На сайте 124189 инструкций общим размером 502.82 Гб , которые состоят из 6278654 страниц
Руководство пользователя MAKITA FS2300. Основные функции, характеристики и условия эксплуатации изложены на 8 страницах документа в pdf формате.
Доступно к просмотру 8 страниц. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
INSTRUCTION MANUAL Drywall Screwdriver ENGLISH (Original instructions) FS2200 FS2300 010101 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. 1
ENGLISH (Original instructions) SPECIFICATIONS Model FS2200 FS2300 Self drilling screw 6 mm 6 mm Capacities Drywall screw 5 mm 5 mm -1 No load speed (min ) 0 - 2,500 0 - 2,500 Overall length 287 mm 290 mm Net weight 1.6 kg 1.6 kg Safety class /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. • Weight according to EPTA-Procedure 01/2003 END201-4 For Model FS2300 Symbols For European countries only ENG102-2 The following show the symbols used for the equipment. Noise Be sure that you understand their meaning before use. The typical A-weighted noise level determined according ? Read instruction manual. to EN60745: Sound pressure level (L pA) : 83 dB(A) ? DOUBLE INSULATION Sound power level (L WA) : 94 dB(A) Uncertainty (K) : 3 dB(A) ? Only for EU countries Wear ear protection Do not dispose of electric equipment ENG204-2 together with household waste material! Vibration In observance of European Directive The vibration total value (tri-axial vector sum) 2002/96/EC on waste electric and determined according to EN60745: electronic equipment and its Work mode: screwdriving without impact 2 implementation in accordance with Vibration emission (a h) : 2.5 m/s or less national law, electric equipment that Uncertainty (K) : 1.5 m/s 2 have reached the end of their life must ENG901-1 be collected separately and returned to • The declared vibration emission value has been an environmentally compatible measured in accordance with the standard test recycling facility. method and may be used for comparing one tool ENE033-1 with another. Intended use • The declared vibration emission value may also be The tool is intended for screw driving in wood, metal and used in a preliminary assessment of exposure. plastic. ENF002-1 WARNING: Power supply • The vibration emission during actual use of the The tool should be connected only to a power supply of power tool can differ from the declared emission the same voltage as indicated on the nameplate, and value depending on the ways in which the tool is can only be operated on single-phase AC supply. They used. are double-insulated in accordance with European • Be sure to identify safety measures to protect the Standard and can, therefore, also be used from sockets operator that are based on an estimation of without earth wire. exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). 2
ENH101-12 you to lose control. EC Declaration of Conformity Electrical safety We Makita Corporation as the responsible 4. Power tool plugs must match the outlet. Never manufacturer declare that the following Makita modify the plug in any way. Do not use any machine(s): adapter plugs with earthed (grounded) power Designation of Machine: tools. Unmodified plugs and matching outlets will Drywall Screwdriver reduce risk of electric shock. Model No./ Type: FS2300 5. Avoid body contact with earthed or grounded are of series production and surfaces such as pipes, radiators, ranges and Conforms to the following European Directives: refrigerators. There is an increased risk of 98/37/EC until 28th December 2009 and then with electric shock if your body is earthed or grounded. 2006/42/EC from 29th December 2009 6. Do not expose power tools to rain or wet And are manufactured in accordance with the following conditions. Water entering a power tool will standards or standardised documents: increase the risk of electric shock. EN60745 7. Do not abuse the cord. Never use the cord for The technical documentation is kept by our authorised carrying, pulling or unplugging the power tool. representative in Europe who is: Keep cord away from heat, oil, sharp edges or Makita International Europe Ltd, moving parts. Damaged or entangled cords Michigan, Drive, Tongwell, increase the risk of electric shock. Milton Keynes, MK15 8JD, England 8. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of 30th January 2009 a cord suitable for outdoor use reduces the risk of electric shock. 9. If operating a power tool in a damp location is 000230 unavoidable, use a residual current device Tomoyasu Kato (RCD) protected supply. Use of an RCD reduces Director the risk of electric shock. Makita Corporation 10. Use of power supply via a RCD with a rated 3-11-8, Sumiyoshi-cho, residual current of 30mA or less is always Anjo, Aichi, JAPAN recommended. Personal safety GEA005-3 11. Stay alert, watch what you are doing and use common sense when operating a power tool. General Power Tool Safety Do not use a power tool while you are tired or Warnings under the influence of drugs, alcohol or WARNING Read all safety warnings and all medication. A moment of inattention while instructions. Failure to follow the warnings and operating power tools may result in serious instructions may result in electric shock, fire and/or personal injury. serious injury. 12. Use personal protective equipment. Always wear eye protection. Protective equipment such Save all warnings and as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions instructions for future reference. will reduce personal injuries. The term "power tool" in the warnings refers to your 13. Prevent unintentional starting. Ensure the mains-operated (corded) power tool or battery-operated switch is in the off-position before connecting (cordless) power tool. to power source and/or battery pack, picking Work area safety up or carrying the tool. Carrying power tools 1. Keep work area clean and well lit. Cluttered or with your finger on the switch or energising power dark areas invite accidents. tools that have the switch on invites accidents. 2. Do not operate power tools in explosive 14. Remove any adjusting key or wrench before atmospheres, such as in the presence of turning the power tool on. A wrench or a key left flammable liquids, gases or dust. Power tools attached to a rotating part of the power tool may create sparks which may ignite the dust or fumes. result in personal injury. 3. Keep children and bystanders away while 15. Do not overreach. Keep proper footing and operating a power tool. Distractions can cause balance at all times. This enables better control 3