Рубанок SKIL 1550 LA. Инструкция на русском языке

55
58
62
65
69
72
74
77
80
83
86
89
93
08/13                           2610Z05080

ACCESSORIES                                        WWW.SKIL.COM
4

conditions. Water entering a power tool will increase
the risk of electric shock.
d)  Do not abuse the cord. Never use the cord for
Planer                          1550     carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
INTRODUCTION                             moving parts. Damaged or entangled cords increase
the risk of electric shock.
•  This tool is intended for planing wooden materials such   e)  When operating a power tool outdoors, use an
as beams and boards; it is also suitable for chamfering   extension cord suitable for outdoor use. Use of a
edges
•  This tool is not intended for professional use  cord suitable for outdoor use reduces the risk of electric
•  Read and save this instruction manual ?  shock.
f)  If operating a power tool in a damp location is
TECHNICAL DATA ?                         unavoidable, use an earth leakage circuit breaker.
Use of an earth leakage circuit breaker reduces the risk
of electric shock.
TOOL ELEMENTS ?                        3)  PERSONAL SAFETY
a)  Stay alert, watch what you are doing and use
A    Storage for key
common sense when operating a power tool. Do
B   Securing bolt                        not use a power tool while you are tired or under
C   Cutter block screws
the influence of drugs, alcohol or medication. A
D   Knob for setting planing depth       moment of inattention while operating power tools may
E   Planing depth indicator
result in serious personal injury.
F   Vacuum cleaner adapter
b)  Use personal protective equipment. Always wear
G   Chip outlet                          eye protection. Protective equipment such as dust
H    Park rest
mask, non-skid safety shoes, hard hat, or hearing
J   Safety switch                        protection used for appropriate conditions will reduce
K   On/off switch
personal injuries.
L   V-groove
c)  Prevent unintentional starting. Ensure the switch
M   Ventilation slots
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
SAFETY
the tool. Carrying power tools with your finger on the
GENERAL SAFETY INSTRUCTIONS              switch or energising power tools that have the switch on
invites accidents.
WARNING! Read all safety warnings and all   d)  Remove any adjusting key or wrench before turning
instructions. Failure to follow the warnings and instructions   the power tool on. A wrench or a key left attached to
may result in electric shock, fire and/or serious injury. Save   a rotating part of the power tool may result in personal
all warnings and instructions for future reference. The   injury.
term "power tool" in the warnings refers to your mains-  e)  Do not overreach. Keep proper footing and balance
operated (corded) power tool or battery-operated (cordless)   at all times. This enables better control of the power
power tool.                              tool in unexpected situations.
f)  Dress properly. Do not wear loose clothing or
1)  WORK AREA SAFETY                     jewelry. Keep your hair, clothing and gloves away
a)  Keep work area clean and well lit. Cluttered or dark   from moving parts. Loose clothes, jewelry or long hair
areas invite accidents.                can be caught in moving parts.
b)  Do not operate power tools in explosive   g)  If devices are provided for the connection of dust
atmospheres, such as in the presence of flammable   extraction and collection facilities, ensure these are
liquids, gases or dust. Power tools create sparks   connected and properly used. Use of dust collection
which may ignite the dust or fumes.    can reduce dust-related hazards.
c)  Keep children and bystanders away while operating   4)  POWER TOOL USE AND CARE
a power tool. Distractions can cause you to lose   a)  Do not force the power tool. Use the correct power
control.                               tool for your application. The correct power tool will
2)  ELECTRICAL SAFETY                    do the job better and safer at the rate for which it was
a)  Power tool plugs must match the outlet. Never   designed.
modify the plug in any way. Do not use any adapter   b)  Do not use the power tool if the switch does not
plugs with earthed (grounded) power tools.   turn it on and off. Any power tool that cannot be
Unmodified plugs and matching outlets will reduce risk   controlled with the switch is dangerous and must be
of electric shock.                     repaired.
b)  Avoid body contact with earthed or grounded   c)  Disconnect the plug from the power source and/or
surfaces such as pipes, radiators, ranges and   the battery pack from the power tool before making
refrigerators. There is an increased risk of electric   any adjustments, changing accessories, or storing
shock if your body is earthed or grounded.  power tools. Such preventive safety measures reduce
c)  Do not expose power tools to rain or wet   the risk of starting the power tool accidentally.
5