Дрель MAKITA HP1631K. Инструкция на русском языке

ENGLISH
INSTRUCTION MANUAL
Hammer Drill
HP1630
HP1631
008892
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

ENGLISH
SPECIFICATIONS
Model                      HP1630            HP1631
Concrete           16 mm             16 mm
Capacities          Steel            13 mm             13 mm
Wood              30 mm             30 mm
-1
No load speed (min )           0 - 3,200         0 - 3,200
Blows per minute             0 - 48,000         0 - 48,000
Overall length               296 mm            295 mm
Net weight                  1.9 kg             1.9 kg
Safety class                  /II               /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
END201-4
instructions may result in  electric shock,  fire and/or
Symbols                              serious injury.
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.   Save all warnings and
?  Read instruction manual.   instructions for future reference.
The  term "power  tool" in  the warnings refers  to your
? DOUBLE INSULATION          mains-operated (corded) power tool or battery-operated
(cordless) power tool.
?  Only for EU countries     Work area safety
Do not dispose of electric  equipment   1.   Keep work area clean and well lit. Cluttered or
together with household waste material!   dark areas invite accidents.
In observance of  European Directive   2.   Do not operate power tools  in explosive
2002/96/EC on  waste electric and   atmospheres, such as  in the presence of
electronic  equipment  and  its  flammable liquids, gases or dust. Power tools
implementation in accordance with   create sparks which may ignite the dust or fumes.
national law, electric  equipment that   3.   Keep children and bystanders away  while
have reached the end of their life must   operating a power tool. Distractions can cause
be collected separately and returned to   you to lose control.
an   environmentally  compatible  Electrical Safety
recycling facility.
ENE039-1   4.   Power tool plugs must match the outlet. Never
Intended use                             modify the plug in any  way. Do not use any
The tool is intended for impact drilling in brick, concrete   adapter plugs with earthed (grounded) power
and stone as well as for drilling without impact in wood,   tools. Unmodified plugs and matching outlets will
metal, ceramic and plastic.              reduce risk of electric shock.
ENF002-1   5.   Avoid body contact with earthed or grounded
Power supply                             surfaces such as pipes, radiators, ranges and
The tool should be connected only to a power supply of   refrigerators.  There is an increased risk of
the  same voltage  as indicated on the nameplate,  and   electric shock if your body is earthed or grounded.
can only be operated on single-phase AC supply. They   6.   Do not expose  power tools to rain or  wet
are double-insulated in accordance with European   conditions. Water  entering a  power tool  will
Standard and can, therefore, also be used from sockets   increase the risk of electric shock.
without earth wire.                   7.   Do not abuse the cord. Never use the cord for
GEA005-2   carrying, pulling or unplugging the power tool.
General Power Tool Safety                Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or  entangled  cords
Warnings                                 increase the risk of electric shock.
WARNING Read all safety  warnings and all   8.   When operating a power tool outdoors, use an
instructions. Failure  to  follow the warnings and   extension cord suitable for outdoor use. Use of
2

a cord suitable for outdoor use reduces the risk of   preventive safety measures reduce  the risk of
electric shock.                      starting the power tool accidentally.
9.   If operating a power tool in a damp location is   20.  Store idle power tools out of the  reach of
unavoidable, use a ground fault circuit   children and do not allow persons unfamiliar
interrupter (GFCI) protected supply. Use of an   with the power  tool or these instructions to
GFCI reduces the risk of electric shock.   operate the power  tool.  Power tools are
Personal Safety                          dangerous in the hands of untrained users.
10.  Stay alert, watch what you are doing and use   21.  Maintain power tools. Check for misalignment
common sense when operating a power tool.   or binding of moving parts, breakage of parts
Do not use a power tool while you are tired or   and any  other condition that  may  affect the
under the  influence of drugs, alcohol or   power tool's operation. If damaged, have the
medication.  A  moment of inattention while   power tool repaired before use. Many accidents
operating power tools may result  in  serious   are caused by poorly maintained power tools.
personal injury.                  22.  Keep cutting tools  sharp and clean. Properly
11.  Use personal protective equipment.  Always   maintained cutting tools with sharp cutting edges
wear eye protection. Protective equipment such   are less likely to bind and are easier to control.
as dust mask, non-skid safety shoes, hard hat, or   23.  Use the power tool, accessories and tool bits
hearing protection used for appropriate conditions   etc. in  accordance  with these instructions,
will reduce personal injuries.       taking  into account the  working  conditions
12.  Prevent unintentional starting. Ensure the   and the work to be performed. Use of the power
switch is in the off-position before connecting   tool for operations different from  those  intended
to power source and/or battery pack, picking   could result in a hazardous situation.
up or carrying the tool. . Carrying  power tools   SERVICE
with your finger on the switch or energising power   24.  Have your power tool serviced by a qualified
tools that have the switch on invites accidents.   repair person using only identical replacement
13.  Remove any adjusting key or  wrench before   parts. This will ensure that the safety of the power
turning the power tool on. A wrench or a key left   tool is maintained.
attached to a rotating part of the power tool may   25.  Follow  instruction  for  lubricating  and
result in personal injury.           changing accessories.
14.  Do not overreach. Keep proper footing and   26.  Keep handles dry, clean and free from oil and
balance at all times. This enables better control   grease.
of the power tool in unexpected situations.                     GEB003-2
15.  Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves   SPECIFIC SAFETY RULES
away from moving parts. Loose clothes,   DO NOT let comfort or familiarity  with product
jewellery or long hair  can  be  caught in moving   (gained from repeated use) replace strict adherence
parts.                           to hammer drill safety rules. If  you use this power
16.  If devices are provided for the connection of   tool unsafely or incorrectly, you can suffer serious
dust extraction and collection facilities,   personal injury.
ensure these are connected and properly used.   1.   Wear ear protectors  with  impact drills.
Use  of dust collection can reduce  dust-related   Exposure to noise can cause hearing loss.
hazards.                          2.   Use auxiliary handles  supplied  with the tool.
Power tool use and care                  Loss of control can cause personal injury.
17.  Do not force the power tool. Use the correct   3.   Hold power tools by insulated gripping
power tool for  your application. The  correct   surfaces when performing an operation where
power tool will do the job better and safer at the   the cutting tool may contact hidden wiring or
rate for which it was designed.      its own cord. Contact with a "live" wire will make
18.  Do not use the power tool if the switch does   exposed metal parts of the tool "live" and shock
not turn it on and off. Any power tool that cannot   the operator.
be controlled  with the switch  is dangerous  and   4.   Always be sure you have a firm footing.
must be repaired.                    Be sure no one is below when using the tool in
19.  Disconnect the plug from the power source   high locations.
and/or the battery  pack  from the  power tool   5.   Hold the tool firmly with both hands.
before making any adjustments, changing   6.   Keep hands away from rotating parts.
accessories, or  storing power  tools. Such   7.   Do not leave the tool running. Operate the tool
3