Мобильный кондиционер TIMBERK Edelweiss 2.0 FL700 MF (BL). Инструкция на русском языке

Instruction manual
Руководство по эксплуатации
Электрический              Electric
тепловентилятор            fan heater
TFH T05UFX                           Модель/Model:            TFH T05UFX
TFH S10MMS
Руководство по эксплуатации включает в себя гаратийный талон
Outlook of devices, aslo colour scores can be revised without any special advance
notices.
TFH S10MMS
Производитель вправе менять внешний вид прибора и цветовую гамму при-
бора без специального уведомления.

Dear customer!!                                              IMPORTANT!
Important precautions  and  instructions, contained  in
Thank you for good choice and purchase of Timberk electric fan   this manual, do not account for all possible modes and
heater. It will serve you for a long time.                   situations  to  be  encountered.  It  is  vital  to  understand
that common sense, caution and thoroughness are the
factors that are impossible to be built-in in any product.
Timberk electric fan heater is designed to heat and create a   These factors must be taken into consideration by man
comfortable environment indoors during cold season. The fan   who is interested in the proper operation of the unit.
heater can be installed only in a vertically on a rigid foundation,   The manufacturer does not bear any responsibility in
where there is possible to connect to 220-240V~, 50Hz single-  case when the unit or its parts are damaged during
phase power supply wiring.                                   transportation, as a result of improper instatllation,
voltage fluctuations, as well as if some part of the unit
The heater based on a standard metal ceramic and highly      was altered or modified.
reliable spiral heating element is convenient and easy-to-install,
economical in use in connection with minimum energy losses,
increased heat  exchange  and  effective  distribution  of the air
flow.                                                             2. PRECAUTIONS
Please, read this operation manual carefully prior to assembly
and use of the product.                            A number of precautions is to be observed upon operation of the fan heater.
Improper operation as a result of ignoring precautions may harm health of the
user and other people, as well as damage their property.
1. To prevent the risk of an electric shock:
1. IMPORTANT INFORMATION                   •  Always disconnect the unit from the mains when it is not used! There is a slight
chance of an electric shock due to static voltage Even if the unit is switched off.
Please, read this operation manual carefully prior to use of the fan heater.  •  Never use the unit in a situation when it can contact water.
This operation manual contains important information regarding your   •  Never connect the unit to electric mains if its surface is damp (wet).
safety, as well as recommendations on the proper operation of the unit and   •  If you discover any damage of the power cord, never switch on the unit,
its maintenance.                                   but return the unit to an authorized service center of the manufacturer for an
Save this operation manual together with the guarantee card, cash register   adequate repair.
receipt, if possible, cardboard box and packing material.  2. Any electric appliance must always be kept watched, especially if there are
The purchased fan heater can slightly differ from the one, described in the   children nearby it. Always watch out for children not to touch the unit by hand.
manual, but that doesn’t affect the methods of its use and operation.  3. Unplug the power cord from electric mains prior to preventive cleaning of the
unit, including upon a wet dust removal from its surface.
4. To switch off the unit, set the main switch to “O” position (Off). Disconnect the
power cord plug from the outlet.
NEVER PULL THE POWER CORD AND NEVER DISCONNECT THE PLUG
ABRUPTLY.
2          www.timberk.com • Electric fan heater

5. Store the unit in a cool or warm place. Do not store the unit in a damp room.  14. The heater’s power cord must not be pressed down by furniture or be laid in
6. The plug must match the standard outlet and enter it without any effort. If the   places where it can be easily stepped on.
plug doesn’t enter the outlet or enters it too tightly, turn the plug vertically 180°   15. Do not use the fan heater in rooms with increased humidity, nearby bath-
and try again.                                      rooms, shower bath, pools, ponds, i.e. in places where it may be tipped over
If you still cannot plug it then you need to call for an electrician to replace the   into water, or water or water drops may contact it.
electric outlet. Never use the unit if the plug is not fully connected to the outlet.  16. Do not place the heater on uneven or unstable surfaces. It is also forbidden
7. If the power cord is damaged, it must be repaired by a skilled specialist. Never   to mount the above an electric coutler, provided that the hot air flow vill contact it.
try to repair it on your own. This may harm your health and affect the unit’s   17. The heater is not designed for industrial application. It is used only as an
guarantee maintenance.                              additional means of heating.
8. To prevent injuries or damage of the property due to overheating, fire or   Make sure to take this information into consideration.
explosion:
•  do not place the heater nearby furniture and flammable objects.  3. WORKING PARAMETERS
•  do not dry clothes, towels or any other materials by means of the heater.
9. It is not recommended to use extension cords. If it is still necessary, try to use   Main features
the shortest possible extension cord with the wire strand section of the extension
cord not less than the wire strand section of the cord of the fan heater.  1. Thanks to its small size and weight, the fan heater is convenient to be
DO NOT USE AN EXTENSION CORD FOR MORE THAN ONE ELECTRIC   placed in any room where additional air heating is required.
APPLIANCE AT A TIME. CIRCUIT OVERLOAD CAN RESULT IN LIGHTING   2. Durable and flameproof metal-ceramic heating element provides quick
MALFUNCTION, WIRING MELTING AND FIRE.               and effective air heating, doesn’t pollute the environment and doesn’t burn
10. Do not leave the operating unit for a long time without any supervision.  oxygen.
11. Place the unit only vertically on even and dry surfaces.  3. Highly reliable spiral heating element.
12. Bad contact between the power cord plug of the heater and an electric   4. Direct current electric motor with low noise.
outlet may result in overheating of the plug. If necessary, make sure to replace   5. A fuse and thermal limiter protect the fan heater from overheating.
old outlets.
13. Poor contact beween the pover cord plug of the heater and an electric outler
may result in overhaeting of the plug.                        NOTE:
Apperance of smell/smoke is possible at first use. Do
IMPORTANT!                                          not care, this means that an oll drop got oto the glowing
spiral during manufacturing. The drop will quickly
If nessary, make sure to perlance old outlets.      evanorate and no smoke/ smell will appear anymore.
Use 220-240V~/50Hz electric mains to connect the
heater.
Make  sure  that  electric  applianses  are not connected
to the same electric circuit (for example, an extension
cord) used for the heater. Circuit overload may result in
failures of lightng, melting of wiring and fire.
www.timberk.com • Electric fan heater    3