Швейная машина JANOME Cover Pro 2. Инструкция на русском языке

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including the
followings:
Read all instructions before using this appliance.
DANGER— To reduce the risk of electric shock:
1.   An appliance should never be left unattended when plugged in. Always unplug this sewing machine
from the electric outlet immediately after using and before cleaning.
2.   Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated
15 Watts.
WARNING— To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by
or near children.
2. Use this appliance only for its intended use as described in this owner’s manual.
Use only attachments recommended by the manufacturer as contained in this owner’s manual.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or dropped into water.
Return this sewing machine to the nearest authorized dealer or service center for examination,
repair, electrical or mechanical adjustment.
4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing
machine and foot controller free from accumulation of lint, dust and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8. To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the sewing machine
needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch this sewing machine off (“O”) when making any adjustment in the needle area, such as
threading the needle, changing the needle, threading the bobbin or changing the presser foot, and
the like.
15. Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or
when making any other adjustments mentioned in this owner’s manual.
SAVE THESE INSTRUCTIONS
The design and specifications are subject to change without a prior notice.

796-800-006 (E)
Printed in Taiwan

TABLE OF CONTENTS
KNOW YOUR MACHINE
Names of Parts .................................................................................................. 2
Standard Accessories ........................................................................................ 3
GETTING READY TO SEW
Connecting the Machine to the Power Supply ................................................... 4
Controlling Sewing Speed .................................................................................. 4
How to Turn the Handwheel............................................................................... 5
Opening and Closing the Looper Cover ............................................................. 5
Extension Table ................................................................................................. 5
Raising or Lowering the Presser Foot ................................................................ 6
Removing the Presser Foot ............................................................................... 6
Attaching the Presser Foot................................................................................. 6
Adjustment of Foot Pressure.............................................................................. 6
Adjustment of Stitch Length ............................................................................... 7
Adjustment of Differential Feed Ratio ................................................................ 7
Changing Needle ............................................................................................... 8
How to use the needle threader/holder .................................................................... 8
Setting the Thread Guide Bar ............................................................................ 9
Setting the Spool Cones .................................................................................... 9
Threading the Machine .................................................................................... 10
Threading the needles ............................................................................................ 11
How to use the threader ......................................................................................... 12
Threading the looper .............................................................................................. 13
STITCH TYPES
Triple Cover Stitch............................................................................................ 15
Balancing the thread tension .................................................................................. 15
Cover Stitch...................................................................................................... 16
Balancing the thread tension .................................................................................. 17
Chain Stitch ...................................................................................................... 18
Balancing the thread tension .................................................................................. 18
Finishing the Seam .......................................................................................... 19
Beginning of the seam ............................................................................................ 19
End of the seam ..................................................................................................... 19
Knotting the threads ............................................................................................... 19
Removing the Fabric in the Middle of the Stitching .......................................... 20
Hemming with the Cover Stitch ........................................................................ 21
Free Arm Hemming .......................................................................................... 21
Triple Cover Stitch Applications........................................................................ 22
CARE OF YOUR MACHINE
Cleaning the Feed Dogs and Looper Area ....................................................... 23
Replacing the Light Bulb .................................................................................. 23
Troubleshooting................................................................................................ 24
1