Сплит-система CARRIER 42 UQV 060 M/38 UYV 060 M. Инструкция на русском языке

OWNER’S MANUAL
ENGLISH
ESPANOL
FRANCAIS
PORTUGUES
PУCСКИЙ
????????
AIR CONDITIONER (SPLIT TYPE)
For general public use
Indoor unit
42UQV025M, 035M, 050M, 060M Series
Outdoor unit
38UYV025M, 035M, 050M, 060M Series
1110655103
1/31/13   4:34 PM
Carrier1110655103(CVF).indd   1                                                            1/31/13   4:34 PM
Carrier1110655103(CVF).indd   1

PRECAUTIONS FOR SAFETY
DANGER                                         CAUTION
•   Do not install, repair, open or remove the cover. It may expose you to dangerous   •   Check that the circuit breaker is installed correctly. If the circuit breaker is not
voltages. Ask the dealership or the specialist to do this.  properly installed, it may cause an electric shock. To check the installation method,
•  Turning off the power supply will not prevent potential electric shock.  please contact the supplying retail dealership or the professional vendor who
•   The appliance shall be installed in accordance with national wiring regulation.  installed the unit.
•   Means for disconnection from the supply having a contact separation of at least   •  When using the unit in a closed room, or operating with other combustion
3 mm in all poles must be incorporated in the fixed wiring.  appliances, make sure to open a window occasionally for ventilation. Insufficient
ventilation may cause suffocation due to a lack of oxygen.
WARNING                    •  Avoid operating for long periods in a high humidity environment (over 80%) such as
with the windows or doors open. There may be condensation on the indoor unit and
•  Do not expose your body directly to cool air for a long time.  droplets may fall onto the furniture.
•  Do not insert your finger or any article into the air inlet/outlet.  •   When the unit won’t be used for a long time, turn off the main switch or the circuit
•  When an abnormality (burning smell, etc.) occurs, stop the air conditioner and turn   breaker.
off the circuit breaker.                     •  It is recommended that maintenance be performed by a specialist when the unit has
•  Installation must be requested from the supplying retail dealership or professional   been operated for a long time.
installation vendors. Installation requires special knowledge and skill. If customers   •  At least once a year check if the mounting table of the outdoor unit is damaged or
install on their own, it can be a cause of fire, electric shock, injury or water leakage.   not. If a damaged state is ignored, the unit may fall or over-turn, causing an injury.
•  Do not select a location for installation where flammable gas may leak. If there is   •  Stand on a sturdy ladder when attaching/detaching the front panel/air filter/air
any gas leakage or accumulation around the unit, it can be a cause of fire.   cleaning filter. Failure to do so may cause a fall or injury.
•  Do not turn ON/OFF the circuit breaker or operate buttons with a wet hand. It may   •  Do not stand on the outdoor unit or place anything on the unit. It may be the cause
be a cause of electric shock.                 of injury due to falling or over-turning. Any damage to the unit may cause an electric
•  Do not disassemble, modify or relocate the unit by yourself. It may become the   shock or fire.
cause of fire, electric shock, or water leakage. For repair or relocation, please   •  Do not use combustion appliances in the direct flow of the air from the air-
request service from the supplying retail dealership.   conditioning unit. Poor combustion of a combustion appliance may cause suffocation.
•  Do not select a location for installation where there may be excessive water or   •  Do not place anything around the outdoor unit or allow fallen leaves to accumulate
humidity, such as a bathroom. Deterioration of insulation may be a cause of electric   around it. If there are fallen leaves, small animals could enter and contact internal
shock or fire.                                electrical parts, causing a failure or fire.
•  When relocating or repairing the unit, please contact the supplying retail   •  Do not place animals and plants in places where wind from the air-conditioning unit
dealership. When there is a kink in the wiring, it may be the cause of electric shock   flows directly. It may have a negative influence on the animal or plant.
or fire.                                     •  Ensure that drained water is discharged. When the discharging water process is
•  During an error (such as a burning odor, not cooling, or not warming), stop   not sufficient, water may leak, causing water damage to furniture. To check that the
operating the unit and turn off the circuit breaker. Continuous operation may be a   installation method used is correct, please contact the supplying retail dealership or
cause of fire, or electric shock. Please request repair or service from the supplying   the professional vendor who installed the unit.
retail dealership.                           •  Do not place any containers such as a vase containing fluid on the unit. It might
•  Earth work should be requested from the supplying retail dealership or   cause water to enter the unit and deteriorate the electrical insulation, causing an
professional vendors. Insufficient grounding work may be the cause of electric   electric shock.
shock. Do not connect the earth wire to a gas pipe, water pipe, lightning conductor,   •  Do not use for special applications such as storage of food or animals, or to display
or telephone earth wire.                      plants, precision devices, or art objects. Do not use on ships or in other vehicles.
