Встраиваемый электрический духовой шкаф HOTPOINT-ARISTON OL 1038 LI RFH (DS). Инструкция на русском языке

Operating Instructions
OVEN
Contents
GB
Installation, 2-3
GB            RS                                 Positioning
Electrical connection
English,1     Русский, 16                         Data plate
Description of the appliance, 4
Overall view
Control panel
Start-up and use, 5-6
Control panel lock
Setting the clock
Setting the minute minder
Starting the oven
Concealed handle
Restoring the factory settings
Standby
MOL 1038EL X RU/HA
Modes, 7-11
Manual cooking modes
Automatic cooking modes
Programming cooking
Practical cooking advice
Cooking advice table
Precautions and tips, 11
General safety
Disposal
Respecting and conserving the environment
Care and maintenance, 12-13
Switching the appliance off
Cleaning the appliance
Cleaning the oven door
Replacing the light bulb
Assembling the sliding rack kit
Troubleshooting, 14
Assistance, 15
1

Installation
! Please keep this instruction booklet in a safe place  Ventilation
GB      for future reference. If the appliance is sold, given
away or moved, please make sure the booklet is also  To ensure adequate ventilation is provided, the back
passed on to the new owners so that they may        panel of the cabinet must be removed. It is
benefit from the advice contained within it.        advisable to install the oven so that it rests on two
strips of wood, or on a completely flat surface with an
! Please read this instruction manual carefully: it  opening of at least 45 x 560 mm (see diagrams).
contains important information concerning the safe
operation, installation and maintenance of the
appliance.
560 mm.  45 mm.
Positioning
! Do not let children play with the packaging material;
it should be disposed of in accordance with local
separated waste collection standards (see
Precautions and tips).
! The appliance must be installed by a qualified    Centring and fixing
professional in accordance with the instructions
provided. Incorrect installation may damage property  Secure the appliance to the cabinet:
or cause harm to people or animals.                 • Open the oven door.
• Remove the 2 rubber plugs covering the fixing
Built-in appliances                                    holes on the perimeter frame.
• Fix the oven to the cabinet using the 2 wood
Use an appropriate cabinet to ensure that the          screws.
appliance operates properly:                        • Replace the rubber plugs.
• The panels adjacent to the oven must be made of
heat-resistant material.
• Cabinets with a veneer exterior must be
assembled with glues which can withstand
temperatures of up to 100°C.
• To install the oven under the counter (see
diagram) or in a kitchen unit, the cabinet must
have the following dimensions:
550 mm.                       ! All parts which ensure the safe operation of the
min.
20 mm.   45 mm.   575-585 mm.          appliance must not be removable without the aid of a
tool.
590 mm.         570 mm.  560 mm.
550 mm.
595 mm.
20,5 mm.
22,5 mm.*
* Stainless steel models only
! The appliance must not come into contact with
electrical parts once it has been installed.
The indications for consumption given on the data
plate have been calculated for this type of
installation.
2

Electrical connection                               Before connecting the appliance to the power
supply, make sure that:                             GB
! Ovens equipped with a three-pole power supply
cable are designed to operate with alternating      • the appliance is earthed and the plug is compliant
current at the voltage and frequency indicated on     with the law;
the data plate located on the appliance (see below).  • the socket can withstand the maximum power of
the appliance, which is indicated on the data plate
Fitting the power supply cable                        (see below);
• the voltage is in the range between the values
1. Open the terminal         indicated on the data plate (see below);
board by inserting a       • the socket is compatible with the plug of the
screwdriver into the         appliance. If the socket is incompatible with the
side tabs of the cover.      plug, ask an authorised technician to replace it. Do
Use the screwdriver as       not use extension cords or multiple sockets.
a lever by pushing it      ! Once the appliance has been installed, the power
down to open the cover     supply cable and the electrical socket must be easily
(see diagram).             accessible.
! The cable must not be bent or compressed.
2. Loosen the cable
! The cable must be checked regularly and replaced
clamp screw and
by authorised technicians only (see Assistance).
remove it, using a
! The manufacturer declines any liability should
screwdriver as a lever
these safety measures not be observed.
(see figure).
3. Remove the wire
contact screws L-N-
, then fasten the wires
under the screw heads,
APPLIANCE SPECIFICATIONS
respecting the colour
code: Blue (N), Brown                        width 43.5 cm
Dimensions       height 32 cm
(L) and Yellow-Green
depth 41.5 cm
Verde (  ).
Volume           58 l
Connecting the electricity supply cable to the                        voltage: 220 - 240 V~ 50/60 Hz
mains                                                Electrical       (see data plate)
connections      maximum power absorbed
Install a standardised plug corresponding to the                      2800 W
load indicated on the data plate (see table).                         Directive 2002/40/EC on the label
The appliance must be directly connected to the                       of electric ovens. Standard EN 50304
mains using an omnipolar switch with a minimum
contact opening of 3 mm installed between the        ENERGY           Declared energy consumption
LABEL*           for Forced convection Class –
appliance and the mains.  The switch must be
heating mode:
suitable for the charge indicated and must comply
ECO.
with current electrical regulations (the earthing wire
must not be interrupted by the switch). The supply
cable must be positioned so that it does not come
into contact with temperatures higher than 50°C at
any point (the back panel of the oven, for example).
! The installer must ensure that the correct electrical
connection has been performed and that it is fully
compliant with safety regulations.
* Without removable guide rails
3