Аккумуляторная дрель-шуруповёрт SKIL 2017 AB. Инструкция на русском языке

CORDLESS DRILL/DRIVER
2016 (F0152016..)
2017 (F0152017..)
ME77
66
70
74
78
82
28
86
31
89
35
92
39
96
42
46                                    99
50                                   103
107
53
111
57
122
61                                   120
08/12                            2610Z03357

ACCESSORIES                                        WWW.SKIL.COM
6

d)  Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
Cordless drill/driver      2016/2017     moving parts. Damaged or entangled cords increase
the risk of electric shock.
INTRODUCTION                           e)  When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
•  This tool is intended for drilling in wood, metal, brick,   cord suitable for outdoor use reduces the risk of electric
stone, ceramic and plastic as well as for screwdriving   shock.
in wood                              f)  If operating a power tool in a damp location is
•  This tool is not intended for professional use  unavoidable, use an earth leakage circuit breaker.
•  Read and save this instruction manual ?
Use of an earth leakage circuit breaker reduces the risk
of electric shock.
TECHNICAL SPECIFICATIONS ?             3)  PERSONAL SAFETY
Max. torque for hard screwdriving application according to   a)  Stay alert, watch what you are doing and use
ISO 5393 : 28 Nm (2016) / 30 Nm (2017)   common sense when operating a power tool. Do
not use a power tool while you are tired or under
TOOL ELEMENTS ?                          the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
A   Switch for on/off and speed control  result in serious personal injury.
B   Switch for changing direction of rotation
b)  Use personal protective equipment. Always wear
C   Keyless chuck                        eye protection. Protective equipment such as dust
D   Ring for torque control              mask, non-skid safety shoes, hard hat, or hearing
E   Ventilation slots
protection used for appropriate conditions will reduce
F  Charger                               personal injuries.
G   Green charging light
c)  Prevent unintentional starting. Ensure the switch
H   Red charging light                   is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
SAFETY                                   the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
GENERAL SAFETY INSTRUCTIONS
invites accidents.
WARNING! Read all safety warnings and all   d)  Remove any adjusting key or wrench before turning
instructions. Failure to follow the warnings and instructions   the power tool on. A wrench or a key left attached to
may result in electric shock, fire and/or serious injury. Save   a rotating part of the power tool may result in personal
all warnings and instructions for future reference. The   injury.
term "power tool" in the warnings refers to your mains-  e)  Do not overreach. Keep proper footing and balance
operated (corded) power tool or battery-operated (cordless)   at all times. This enables better control of the power
power tool.                              tool in unexpected situations.
f)  Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
1)  WORK AREA SAFETY
a)  Keep work area clean and well lit. Cluttered or dark   from moving parts. Loose clothes, jewelry or long hair
areas invite accidents.                can be caught in moving parts.
b)  Do not operate power tools in explosive   g)  If devices are provided for the connection of dust
atmospheres, such as in the presence of flammable   extraction and collection facilities, ensure these are
liquids, gases or dust. Power tools create sparks   connected and properly used. Use of dust collection
which may ignite the dust or fumes.    can reduce dust-related hazards.
c)  Keep children and bystanders away while operating   4)  POWER TOOL USE AND CARE
a power tool. Distractions can cause you to lose   a)  Do not force the power tool. Use the correct power
control.                               tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
2)  ELECTRICAL SAFETY
a)  Power tool plugs must match the outlet. Never   designed.
modify the plug in any way. Do not use any adapter   b)  Do not use the power tool if the switch does not
plugs with earthed (grounded) power tools.   turn it on and off. Any power tool that cannot be
Unmodified plugs and matching outlets will reduce risk   controlled with the switch is dangerous and must be
of electric shock.                     repaired.
b)  Avoid body contact with earthed or grounded   c)  Disconnect the plug from the power source and/or
surfaces such as pipes, radiators, ranges and   the battery pack from the power tool before making
refrigerators. There is an increased risk of electric   any adjustments, changing accessories, or storing
shock if your body is earthed or grounded.  power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
c)  Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
7