Стиральная машина BEKO EV 6800. Инструкция на русском языке

Washing Machine                                               EV6800
Перална машина
Skalbimo masina
Maquina de lavar
Стиральная машина
????????? ??????
1 - EN

1  Important safety instructions           on the detergent package.
This section contains safety instructions that will   •  The product must be unplugged during
help protect from risk of personal injury or property   installation, maintenance, cleaning and repairing
damage. Failure to follow these instructions shall   procedures.
void any warranty.                      •  Always have the installation and repairing
General safety                             procedures carried out by the Authorized
•  This product should not be used by persons   Service Agent. Manufacturer shall not be
with physical, sensory or mental disorders or   held liable for damages that may arise from
unlearned or inexperienced people (including   procedures carried out by unauthorized
children) unless they are attended by a person   persons.
who will be responsible for their safety or who   Intended use
will instruct them accordingly for use of the   •  This product has been designed for domestic
product.                                use. It is not suitable for commercial use and it
•  Never place the product on a carpet-covered   must not be used out of its intended use.
floor; Otherwise, lack of airflow beneath the   •  The product must only be used for washing
machine will cause electrical parts to overheat.   and rinsing of laundry that are marked
This will cause problems with your product.  accordingly.
•  Do not operate the product if the power cable   •  The manufacturer waives any responsibility
/ plug is damaged. Call the Authorized Service   arisen from incorrect usage or transportation.
Agent.                               Children's safety
•  Have a qualified electrician connect a   •  Electrical products are dangerous for the
16-Ampere fuse to the installation location of   children. Keep children away from the product
the product.                            when it is in use. Do not let them to tamper with
•  If the product has a failure, it should not be   the product.
operated unless it is repaired by the Authorized   •  Do not forget to close the loading door when
Service Agent. There is the risk of electric   leaving the room where the product is located.
shock!                               •  Store all detergents and additives in a safe
•  This product is designed to resume operating   place away from the reach of the children.
in the event of powering on after a power
interruption. If you wish to cancel the
programme, see "Cancelling the programme"   2  Installation
section.                             Refer to the nearest Authorised Service Agent for
•  Connect the product to a grounded outlet   installation of the product. To make the product
protected by a fuse complying with the values   ready for use, review the information in the user
in the "Technical specifications" table. Do not   manual and make sure that the electricity, tap water
neglect to have the grounding installation made   supply and water drainage systems are appropriate
by a qualified electrician. Our company shall   before calling the Authorized Service Agent. If they
not be liable for any damages that will arise   are not, call a qualified technician and plumber to
when the product is used without grounding in   have any necessary arrangements carried out.
accordance with the local regulations.  C   Preparation of the location and electrical, tap
•  The water supply and draining hoses must be   water and waste water installations at the place
securely fastened and remain undamaged.   of installation is under customer's responsibility.
Otherwise, there is the risk of water leakage.  B  Installation and electrical connections of the
•  Never open the loading door or remove the filter   product must be carried out by the Authorized
while there is still water in the drum. Otherwise,   Service Agent. Manufacturer shall not be
risk of flooding and injury from hot water will   held liable for damages that may arise from
occur.                                  procedures carried out by unauthorized
•  Do not force open the locked loading door.   persons.
The loading door will be ready to open just a   A  Prior to installation, visually check if the product
few minutes after the washing cycle comes to   has any defects on it. If so, do not have it
an end. In case of forcing the loading door to   installed. Damaged products cause risks for
open, the door and the lock mechanism may   your safety.
get damaged.                         C   Make sure that the water inlet and discharge
•  Unplug the product when not in use.     hoses as well as the power cable are not
•  Never wash the product by spreading or   folded, pinched or crushed while pushing
pouring water onto it! There is the risk of electric   the product into its place after installation or
shock!                                  cleaning procedures.
•  Never touch the plug with wet hands! Never   Appropriate installation location
unplug by pulling on the cable, always pull out   •  Place the machine on a rigid floor. Do not place
by grabbing the plug.                   it on a long pile rug or similar surfaces.
•  Use detergents, softeners and supplements   •  Total weight of the washing machine and the
suitable for automatic washing machines only.  dryer -with full load- when they are placed
•  Follow the instructions on the textile tags and   on top of each other reaches to approx. 180
2 - EN

