Устройство дистанционного управления TIMBERK TCH A1N/A1B/A2/A3. Инструкция на русском языке

Instruction manual
Remote control block
AA71
Outlook of devices, aslo colour scores can be revised without any special advance notices.

Dear Customer!
Thank you for your good choice and purchase of a remote control unit for a Timberk infrared
heater. It will serve you long
TMS 08.CH model remote control unit is designed to control TCH A1N, TCH A2 infrared
heater.
1. IMPORTANT INFORMATION
Please, read this operation manual carefully prior to using and connecting the remote con-
trol unit to an infrared heater.
This operation manual contains important information regarding your safety, as well as rec-
ommendations on the proper operation of the unit and its maintenance.
Keep this operation manual for further use. The purchased remote control can slightly di er
from the one, described in the manual, but that doesn't a ect methods of its use and opera-
tion.
Important precautions and instructions, contained in this manual, do not account for all pos-
sible modes and situations to be encountered. It is vital to understand that common sense,
caution and thoroughness are the factors that are impossible to be built-in in any product.
These factors must be taken into consideration by a person, interested in proper operation
of the unit. The manufacturer does not bear any responsibility in case when the unit or its
parts are damaged during transportation, as a result of improper installation, voltage  uctua-
tions, as well as if some part of the unit was altered or modi ed.
2  www.timberk.com   remote control block

2. PRECAUTIONS
A number of precautions is to be observed upon operation of an infrared heater and a remote control
unit. Improper operation as a result of ignoring precautions may harm health of the user and other
people, as well as damage their property.Detailed description of precautions is given in the infrared
heater's operation manual.
3. PURPOSE
The remote control unit allows to switch an infrared heater on/o , select power (except TCH A2) and set a
switch o  timer for a heater from a remote control.
4. TECHNICAL CHARACTERISTICS
Technical characteristics of the remote control unit are given in Table 1 below.
Table 1
Product identification number
Description           Units           TMS 08.CH
Voltage                      V               220/380
Frequency                    Hz               50
Power consumption            W                0,6
Maximum load power           W               3000
Remote control operating range  m              5
Electrical protection class  -                 II
Moisture protection class    -                IP20
Overall dimensions          mm              38 135 90
Weight                       kg               0,26
The manufacturer reserves the right to change the set-list of the device (including liquid and powder components) for different supplies
without prior notice. The changes either in no way influence the basic technical parameters of the device or may improve them, and also
not violate the legislation or quality standards of the countries of manufacture, transit and selling.
The changes in the set-list may result in changing of the weight and dimensions of the device, but not more than by +\- 5-20% (depending
on the product category)
www.timberk.com   remote control block  3