•  If the indoor unit piping outlet is exposed due to relocation, close the opening.   It may cause a failure in the air-conditioning unit. In addition, it may damage these
Touching internal electrical parts may cause injury or electric shock.   items.
•  Do not insert any material (metal, paper, or water, etc) into the air outlet or air   •  Do not place other electrical appliances or furniture under the unit.  Water droplets
intake opening. Fan may be rotating at high speed inside or there are high voltage   might fall, causing damage or failure.
sections, which may cause an injury or electric shock.  •  When cleaning, you must stop operating the unit and turn off the circuit breaker.
•  You must use a independent power outlet for the power supply. If a power outlet   Since the fan inside may be rotating at high speed, it may cause an injury.
other than the independent outlet is used, it may cause a fire.   •  Do not wash the main air-conditioning unit with water. It may cause an electric shock.
•  When the air-conditioning unit does not cool or warm, there may be a leakage of   •  After the front panel/air filter is cleaned, wipe away any water and allow to dry. If
refrigerant. Please consult the supplying retail dealership. The refrigerant used in   water remains, it may cause an electric shock.
the air-conditioning unit is safe. It will not leak under normal operating conditions   •  Once the front panel is removed, do not touch the metal parts of the unit. It may
but if it leaks into the room and contacts a heat source such as a heater, or stove,   cause an injury.
it may cause a harmful reaction.             •  Do not touch the air intake section or the aluminum fins of the unit. It may cause
•  When water or other foreign substances enter the internal parts, stop operating the   injury.
unit immediately and turn off the circuit breaker. Operating the unit continuously   •  When you hear thunder and there might be a lightning strike, stop operating the unit
may cause fire or electric shock. Please contact the supplying retail dealership for   and disconnect the circuit breaker. If lightning strikes, it may cause a failure.
repair.
•  Do not clean the inside of the air-conditioning unit yourself. Please request internal   •   Batteries for remote control unit:
cleaning of the air-conditioning unit from the supplying retail dealership. Incorrect   -  Should be inserted with correct polarity (+) and (-).
cleaning may cause breakage of resin parts or insulation defects of electrical parts,   -  Should not be recharged.
causing water leakage, electric shock or fire.  -  Do not use batteries for which the “Recommended usage period” has expired.
•   Do not damage or modify the power cable. Do not connect the cable midway, or   -  Do not keep used batteries inside the remote control unit.
use a multiple outlet extension cord that is shared by other devices. Failure to do   -  Do not mix different types of batteries, or mix new batteries with old ones.
so may cause fire.                            -  Do not directly solder the batteries.
•   Do not place heavy objects on the power cable, expose it to heat, or pull it. To do   -  Do not short-circuit, disassemble, heat, or throw batteries into a fire. If batteries
so may cause electrical shock or fire.          are not disposed of correctly, they may burst or be the cause of fluid leakage,
•   This appliance is not intended for use by persons (including children) with reduced   resulting in burns or injuries. If touching the fluid, wash thoroughly with water. If it
physical, sensory or mental capabilities, or lack of experience and knowledge,   touches devices, wipe off to avoid direct contact.
unless they have been given supervision or  instruction concerning use of the   -  Do not place within reach of small children. If a battery is swallowed, consult a
appliance by a person responsible for their safety.  doctor immediately.
•   Children should be supervised to ensure that they do not play with the appliance.  •   The manufacturer shall not assume any liability for the damage caused by not
•   Do not use any refrigerant different from the one specified for complement or   observing the description of this manual.
replacement.
Otherwise, abnormally high pressure may be generated in the refrigeration cycle,
which may result in a failure or explosion of the product or an injury to your body.
1   INDOOR UNIT DISPLAY
Models : 42UQV035M, 050M, 060M Series           Models : 42UQV025M Series
1    2    3     4    5       1   Hi POWER                          1   OPERATION
2   FILTER                            2   TIMER
3   PREHEAT/DEFROST                   3   RESET button
3   2  1
4   TIMER
5   OPERATION
6   RESET button
6
2/6/13   3:19 PM
Carrier1110655103(01_EN).indd   2
Carrier1110655103(01_EN).indd   2                                                          2/6/13   3:19 PM

2  PREPARATION BEFORE USE                       5  AUTOMATIC OPERATION
Preparing Filters                               To automatically select cooling, heating or fan only operation
1. Open the air inlet grille and remove the air filters.  1.  Press    : Select A.
2. Attach the filters. (see detail in the accessory sheet).
Loading Batteries (when use wireless operation.)  2.  Press    : Set the desired temperature.
