Аккумуляторная сабельная пила MAKITA BJR 141 Z. Инструкция на русском языке

INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
Cordless Recipro Saw
Scie recipro sans fil
Sierra de sable inalambrico
BJR141
007383
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AVERTISSEMENT:
Pour votre propre securite, priere de lire attentivement avant l'utilisation.
GARDER CES INSTRUCTIONS POUR REFERENCE ULTERIEURE.
ADVERTENCIA:
Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la
herramienta.
GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.
1

ENGLISH
SPECIFICATIONS
Model                               BJR141
Length of stroke                     23 mm (7/8")
Strokes per minute                    0 - 2,700/min
Pipe                    90 mm  (3-1/2")
Max. cutting capacities
Wood                     90 mm  (3-1/2")
Overall length                     466 mm (18-3/8")
Net weight                         3.1 kg (6.8 lbs)
Rated voltage                        D.C. 14.4V
Standard battery cartridge               BL1430
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
GEA002-3   8.   When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
GENERAL SAFETY RULES                     a cord suitable for outdoor use reduces the risk of
WARNING! Read all instructions. Failure to follow all   electric shock.
instructions listed below may result in electric shock, fire   Personal Safety
and/or serious injury. The term "power tool" in all of the   9.   Stay alert, watch what you are doing and use
warnings listed below refers to your mains-operated   common sense when operating a power tool.
(corded) power tool or battery-operated (cordless) power   Do not use a power tool while you are tired or
tool.                                    under the  influence of drugs, alcohol or
medication.  A  moment of inattention while
SAVE THESE INSTRUCTIONS.                 operating power tools may result  in  serious
Work area safety                         personal injury.
1.   Keep work area clean and well lit. Cluttered and   10.  Use safety equipment.  Always  wear eye
dark areas invite accidents.         protection. Safety equipment such as dust mask,
2.   Do not operate power tools  in explosive   non-skid  safety shoes, hard hat,  or hearing
atmospheres, such as  in the presence of   protection  used  for appropriate conditions will
flammable liquids, gases or dust. Power tools   reduce personal injuries.
create sparks which may ignite the dust or fumes.   11.  Avoid accidental starting. Ensure the switch is
3.   Keep children and bystanders away  while   in the off-position before plugging in. Carrying
operating a power tool. Distractions can cause   power tools with  your finger on the switch or
you to lose control.                 plugging in power tools that have the switch on
Electrical Safety                        invites accidents.
4.   Power tool plugs must match the outlet. Never   12.  Remove any adjusting key or  wrench before
modify the plug in any  way. Do not use any   turning the power tool on. A wrench or a key left
adapter plugs with earthed (grounded) power   attached to a rotating part of the power tool may
tools. Unmodified plugs and matching outlets will   result in personal injury.
reduce risk of electric shock.    13.  Do not overreach. Keep proper footing and
5.   Avoid body contact with earthed or grounded   balance at all times. This enables better control
surfaces such as pipes, radiators, ranges and   of the power tool in unexpected situations.
refrigerators.  There is an increased risk of   14.  Dress properly. Do not wear loose clothing or
electric shock if your body is earthed or grounded.   jewellery. Keep your hair, clothing, and gloves
6.   Do not expose  power tools to rain or  wet   away from moving parts. Loose clothes,
conditions. Water  entering a  power tool  will   jewellery or long hair  can  be  caught in moving
increase the risk of electric shock.   parts.
7.   Do not abuse the cord. Never use the cord for   15.  If devices are provided for the connection of
carrying, pulling or unplugging the power tool.   dust extraction and collection facilities,
Keep cord away from heat, oil, sharp edges or   ensure these are connected and properly used.
moving parts. Damaged or  entangled  cords   Use of  these devices  can reduce  dust-related
increase the risk of electric shock.   hazards.
2