kilograms. Place the product on a solid and flat    Do not use old or used water inlet hoses on
floor that has sufficient load carrying capacity!  A  the new product. It may cause stains on your
•  Do not place the product on the power cable.  laundry.
•  Do not install the product at places where   1.  Connect the special hoses supplied with the
temperature may fall below 0?C.         product to the water inlets on the product. Red
•  Place the product at least 1 cm away from the   hose (left) (max. 90 ?C) is for hot water inlet,
edges of other furniture.               blue hose (right) (max. 25 ?C) is for cold water
Removing packaging reinforcement
Tilt the machine backwards to remove the   inlet.
packaging reinforcement. Remove the packaging   A  Ensure that the cold and hot water connections
reinforcement by pulling the ribbon.       are made correctly when installing the product.
Otherwise, your laundry will come out hot at the
end of the washing process and wear out.
Tighten all hose nuts by hand. Never use a wrench
when tightening the nuts. Open the taps completely
after making the hose connection to check
for water leaks at the connection points. If any
leaks occur, turn off the tap and remove the nut.
Retighten the nut carefully after checking the seal.
Removing the transportation locks       To prevent water leakages and damages caused
A   Do not remove the transportation locks before   by them, keep the taps closed when the machine
taking out the packaging reinforcement.  is not in use.
A   Remove the transportation safety bolts before
operating the washing machine! Otherwise, the   Connecting to the drain
product will be damaged.             •  The end of the drain hose must be directly
Loosen all the bolts with a suitable spanner until   connected to the wastewater drain or to the
they rotate freely (C). Remove transportation safety   washbasin.
bolts by turning them gently. Attach the plastic    Your house will be flooded if the hose comes
covers supplied in the User Manual bag into the   A  out of its housing during water discharge.
holes on the rear panel. (P)               Moreover, there is risk of scalding due to
high washing temperatures! To prevent such
situations and to ensure smooth water intake
and discharge of the machine, fix the end of the
discharge hose tightly so that it cannot come
C   Keep the transportation safety bolts in a safe   out.
place to reuse when the washing machine   •  The hose should be attached to a height of at
needs to be moved again in the future.  least 40 cm, and 100 cm at most.
C   Never move the product without the   •  In case the hose is elevated after laying it on
transportation safety bolts properly fixed in   the floor level or close to the ground (less than
place!                                  40 cm above the ground), water discharge
Connecting water supply                    becomes more difficult and the laundry may
C   The water supply pressure required to run   come out excessively wet. Therefore, follow the
the product is between 1 to 10 bars (0.1 – 10   heights described in the figure.
MPa). It is necessary to have 10 – 80 liters of
water flowing from the fully open tap in one
minute to have your machine run smoothly.
Attach a pressure reducing valve if water
pressure is higher.
C   If you are going to use the double water-inlet
product as a single (cold) water-inlet unit, you
must install the supplied stopper to the hot
water valve before operating the product.   •  To prevent flowing of dirty water back into the
(Applies for the products supplied with a blind   machine and to allow for easy discharge, do
stopper group.)                         not immerse the hose end into the dirty water
C   If you want to use both water inlets of the   or do not drive it in the drain more than 15 cm.
product, connect the hot water hose after   If it is too long, cut it short.
removing the stopper and gasket group from   •  The end of the hose should not be bent, it
the hot water valve. (Applies for the products   should not be stepped on and the hose must
supplied with a blind stopper group.)   not be pinched between the drain and the
machine.
A   Models with a single water inlet should not be   •  If the length of the hose is too short, use it
connected to the hot water tap. In such a case
the laundry will get damaged or the product will   by adding an original extension hose. Length
switch to protection mode and will not operate.  of the hose may not be longer than 3.2 m.
3 - EN