1. Remove the slide cover.
3.  Press    : Select AUTO, LOW  , LOW+   , MED   , MED+  ,
2. Insert 2 new batteries (AAA type)
or HIGH   .
following the (+) and (–) positions.
Clock Setup
6  COOLING / HEATING / FAN ONLY OPERATION
1. Push    by tip of the pencil.
If timer indication is flashing, go to the next step 2.
1.  Press    : Select Cool   , Heat   , or Fan only   .
EN
2. Press    or    : adjust the time.          2.  Press    : Set the desired temperature.
Cooling: Min. 17°C, Heating: Max. 30°C, Fan Only:
3. Press    : Set the time.                     No temperature indication
Remote Control Reset                            3.  Press    : Select AUTO, LOW  , LOW+   , MED   , MED+  ,
Push    by tip of the pencil or                 or HIGH   .
1. Remove the battery.
2. Press   .                                  7  DRY OPERATION
3. Insert the battery.
For dehumidification, a moderate cooling performance is controlled automatically.
3  AIRFLOW DIRECTION                             1. Press    : Select Dry  .
2. Press    : Set the desired temperature.
Press    : Move the louver in              8  Hi-POWER OPERATION
1  the desired vertical direction.
To automatically control room temperature and airflow for faster cooling or heating
operation (except in DRY and FAN ONLY mode)
Press     : Start and stop the operation.
Press    : Swing the air
2  automatically and press again to stop.     9  ECO OPERATION
To automatically control room to save energy (except in DRY and FAN ONLY
mode)
Press    : Start and stop the operation.
3  For horizontal direction, adjust           Note:  Cooling operation; the set temperature will increase automatically 1 degree/
manually.
hour for 2 hours (maximum 2 degrees increase). For heating operation the
set temperature will decrease.
Note:
•  Do not move the louver manually by others.
•  The louver may automation positioning by some operation mode.  10  TEMPORARY OPERATION
In case of the misplaced or discharged remote control
4  REMOTE CONTROL                                 •  Pressing the RESET button, the unit can start or
stop without using the remote control.
1   Infrared signal emitter      1                •   Operation mode is set on AUTOMATIC operation,
2   Start/Stop button (  )                         preset temperature is 24°C and fan operation is
3   Mode select button (  )                        automatic speed.
4   Temperature button (  )
5   Fan speed button (  )                      11  TIMER OPERATION
6   Swing louver button (  )
7   Set louver button (  )  $                   Set the timer when the air conditioner is operating.
4
8   On timer button (  )                              Setting ON Timer      Setting OFF Timer
2                 6
9   Off timer button (  )                 5      1  Press    :  Set the desired ON   Press    :  Set the desired OFF
3                 7                 timer.             timer.
!   ECO Sleep button (  )                 (
"   Setup button (  )   &                 %      2  Press    : Set the timer.  Press    : Set the timer.
#   Clear button (  )
#
$   Memory and Preset button (  )  8             3  Press    : Cancel the timer.  Press    : Cancel the timer.
%   High power button (  )  !             9
&   Economy button (  )                   "     Daily timer allows the user to set both the ON & OFF timers and will be
+                 ,
(   Quiet button (  )   ~                 )     activated on a daily basis.
)   Filter reset button (  )
Setting Everyday Timer
~   Set clock button (  )
+   Check button (  )
1  Press     : Set the ON timer.  3
,   Reset button (  )                                                     Press   .
Note:                                            2  Press    : Set the OFF timer.  4  Press    button during
•  The provided Remote Controller is a wireless type, which also can be used as   the (  or  ) mark flashing.
a wire. Please see “How to Connect The Remote Controller for Wired
Operation”, located in installation instruction, in case of wired control is required.  •   During the every day timer is activating, both arrows ( ,  ) are indicated.
•  In wire operation, remote controller will return to initial condition (PRESET,   Note:
TIMER and CLOCK will return to initial condition) when user shutdown power   •   Keep the remote control in accessible transmission to the indoor unit;
supply of Air conditioner.
otherwise, the time lag of up to 15 minutes will occur.
•   The setting will be saved for the next same operation.
Carrier1110655103(01_EN).indd   3                                                          2/6/13   3:19 PM
2/6/13   3:19 PM
Carrier1110655103(01_EN).indd   3