Профессиональный динамик СЧ/НЧ BEYMA 5P200Fe. Инструкция на английском языке

5P200/Fe
LOW & MID FREQUENCY TRANSDUCER
www.beyma.com                                                                          P200 Series
KEY FEATURES
?  300 W program power
?  Sensitivity: 92 dB (1 W / 1 m)
?  Extended controlled displacement: X max  ± 5,7 mm
?  Extended mechanical displacement capability:
X damage  ± 16 mm
?  Designed with MMSS technology for high control,
symmetry and linearity
?  Shorting cap for extended response and low harmonic
distortion
TM
?  Waterproof paper cone with Santoprene  surround
?  Ferrite magnet
TECHNICAL SPECIFICATIONS                                        DIMENSION DRAWINGS
Nominal diameter                      127 mm   5 in
Rated impedance                                8 ?
Minimum impedance                             6,7 ?
Power capacity*                           150 W AES
Program power                                300 W
Sensitivity                   92 dB   1W @ 1m @ Z
N
Frequency range                      70 - 10.000 Hz
Recom. enclosure vol.         4 / 10 l     0,14 / 0,35 ft 3
Voice coil diameter                 38 mm       1,5 in
Magnetic assembly weight            1,9 kg     4,19 lb
BL factor                                   8,5 N/A
Moving mass                                 0.01 kg
Voice coil length                           14 mm
Air gap height                                6 mm
X damage  (peak to peak)                    16 mm
THIELE-SMALL PARAMETERS**                                       MOUNTING INFORMATION
72 Hz         Overall diameter                 155 mm        6,1 in
Resonant frequency, f s
5,2 ?         Bolt circle diameter            141,5 mm      5,57 in
D.C. Voice coil resistance, R e
7,50         Baffle cutout diameter:
Mechanical Quality Factor, Q ms
0,35          - Front mount                   119 mm      4,69 in
Electrical Quality Factor, Q es
0,33          - Rear mount                    122 mm        4,8 in
Total Quality Factor, Q ts
5,69 l        Depth                            78,9 mm      3,11 in
Equivalent Air Volume to C ms , V as                                                                         3
451 µm / N         Volume displaced by driver          0,5 l      0,02 ft
Mechanical Compliance, C ms
0,65 kg / s       Net weight                        2,19 kg      4,83 lb
Mechanical Resistance, R ms
Efficiency, ? 0                              0,58 %         Shipping weight                   2,47 kg      5,45 lb
Effective Surface Area, S d               0,0095 m 2
Maximum Displacement, X max  ***            5,7 mm
49 cm 3
Displacement Volume, V d
Notes:
Voice Coil Inductance, L e  @ 1 kHz         0,6 mH
*  The  power  capaticty  is  determined  according  to AES2-1984  (r2003)  standard.  Program
power is defined as the transducer’s ability to handle normal music program material.
** T-S parameters are measured after an exercise period using a preconditioning power test.
The measurements are carried out with a velocity-current laser transducer and will reflect the
long term parameters (once the loudspeaker has been working for a short period of time).
*** The X max  is calculated as (L vc  - H ag )/2 + (H ag /3,5), where L vc  is the voice coil length and
H ag  is the air gap height.

5P200/Fe
LOW & MID FREQUENCY TRANSDUCER
www.beyma.com                                                                          P200 Series
LOW & MID FREQUENCY TRANSDUCER
FREE AIR IMPEDANCE CURVE
[?]
[Hz]
FREQUENCY RESPONSE AND DISTORTION
[dB]
[Hz]
Note: On axis frequency response measured with loudspeaker
standing on infinite baffle in anechoic chamber, 1W @ 1m
Poligono Industrial Moncada II ? C/. Pont Sec, 1c ? 46113 MONCADA - Valencia (Spain)
? Tel.: (34) 96 130 13 75 ? Fax: (34) 96 130 15 07 ? http://www.beyma.com ? E-mail: beyma@beyma.com ?
09/14