Внешний блок TIMBERK Jedi UL 25 (W). Инструкция на русском языке

Instruction manual
Руководство по эксплуатации
Электрический              Electric
тепловентилятор            fan heater
Модель/Model:            TFH T20FSN.LZ
Outlook of devices, aslo colour scores can be revised without any special advance
notices.
Производитель вправе менять внешний вид прибора и цветовую гамму при-
бора без специального уведомления.

Dear customer!
IMPORTANT!
Thank you for good choice and purchase of Timberk electric fan
heater. It will serve you for a long time.                  Important precautions  and  instructions, contained  in
this manual, do not account for all possible modes and
Timberk electric fan heater is designed to heat and create a   situations  to  be  encountered.  It  is  vital  to  understand
comfortable environment indoors during cold season. The fan   that common sense, caution and thoroughness are the
heater can be installed only in a vertically on a rigid foundation,   factors that are impossible to be built-in in any product.
where there is possible to connect to ~220V, 50Hz single-phase
power supply wiring.                                        These factors must be taken into consideration by man
who is interested in the proper operation of the unit.
The heater based on a standard metal ceramic heating        The manufacturer does not bear any responsibility in
element is convenient and easy-to-install, economical in use   case when the unit or its parts are damaged during
in connection with minimum energy losses, increased heat    transportation,  as  a  result  of  improper  installation,
exchange and effective distribution of the air flow.        voltage fluctuations, as well as if some part of the unit
was altered or modified.
Please, read this operation manual carefully prior to assembly
and use of the product.
2. PRECAUTIONS
1. IMPORTANT INFORMATION
A number of precautions are to be observed upon operation of the fan heater.
Improper operation as a result of ignoring precautions may harm health of the
Please, read this operation manual carefully prior to use of the fan heater.   user and other people, as well as damage their property.
This operation manual contains important information regarding your
safety, as well as recommendations on the proper operation of the unit and   1. Read all instructions prior to operation of the PTC Fan heater.
its maintenance.                                   2. The unit must be placed away from flammable and easily deformable objects.
Save this operation manual together with the guarantee card, cash register   3. Make sure that the unit’s case and the heating element cooled down prior to
receipt, if possible, cardboard box and packing material.   the unit is dismantled and packed for long-term storage.
The purchased fan heater can slightly differ from the one, described in the   4. When the unit is not operated for a long time, store it factory-packaged in a
manual, but that doesn’t affect the methods of its use and operation.
dry and cool place.
5. DO NOT COVER THE UNIT when it is operated. Do not dry clothes and any
other fabrics and materials on the unit. It may cause its overheating, failure or
inflict significant damage to you and/or your property.
IMPORTANT!
The manufacturer considers this type of failure a
nonguaranteed event.
2          www.timberk.com • Electric fan heater

6. To prevent the risk of an electric shock:        old outlets.
• Always disconnect the unit from the mains when it is not used! There is a slight   18. Poor contact between the power cord plug of the heater and an electric
chance of an electric shock due to static voltage Even if the unit is switched off.   outlet may result in overheating of the plug.
• Never use the unit in a situation when it can contact water.
• Never connect the unit to electric mains if its surface is damp (wet).
• If you discover any damage of the power cord, never switch on the unit,
but return the unit to an authorized service center of the manufacturer for an   IMPORTANT!
adequate repair.                                              If necessary, make sure to parlance old outlets.
7. Any electric appliance must always be kept watched, especially if there are   Use ~220V/50Hz electric mains to connect the heater.
children nearby it. Always watch out for children not to touch the unit by hand.   Make sure that electric appliances are not connected
8. Unplug the power cord from electric mains prior to preventive cleaning of the   to the same electric circuit (for example, an extension
unit, including upon a wet dust removal from its surface.     cord) used for the heater. Circuit overload may result in
9. To switch off the unit, set the main switch to «O» position (Off). Disconnect   failures of lighting, melting of wiring and fire.
the power cord plug from the outlet. Never pull the power cord and never
disconnect the plug abruptly.
10. Store the unit in a cool or warm place. Do not store the unit in a damp room.   19. The heater’s power cord must not be pressed down by furniture or be laid in
places where it can be easily stepped on.
11. The plug must match the standard outlet and enter it without any effort. If the   20. Do not use the fan heater in rooms with increased humidity, nearby bath-
plug doesn’t enter the outlet or enters it too tightly, turn the plug vertically 180°   rooms, shower bath, pools, ponds, i.e. in places where it may be tipped over
and try again. If you still cannot plug it then you need to call for an electrician to   into water, or water or water drops may contact it.
replace the electric outlet. Never use the unit if the plug is not fully connected to
the outlet.                                         21. Do not place the heater on uneven or unstable surfaces. It is also forbidden
12. If the power cord is damaged, it must be repaired by a skilled specialist.   to mount the above an electric coulter, provided that the hot air flow will contact
it.
Never try to repair it on your own. This may harm your health and affect the unit’s
guarantee maintenance.                              22. The heater is not designed for industrial application. It is used only as an
13. To prevent injuries or damage of the property due to overheating, fire or   additional means of heating.
explosion:                                          Make sure to take this information into consideration.
• do not place the heater nearby furniture and flammable objects.   23. Use this convector only in the manner, set forth in this manual. Any other
• do not dry clothes, towels or any other materials by means of the heater.   use, not recommended by the manufacturer, can result in a fire, electric shock
or injuring of people.
14. It is not recommended to use extension cords. If it is still necessary, try to use   24. The unit is not intended to be used by people (including children) with limited
the shortest possible extension cord with the wire strand section of the extension   physical, sensory or intellectual capabilities, having insufficient experience and
cord not less than the wire strand section of the cord of the fan heater.
knowledge, unless they are supervised or received instructions on how to use
Do not use an extension cord for more than one electric appliance at a time.   the unit from a person, responsible for their safety. It is necessary to be careful
Circuit overload can result in lighting malfunction, wiring melting and fire.  that children do not play with the appliance.
15. Do not leave the operating unit for a long time without any supervision.
16. Place the unit only vertically on even and dry surfaces.
17. Bad contact between the power cord plug of the heater and an electric
outlet may result in overheating of the plug. If necessary, make sure to replace
www.timberk.com • Electric fan heater    3