Профессиональный сабвуферный динамик BEYMA 15SW1300ND. Инструкция на английском языке

15SW1300Nd
LOW FREQUENCY TRANSDUCER
SW1600Nd series
KEY FEATURES
•  HELICEX® cooling technology
•  1300W AES power handling capacity
•  High sensitivity: 97dB@ 2.83v
•  Low resonant frequency: 44Hz
•  Extended controlled displacement: Xmax ± 10 mm
•  Massive mechanical displacement capability: Xpp 60mm
•  Exclusive NCR membrane (Neck Coupling Reinforcement)
•  Designed with MMSS technology
•  4” DUO double inner/outer voice coil winding
•  CONEX Spider with Die Cast  Aluminum Ring
TECHNICAL SPECIFICATIONS                                      DIMENSION DRAWINGS
Nominal diameter                     380mm.   15 in.
Rated impedance                              8 ohms
Minimum impedance                          5.8 ohms
Power capacity*                         1300 w AES
Program power                                2600 w
Sensitivity                 97 dB   2.83v @ 1m @ 2?
Frequency range                         25 - 1800 Hz
Maximum Recom. Frequency                     200 Hz
Recom. enclosure vol.          40 / 150 l   1.4 / 5.3 ft. 3
Voice coil diameter                   100 mm.  4 in.
Magnetic assembly weight              6 kg.   13.2 lb.
BL factor                                 25.1 N / A
Moving mass                               0.160  kg.
Voice coil length                             25mm
Air gap height                                14mm
X damage (peak to peak)                      60 mm
MOUNTING INFORMATION
THIELE-SMALL PARAMETERS**                                   Overall diameter                  388 mm.  15.28 in.
Bolt circle diameter              370 mm.  14.57 in.
Baffle cutout diameter:
Resonant frequency, fs                        44Hz
- Front mount                     350 mm. 13.78 in.
D.C. Voice coil resistance, Re             5.2 ohms
- Rear mount                      355 mm. 13.98 in.
Mechanical Quality Factor, Qms                 14.7
Depth                              155 mm.  6.10 in.
Electrical Quality Factor, Qes                 0.37
Volume displaced by driver              7 l  0.25 ft. 3
Total Quality Factor, Qts                      0.36
Net weight                         7.7 kg.  16.94 lb.
Equivalent Air Volume to Cms, Vas             89.6 l
Shipping weight                    8.7 kg.  19.14 lb.
Mechanical Compliance, Cms               81.5 µµ µµ µm / N
Mechanical Resistance, Rms                3.02 kg / s        Notes:
Efficiency, ?? ?? ?o (%)                       1.99
*The power capacity is determined according to AES2-1984 (r2003) standard.
2
Effective Surface Area, Sd (m )            0.088 m 2         Program power is defined as the transducer’s ability to handle normal music program material.
Maximum Displacement, Xmax***                10 mm           **T-S parameters are measured after an exercise period using a preconditioning power test.
Displacement Volume, Vd                      836cm 3         The measurements are carried out with a velocity-current laser transducer and will reflect the long
term parameters (once the loudspeaker has been working for a short period of time).
Voice Coil Inductance, Le @ 1 kHz           3.45 mH
***The Xmax is calculated as (Lvc - Hag)/2 + Hag/3.5, where Lvc is the voice coil length and Hag is
the air gap height.
069
056

15SW1300Nd
LOW FREQUENCY TRANSDUCER
SW1600Nd series
FREE AIR IMPEDANCE CURVE                                    POWER COMPRESSION LOSSES
4
3,5
3
2,5
dB  2
1,5
1
0,5
0  100  200  300  400  500  600  700  800  900  1000  1100  1200  1300
Power (W)
Note:   Power Compression Losses were calculated after 5 minutes period applying a pink noise
signal filtered between 25 and 200 Hz.
FREQUENCY RESPONSE AND DISTORTION
Note: on axis frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber, 1w @ 1m.
Poligono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: beyma@beyma.com ·    069
056