Плита HOTPOINT-ARISTON CG 65SG1 X. Инструкция на русском языке

Operating Instructions
COOKER
GB
Contents
GB            RS           UA
Installation, 2-6
English,1     РУССКИЙ, 13  Украінська, 26        Positioning and levelling
Electrical connection
Gas connection
RO                                              Adapting to different types of gas
Technical data
Romanian, 37                                     Table of burner and nozzle specifications
Description of the appliance, 7
Overall view
Control panel
Start-up and use, 8-10
Using the hob
Using the oven
CG65SG5 UA/HA                                    Oven cooking advice table
CG65SG1 UA/HA
Electronic timer, 9
Setting the clock and timer
Precautions and tips, 11
General safety
Disposal
Respecting and conserving the environment
Care and maintenance, 12
Switching the appliance off
Cleaning the appliance
Replacing the oven light bulb
Gas tap maintenance
Assistance

Installation
! Before operating your new appliance please read   Disposing of combustion fumes
GB     this instruction booklet carefully. It contains important
information concerning the safe installation and    The disposal of combustion fumes should be
operation of the appliance.                         guaranteed using a hood connected to a safe and
efficient natural suction chimney, or using an electric
! Please keep these operating instructions for future  fan that begins to operate automatically every time the
reference. Make sure that the instructions are kept with  appliance is switched on (see figure).
the appliance if it is sold, given away or moved.
! The appliance must be installed by a qualified
professional according to the instructions provided.
! Any necessary adjustment or maintenance must be
performed after the cooker has been disconnected
from the electricity supply.
Room ventilation                                    Fumes channelled        Fumes channelled through
straight outside        a chimney or a branched
The appliance may only be installed in permanently-                         flue system (reserved for
ventilated rooms, according to current national                             cooking appliances)
legislation. The room in which the appliance is     ! The liquefied petroleum gases are heavier than air
installed must be ventilated adequately so as to    and collect by the floor, therefore all rooms containing
provide as much air as is needed by the normal gas  LPG cylinders must have openings leading outside so
combustion process (the flow of air must not be lower
than 2 m /h per kW of installed power).             that any leaked gas can escape easily.
3
The air inlets, protected by grilles, should have a duct  LPG cylinders, therefore, whether partially or
with an inner cross section of at least 100 cm  and  completely full, must not be installed or stored in
2
should be positioned so that they are not liable to  rooms or storage areas that are below ground level
even partial obstruction (see figure A).            (cellars, etc.). Only the cylinder being used should be
These inlets should be enlarged by 100% - with a    stored in the room; this should also be kept well away
from sources of heat (ovens, chimneys, stoves) that
minimum of 200 cm  - whenever the surface of the hob  may cause the temperature of the cylinder to rise
2
is not equipped with a flame failure safety device.
When the flow of air is provided in an indirect manner  above 50°C.
from adjacent rooms (see figure B), provided that
these are not communal parts of a building, areas with  Positioning and levelling
increased fire hazards or bedrooms, the inlets should  ! It is possible to install the appliance alongside
be fitted with a ventilation duct leading outside as  cupboards whose height does not exceed that of the
described above.                                    hob surface.
Adjacent room  Room requiring  ! Make sure that the wall in contact with the back of
ventilation
A                        B                          the appliance is made from a non-flammable, heat-
resistant material (T 90°C).
To install the appliance correctly:
• Place it in the kitchen, dining room or the bed-sit
(not in the bathroom).
• If the top of the hob is higher than the cupboards,
A
the appliance must be installed at least 600 mm
Ventilation opening        Increase in the gap         away from them.
for comburent air          between the door and     • If the cooker is installed underneath a wall cabinet,
the flooring                there must be a minimum distance of 420 mm
between this cabinet and the top of the hob.
! After prolonged use of the appliance, it is advisable  This distance should be increased to 700 mm if the
to open a window or increase the speed of any fans  wall cabinets are flammable (see figure).
used.
2

• The voltage is in the range between the values
indicated on the data plate.                      GB
HOOD
• The socket is compatible with the plug of the
Min.  600mm.                                  appliance. If the socket is incompatible with the
420mm.           420mm.  min. 650 mm. with hood min. 700 mm. without hood  plug, ask an authorised technician to replace it. Do
not use extension cords or multiple sockets.
Min.             Min.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be easily
accessible.
• Do not position blinds behind the cooker or less  ! The cable must not be bent or compressed.
than 200 mm away from its sides.
• Any hoods must be installed according to the      ! The cable must be checked regularly and replaced
instructions listed in the relevant operating manual.  by authorised technicians only.
Levelling                                           ! The manufacturer declines any liability should
these safety measures not be observed.
If it is necessary to level the
appliance, screw the adjustable  Gas connection
feet into the places provided on  Connection to the gas network or to the gas cylinder
each corner of the base of the  may be carried out using a flexible rubber or steel hose,
cooker (see figure).            in accordance with current national legislation and after
making sure that the appliance is suited to the type of
gas with which it will be supplied (see the rating sticker
The legs* fit into the slots on  on the cover:  if this is not the case see below). When
the underside of the base of    using liquid gas from a cylinder, install a pressure
the cooker.                     regulator which complies with current national
regulations. To make connection easier, the gas supply
may be turned sideways*: reverse the position of the
hose holder with that of the cap and replace the gasket
that is supplied with the appliance.
Electrical connection                               ! Check that the pressure of the gas supply is
consistent with the values indicated in the Table of
Install a standardised plug corresponding to the load  burner and nozzle specifications (see below). This will
indicated on the appliance data plate (see Technical  ensure the safe operation and durability of your
data table).                                        appliance while maintaining efficient energy
The appliance must be directly connected to the mains  consumption.
using an omnipolar circuit-breaker with a minimum
contact opening of 3 mm installed between the appliance  Gas connection using a flexible rubber hose
and the mains. The circuit-breaker must be suitable for
the charge indicated and must comply with current   Make sure that the hose complies with current national
national legislation (the earthing wire must not be  legislation. The internal diameter of the hose must
interrupted by the circuit-breaker). The supply cable must  measure: 8 mm for liquid gas supply; 13 mm for
be positioned so that it does not come into contact with  methane gas supply.
temperatures higher than 50°C at any point.
Once the connection has been performed, make sure
that the hose:
Before connecting the appliance to the power supply,
make sure that:                                     • Does not come into contact with any parts that
• The appliance is earthed and the plug is compliant with  reach temperatures of over 50°C.
the law.                                          • Is not subject to any pulling or twisting forces and
• The socket can withstand the maximum power of the   that it is not kinked or bent.
appliance, which is indicated by the data plate.  • Does not come into contact with blades, sharp
corners or moving parts and that it is not
* Only available in certain models                    compressed.
3