Дрель аккумуляторная MAKITA DDF453SYE LiION. Инструкция на русском языке

GB  Cordless Driver Drill              INSTRUCTION MANUAL
S  Sladdlos borrmaskin                BRUKSANVISNING
N  Batteridrevet boreskrutrekker      BRUKSANVISNING
FIN  Akkuporakone                      KAYTTOOHJE
LV  Bezvada skruvgriezis-urbmasina    LIETOSANAS    INSTRUKCIJA
LT  Akumuliatorinis graztas           NAUDOJIMO INSTRUKCIJA
EE  Juhtmeta trell-kruvikeeraja        KASUTUSJUHEND
RUS  Аккумуляторная Дрель-шуруповерт   РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
DDF343
DDF453
1

1
1
2
3
1                          012153   2                         012128
A                        B
1                                           1
3                          009077   4                         009078
1
1
2
3
5                          009079   6                         009080
1
7                          009081   8                         009082
2

ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator       3-1. Switch trigger      6-2. Graduation
1-2. Button              4-1. Reversing switch lever   6-3. Pointer
1-3. Battery cartridge   5-1. Speed change lever   7-1. Sleeve
2-1. Star marking        6-1. Adjusting ring
SPECIFICATIONS
Model                      DDF343            DDF453
Steel            10 mm             13 mm
Wood              25 mm             36 mm
Capacities
Wood screw       5.1 mm x 63 mm    6 mm x 75 mm
Machine screw                 6 mm
High (2)                   0 - 1,300
-1
No load speed (min )
Low (1)                    0 - 400
Overall length               192 mm            214 mm
Net weight                  1.4 kg             1.6 kg
Rated voltage               D.C. 14.4 V        D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE034-1                              ENG901-1
Intended use                          •   The declared vibration emission value has been
The tool is intended for drilling and screw driving in wood,   measured in accordance with the standard  test
metal and plastic.                       method and may be used for comparing one tool
ENG905-1   with another.
Noise                                 •   The declared vibration emission value may also be
The typical A-weighted noise level determined according   used in a preliminary assessment of exposure.
to EN60745:
Model DDF343                        WARNING:
•   The vibration emission during actual use of  the
Sound pressure level (L pA) : 70 dB (A) or less   power tool  can  differ from the declared emission
Uncertainty (K) : 3 dB (A)            value depending on the ways in which the tool is
The noise level under working may exceed 80 dB (A)   used.
•   Be sure to identify safety measures to protect the
Model DDF453                          operator that  are  based on an  estimation  of
Sound pressure level (L pA) : 72 dB (A)   exposure in the actual conditions of use (taking
Uncertainty (K) : 3 dB (A)            account of all parts of the operating cycle such as
The noise level under working may exceed 80 dB (A).   the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Wear ear protection
ENH101-17
ENG900-1   For European countries only
Vibration                            EC Declaration of Conformity
The vibration total value (tri-axial vector sum) determined   Makita declares that the following Machine(s):
according to EN60745:
Designation of Machine:
Work mode: drilling into metal    Cordless Driver Drill
2
Vibration emission (a h,D) : 2.5 m/s  or less   Model No./ Type: DDF343,DDF453
Uncertainty (K) : 1.5 m/s 2
3