Встраиваемая газовая варочная панель HOTPOINT-ARISTON 7HPK 644 D GH X /HA. Инструкция на русском языке

Operating Instructions
HOB
Contents
GB
Installation, 2-4
GB             RS                KZ                Positioning
Electrical connection
English, 1       Русский, 10                         Gas connection
Burner and nozzle specifications
Description of the appliance, 5
Overall view
Start-up and use, 6
Practical advice on using the burners
Data plate
Precautions and tips, 7
General safety
Disposal
7HPK 644 D GH X /HA                                 Maintenance and care, 8
7HPKQ 644 D GH /HA                                  Switching the appliance off
7HPK 755 D GH X/HA                                  Cleaning the appliance
7HPKQ 755 D GH /HA                                  Gas tap maintenance
Troubleshooting, 9
1

Installation
! Before operating your new appliance please read this  Fitting the appliance
GB      instruction booklet carefully. It contains important information  Gas and mixed hobs are manufactured with type X
for safe use, installation and care of the appliance.  degree protection against overheating. The following
! Please keep these operating instructions for future  precautions must be taken when installing the hob:
reference. Pass them on to possible new owners of the  • Kitchen cabinets adjacent to the appliance and taller
appliance.                                             than the top of the hob must be at least 600 mm from
Positioning                                            the edge of the hob.
! Keep packaging material out of the reach of children. It  • Hoods must be installed according to their relative
can become a choking or suffocation hazard (see        installation instruction manuals and at a minimum
Precautions and tips).                                 distance of 650 mm from the hob.
! The appliance must be installed by a qualified professional  • Place the wall cabinets adjacent to the hood at a
according to the instructions provided. Incorrect installation  minimum height of 420 mm from the hob (see figure).
may cause harm to people and animals or may damage
property.                                                               If the hob is installed beneath a
wall cabinet, the latter must be
! This unit may be installed and used only in permanently
situated at a minimum of 700 mm
ventilated rooms in accordance with British Standard Codes  600mm min.
Of Practice: B.S. 6172 / B.S. 5440, Par. 2 and B.S. 6891  700mm min.  600mm min.  above the hob (see figure).
Current Editions. The following requirements must be
observed:
• The room must be equipped with an air extraction system
that expels any combustion fumes. This may consist of a
• The installation cavity should have the dimensions
hood or an electric fan that automatically starts each time
indicated in the figure. Fastening hooks are provided,
the appliance is switched on.
allowing you to fasten the hob to tops that are between
20 and 40 mm thick. To ensure the hob is securely
fastened to the top, we recommend you use all the
hooks provided.
55 mm
In a chimney stack or branched flue.   Directly to
(exclusively for cooking appliances)  the Outside                                    475 mm
• The room must also allow proper air circulation, as air is
needed for combustion to occur normally. The flow of air
3
must not be less than 2 m /h per kW of installed power.                   555 mm
The air circulation system may  • Before fastening the cooktop in place, position the seal
take air directly from the outside  (supplied) along the perimeter of the countertop, as
by means of a pipe with an inner   shown in the figure.
cross section of  at least 100 cm ;
2
A
the opening must not be
Examples of ventilation holes  vulnerable to any type of
for comburant air.
blockages.
Adjacent  Room to be  The system can also provide the
Room   Vented
air needed for combustion
indirectly, i.e. from adjacent rooms  Hook fastening diagram
fitted with air circulation tubes as
described above. However, these
rooms must not be communal
Enlarging the ventilation slot  rooms, bedrooms or rooms that
between window and floor.
may present a fire hazard.
Hooking position         Hooking position
for top H=20 mm          for top H=30 mm
2

Front                       and must comply with current electrical regulations (the
earthing wire must not be interrupted by the circuit-breaker).  GB
The supply cable must not come into contact with surfaces
with temperatures higher than 50°C.
! The installer must ensure that the correct electrical
connection has been made and that it is compliant with
safety regulations.
Before connecting to the power supply, make sure that:
• The appliance is earthed and the plug is compliant with
the law.
• The socket can withstand the maximum power of the
Hooking position         Back
appliance, which is indicated on the data plate.
for top H=40 mm
• The voltage is in the range between the values indicated
! Use the hooks contained in the “accessory pack”
on the data plate.
• Where the hob is not installed over a built-in oven, a
• The socket is compatible with the plug of the appliance. If
wooden panel must be installed as insulation. This
the socket is incompatible with the plug, ask an
must be placed at a minimum distance of 20 mm from
authorised technician to replace it. Do not use extension
the lower part of the hob.
cords or multiple sockets.
Ventilation                                         ! Once the appliance has been installed, the power supply
To ensure adequate ventilation, the back panel of the  cable and the electrical socket must be easily accessible.
cabinet must be removed. It is advisable to install the
! The cable must not be bent or compressed.
oven so that it rests on two strips of wood, or on a
! The cable must be checked regularly and replaced by
completely flat surface with an opening of at least 45 x
authorised technicians only (see Assistance).
560 mm (see diagrams).
! The manufacturer declines any liability should these safety
measures not be observed.
560 mm.  45 mm.               Gas connection
The appliance should be connected to the main gas
supply  in compliance with current national regulations.
Before carrying out the connection, make sure the cooker
is compatible with the gas supply you wish to use.
! The hob can only be installed above built-in ovens with a  ! Check that the pressure of the gas supply is consistent
cooling ventilation system.                         with the values indicated in Table 1 (“Burner and nozzle
specifications”). This will ensure the safe operation and
longevity of your appliance while maintaining efficient
Electrical connection                               energy consumption.
Hobs equipped with a three-pole power supply cable are
Connection with a rigid pipe (copper or steel)
designed to operate with alternating current at the voltage
and frequency indicated on the data plate (this is located  ! Connection to the gas system must be carried out in
on the lower part of the appliance). The earth wire in the  such a way as not to place any strain of any kind on the
cable has a green and yellow cover. If the appliance is to  appliance.
be installed above a built-in electric oven, the electrical  There is an adjustable L-shaped pipe fitting on the
connection of the hob and the oven must be carried out  appliance supply ramp and this is fitted with a seal in
separately, both for electrical safety purposes and to  order to prevent leaks. The seal must always be replaced
make extracting the oven easier.                    after rotating the pipe fitting (seal provided with
appliance). The gas supply pipe fitting is a threaded 1/2
Connecting the supply cable to the mains
gas cylindrical male attachment.
Install a standardised plug corresponding to the load
indicated on the data plate.
The appliance must be directly connected to the mains using
an omnipolar circuit-breaker with a minimum contact opening
of 3 mm installed between the appliance and the mains.  The
circuit-breaker must be suitable for the charge indicated
3