Power tool use and care               27.  Under abusive  conditions, liquid may be
16.  Do not force the power tool. Use the correct   ejected from the battery, avoid contact. If
power tool for  your application. The  correct   contact accidentally occurs, flush with water. If
power tool will do the job better and safer at the   liquid contacts eyes, additionally seek medical
rate for which it was designed.      help. Liquid ejected from the battery may cause
17.  Do not use the power tool if the switch does   irritation or burns.
not turn it on and off. Any power tool that cannot   SERVICE
be controlled  with the switch  is dangerous  and   28.  Have your power tool serviced by a qualified
must be repaired.                    repair person using only identical replacement
18.  Disconnect the plug from the power source   parts. This will ensure that the safety of the power
and/or the battery  pack  from the  power tool   tool is maintained.
before making any adjustments, changing   29.  Follow  instruction  for  lubricating  and
accessories, or  storing power  tools. Such   changing accessories.
preventive safety measures reduce  the risk of   30.  Keep handles dry, clean and free from oil and
starting the power tool accidentally.   grease.
19.  Store idle power tools out of the  reach of                    GEB008-2
children and do not allow persons unfamiliar
with the power  tool or these instructions to   SPECIFIC SAFETY RULES
operate the power  tool.  Power tools are   DO NOT let comfort or familiarity  with product
dangerous in the hands of untrained users.   (gained from repeated use) replace strict adherence
20.  Maintain power tools. Check for misalignment   to recipro saw  safety rules.  If  you use this tool
or binding of moving parts, breakage of parts   unsafely or incorrectly,  you can suffer serious
and any  other condition that  may  affect the   personal injury.
power tools operation. If damaged, have the   1.   Hold power tools by insulated gripping
power tool repaired before use. Many accidents   surfaces when performing an operation where
are caused by poorly maintained power tools.   the cutting tool may contact hidden wiring or
21.  Keep cutting tools  sharp and clean. Properly   its own cord. Contact with a "live" wire will make
maintained cutting tools with sharp cutting edges   exposed metal parts of the tool "live" and shock
are less likely to bind and are easier to control.   the operator.
22.  Use the power tool, accessories and tool bits   2.   Use clamps or another practical way to secure
etc. in accordance with these instructions and   and support the workpiece to a stable platform.
in the manner intended for the particular type   Holding the work  by hand or against your body
of power tool, taking into account the working   leaves it unstable and may lead to loss of control.
conditions and the work to be performed. Use   3.   Always use safety glasses or goggles.
of the power tool  for operations different from   Ordinary eye  or sun glasses are  NOT safety
those intended could result in a hazardous   glasses.
situation.                        4.   Avoid cutting nails. Inspect workpiece for any
Battery tool use and care                nails and remove them before operation.
23.  Ensure the switch is in the off position before   5.   Do not cut oversize workpiece.
inserting battery pack. Inserting the battery pack   6.   Check for the proper clearance beyond the
into power tools  that have the  switch on invites   workpiece before cutting so that the blade will
accidents.                           not strike the floor, workbench, etc.
24.  Recharge only  with the  charger specified by   7.   Hold the tool firmly.
the manufacturer. A charger that is suitable for   8.   Make sure the blade is not contacting the
one type of battery pack may create a risk of fire   workpiece before the switch is turned on.
when used with another battery pack.   9.   Keep hands away from moving parts.
25.  Use power tools only  with specifically   10.  Do not leave the tool running. Operate the tool
designated battery  packs. Use of any other   only when hand-held.
battery packs may create a risk of injury and fire.   11.  Always switch off and  wait  for the blade to
26.  When battery pack is not in use, keep it away   come to a complete stop before removing the
from other metal objects like paper clips, coins,   blade from the workpiece.
keys, nails, screws, or other  small metal   12.  Do not touch the blade or the  workpiece
objects that can make a connection from one   immediately after operation; they may be
terminal to another. Shorting the battery   extremely hot and could burn your skin.
terminals together may cause burns or a fire.   13.  Do  not  operate  the  tool  at  no-load
3