Встраиваемая вытяжка GORENJE Plus GHF 62 X. Инструкция на русском языке

GHF62X
User manual
Bedienungsanleitung
Uporabniski prirocnik
Uzivatelska prirucka
Руководство пользователя
Посібник користувача
LIB0017168

EN - Instruction on mounting and use
Closely follow the instructions set out in this manual. All   the oil does not overheat and ignite.
responsibility,  for any eventual inconveniences, damages or   Accessible parts of the hood may became hot when used with
fires caused by not complying with the instructions in this   cooking appliance.
manual, is declined. The hood is conceived for the suction of   With regards to the technical and safety measures to be
cooking fumes and steam and is destined only for domestic   adopted for fume discharging it is important to closely follow
use.                                     the regulations provided by the local authorities.
The hood can look different to that illustrated in the   The hood must be regularly cleaned on both the inside and
drawings in this booklet. The instructions for use,   outside (AT LEAST ONCE A MONTH).
maintenance and installation, however, remain the same.     This must be completed in accordance with the maintenance
!   It is important to conserve this booklet for consultation at   instructions  provided in this manual).  Failure to follow  the
any moment. In the case of sale, cession or move, make   instructions provided in this user guide regarding the cleaning
sure it is together with the product.     of the hood and filters will lead to the risk of fires.
!   Read the instructions carefully: there is important   Do not use or leave the hood without the lamp correctly
information about installation, use and safety.    mounted due to the possible risk of electric shocks.
!   Do not carry out electrical or mechanical variations on the   We will not accept any responsibility for any faults, damage or
product or on the discharge conduits.   fires caused to the appliance as a result of the non-
Note: the elements marked with the symbol “(*)” are optional   observance of the instructions included in this manual.
accessories supplied only with some models or elements to   This appliance is marked according to the European directive
purchase, not supplied.                  2002/96/EC on Waste Electrical and  Electronic Equipment
(WEEE). By ensuring this product is disposed of correctly, you
Caution                             will help prevent potential  negative consequences for the
WARNING! Do not connect the appliance to the mains until   environment and  human health,  which could otherwise be
the installation is fully complete.      caused by inappropriate waste handling of this product.
Before  any cleaning or maintenance operation, disconnect
hood from the mains by removing the plug or disconnecting
the mains electrical supply.             The symbol    on the product, or on the documents
Always wear work gloves for all installation and maintenance   accompanying the product, indicates that this appliance may
operations.                              not be treated as household waste. Instead it should be taken
The appliance is not intended for use by children or persons   to the appropriate collection point for the recycling of electrical
with impaired physical, sensorial or mental faculties,  or if   and electronic equipment. Disposal must be carried out in
lacking in experience or knowledge, unless they are  under   accordance with local environmental regulations for waste
supervision or have been trained in the use of the appliance   disposal.
by a person responsible for their safety.   For further detailed information  regarding the process,
This appliance is designed to be operated by adults, children   collection and recycling of this product, please  contact the
should be monitored to ensure that they do not play with the   appropriate department of your local authorities or  the local
appliance.                               department  for household waste  or the shop where you
This appliance is designed to be operated by adults.  Children   purchased this product.
should not be allowed to tamper with the controls or play with
the appliance.
Never use the hood without effectively mounted grating!
The hood must NEVER be used as a support surface unless
specifically indicated.
The premises where the appliance is installed must be
sufficiently ventilated, when the kitchen hood is used together
with other gas combustion devices or other fuels.
The ducting system for this appliance must not be connected
to any existing ventilation system which is being used for any
other purpose such as discharging exhaust  fumes from
appliances burning gas or other fuels.
The flaming of foods beneath the hood itself is severely
prohibited.
The use of exposed flames is  detrimental to the filters and
may cause a fire risk, and must therefore be avoided in all
circumstances.
Any frying must be done with care in order to make sure that
16

Use                                           Electrical connection
The hood is designed to be used either for exhausting or filter   The mains  power  supply must correspond to the rating
version.                                 indicated on the plate situated inside the hood. If provided with
a plug connect the hood to a socket in compliance with current
regulations  and positioned in  an accessible area, after
installation. If it not fitted with a plug (direct mains connection)
Ducting version                    or if the plug is  not located in an accessible area, after
In this case the fumes are conveyed outside of the building by   installation,  apply a double pole switch in accordance with
means of a special pipe connected with the connection ring   standards which assures the complete disconnection of the
located on top of the hood.              mains under conditions relating to over-current category III, in
Attention! The exhausting pipe is not supplied and must be   accordance with installation instructions.
purchased apart.                         Warning! Before re-connecting the hood circuit to the mains
Diameter of the exhausting pipe must be equal to that of the   supply and checking the efficient function, always check that
connection ring.                         the mains cable is correctly assembled.
In the  horizontal runs the exhausting pipe must be slightly   The hood is provided with a special power cable ; if the cable
slanted (about 10°) and directed upwards to vent the air easily   is damaged, request a new one from Technical Service.
from the room to the outside.
Attention!  If the hood is supplied with active charcoal  filter,   Mounting
then it must be removed.                 Before beginning installation:
Connect the hood and discharge holes on the walls with a   •   Check that the product purchased is of a suitable size for
diameter equivalent to the air outlet (connection flange).   the chosen installation area.
!   Use a duct of the minimum indispensible length.   •   Remove the charcoal (*) filter/s if supplied (see also
!   Use a duct with as few elbows as possible (maximum   relative paragraph). This/these is/are to be mounted only
elbow angle: 90°).                       if you want lo use the hood in the filtering version.
!   Avoid drastic changes in the duct cross-section.   •   Check  (for transport reasons) that there is no other
!   Use a duct as smooth as possible inside.   supplied material inside the hood (e.g. packets with
!   The duct must be made of certified material.   screws (*), guarantees (*), etc.), eventually removing
them and keeping them.
•   If possible, disconnect and move freestanding or slide-in
range from cabinet opening to provide easier access to
Filter version                        rear wall/ceiling.  Otherwise  put a thick, protective
One active charcoal filter is needed for this and can be   covering over countertop,  cooktop or range to protect
obtained from your usual retailer.          from damage and debris. Select a flat surface for
The filter removes the grease and smells from the extracted   assembling the unit. Cover that surface with a protective
air before sending it back into the room through the upper   covering and place all canopy hood parts and hardware
outlet grid.                                in it.
•   In addition check whether near the installation area of the
Attention! If the hood is not supplied with carbon filter,   hood (in the area accessible also with the hood mounted)
then it must be ordered and mounted.        an electric socket  is available and it is possible to
connect a fumes discharge device to the outside (only
Installation                                suction version).
The minimum distance between the supporting surface for the   •   Carry  out all the masonry  work  necessary (e.g.
cooking equipment  on the hob and the lowest part of  the   installation of an electric socket and/or a hole for the
range hood must be not less than 50cm from electric cookers   passage of the discharge tube).
and 65cm from gas or mixed cookers.
If  the instructions  for installation for the gas hob specify a   This hood is designed for fitting in a cabinet or on some other
greater distance, this must be adhered to.   support.
17