                            13 mm
Air gap height                                7 mm
X damage  (peak to peak)                     32 mm
MOUNTING INFORMATION
THIELE-SMALL PARAMETERS***                              Overall diameter                  188 mm     7,40 in
Bolt circle diameter              172 mm     6,77 in
Resonant frequency, f s                      65 Hz           Baffle cutout diameter:
D.C. Voice coil resistance, R e               4,9 ?           - Front mount                    145 mm     5,72 in
Mechanical Quality Factor, Q ms                 5,1          Depth                             106 mm     4,17 in 3
Electrical Quality Factor, Q es                0,34          Volume displaced by driver          0,55 l     0,02 ft
Total Quality Factor, Q ts                     0,32          Net weight                         3,6 kg       7,9 lb
Equivalent Air Volume to C ms , V as          10,5 l         Shipping weight                    4,0 kg       8,8 lb
Mechanical Compliance, C ms              408 µm / N
Mechanical Resistance, R ms              1,13 kg / s
Efficiency, ? 0                               0,8 %           Notes:
Effective Surface Area, S d               0,0135 m 2          * The power capaticty is determined according to AES2-1984 (r2003) standard. Program
Maximum Displacement, X max  ****             5 mm            power is defined as the transducer’s ability to handle normal music program material.
Displacement Volume, V d                    64 cm 3           ** Sensitivity  was measured at 1m distance, on axis, with 1W input, averaged in the range
1 - 7 kHz.
Voice Coil Inductance, L e  @ 1 kHz         0,3 mH
*** T-S parameters are measured after an exercise period using a preconditioning power
test. The  measurements  are  carried  out  with  a  velocity-current  laser  transducer  and  will
reflect the long term parameters (once the loudspeaker has been working for a short period
of time).
**** The X max  is calculated as (L vc  - H ag )/2 + (H ag /3,5), where L vc  is the voice coil length
and H ag  is the air gap height.

6CX200Fe
COAXIAL TRANSDUCER
www.beyma.com
FREE AIR IMPEDANCE CURVE
[?]
[Hz]
FREQUENCY RESPONSE
[dB]
[Hz]
Note: On axis frequency response measured with loudspeaker
standing on infinite baffle in anechoic chamber, 1W @ 1m
FILTERED AND OFF-AXIS FREQUENCY RESPONSE
[dB]
[Hz]
Note: Filtered frequency response measured with loudspeaker standing on
infinite baffle in anechoic chamber, 1W @ 1m with FD-2CX/Fe
10/13
? Tel.: (34) 96 130 13 75 ? Fax: (34) 96 130 15 07 ? http://www.beyma.com ? E-mail: beyma@beyma.com ?