Вентилятор VITEK VT-1908. Инструкция на русском языке

VT-1908.qxd  02.12.02  16:35  Page 2
16” STAND  FAN
16” ВЕНТИЛЯТОР
MANUAL INSTRUCTION
МОДЕЛЬ VT&1908
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

8.
6.
7.
5.
Grill Nut
Rear Grill
Cross bar
Base Cap
Base Tube
Motor Housing
Telescopic Tube
DESCRIPTION OF PARTS
Height adjustment Collar
2
9.
15.Rim
Blade
13.Grill Clip
12.Front Grill
16. Set Screw
10.Motor Shaft
11.Blade Spinner
14.Oscillation Control Bar
Г
Купон №1      4.  Модель:  3.  2.  1. Купон №2  Модель:  Купон №3  Модель:  продающей организации  Гарантийный талон действителен только при наличии печати  Внимание!  М.П.  Подпись покупателя  Подтверждаю получение исправного изделия, с условиями гарантии ознакомлен  Телефон:  Название и адрес продающей организации  Сведения о продавце  Дата покупки:  Серийный №:  Модель:  Сведения о покупке  ENGLISH  VT-1908.qxd  02.12.02  16:35  Page 4
Вид ремонта:
Вид ремонта:
Вид ремонта:
FN 190800000
арантийный талон
Дата выполнения ремонта:
Дата выполнения ремонта:
Дата выполнения ремонта:
Дата поступления в ремонт:
Дата поступления в ремонт:
Дата поступления в ремонт:
Серийный №:
Серийный №:
Серийный №:
FN 190800000
FN 190800000
FN 190800000
М.П.
М.П.
М.П.

VT-1908.qxd  02.12.02  16:35  Page 6
10
4.
5.
3.
1.
2.
6.
ance.
supervision.
supervision.
WARNINGS
placing one over the other.
ASSEMBLY INSTRUCTIONS
packed in original color box. Thank you!
7.   Beware tot the cable is not damaged.
Install the grill nut (7) and hand tighten.
3
sponds to the voltage indicated on the appliance.
11. Do not use the appliance for different purposes.
3.   Do not touch the appliance with wet or dumphands.
Save these instructions. Read rules for safe operation carefully.
the mains power supply, by removing the plug or switching it off.
4 screws. Make sure that the holes line up and tighten the 4 screws.
Adjust telescopic tube (4) to desired height lock in place by tighten knob.
4.   Do not use extensions on bathroom or shower, unless with particular care.
case of damage, or for the replacement apply only to a specialized technician.
1.   Before connecting the appliance, check that the power supply at home correZ
Important note: Please save color box. Returned goods will not be accepted if not
9. Do not pull the supply cable or the appliance to remove the plug from the socket.
Then securely close the clips so that they hold the grill firmly and evently together.
6.   Before carrying out any cleaning operation always disconnect the appliance form
ENGLISH
12. The appliance is not intended for use by young children or infirm persons without
8.   Do not pull the supply cable or the appliance to remove the plug from the socket.
13. Young children should be supervised to ensure that they do not play with the appliZ
10. The users should not replace the supply cable and/or the plug or this appliance. In
(9) onto the shaft. The blade spinner (11) is tightened by turning counterZclockwise.
5.   Do not leave the appliance within reach of children or irresponsible persons without
2.   Do not immerse the appliance in any liquid and do not use it near showers or baths.
on the shaft as possible.Tighten the blade spinner (11) into place to secure the blade
clip at the 12 O`Clock position and make sure that the two halves of the grill are even.
Mount the front grill (12) onto the rear grill (6) with all clips open. Line up the top fixed
Insert the fan blade onto the motor shaft (10) and make sure that the fits as far back
Place the flange at the bottom of the base tube (3) on the cros bar (1) and insert the
Loosen and remove the 4 screws from the cross bar (1). Assemble the cross bars by
holes in the grill fit snugly over the prongs protruding from the motor housing (8).
Remove the rear grill (6), grill nut (7) and mount the rear grill. Make certain that the