Дрель MAKITA 6501. Инструкция на русском языке

GB  High Speed Drill                   INSTRUCTION MANUAL
UA  Високошвидкісний дриль             ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ
PL  Wiertarka wysokoobrotowa           INSTRUKCJA OBSLUGI
RO  Masina de gaurit de mare viteza    MANUAL DE INSTRUCTIUNI
DE  Hochgeschwindigkeits-Bohrmaschine  BEDIENUNGSANLEITUNG
HU  Nagysebessegu furogep              HASZNALATI KEZIKONYV
SK  Vysokootackova vrtacka             NAVOD   NA  OBSLUHU
CZ  Vysokootackova vrtacka             NAVOD   K OBSLUZE
6501
1

2
1                                         1
2
1                          003016   2                         004638
1
2
3
3                          003058
2

ENGLISH (Original instructions)
Explanation of general view
1-1. Switch trigger      2-2. Chuck key           3-3. Clamp screw
1-2. Lock button         3-1. Depth gauge
2-1. Tighten             3-2. Washer
SPECIFICATIONS
Model                                6501
Steel                     6.5 mm
Capacities
Wood                        9 mm
-1
No load speed (min )                     4,500
Overall length                        206 mm
Net weight                            0.9 kg
Safety class                           /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE032-1   •   Be sure to identify safety measures to protect the
Intended use                             operator that  are  based on an  estimation  of
The tool is intended for drilling in wood, metal and plastic.   exposure in the actual conditions of use (taking
ENF002-1
Power supply                             account of all parts of the operating cycle such as
The tool should be connected only to a power supply of   the times when the tool is switched off and when it
the same voltage as indicated on the nameplate, and can   is running idle in addition to the trigger time).
only be operated on single-phase AC supply. They are               ENH101-14
double-insulated in accordance with European Standard   For European countries only
and can, therefore, also be used from sockets without
earth wire.                          EC Declaration of Conformity
ENG104-2   We  Makita  Corporation  as  the  responsible
Noise                                manufacturer declare that the following  Makita
The typical A-weighted noise level determined according   machine(s):
to EN60745:                          Designation of Machine:
Sound pressure level (L pA) : 77 dB(A)   High Speed Drill
Uncertainty (K) : 3 dB(A)         Model No./ Type: 6501
The noise level under working may exceed 80 dB (A).   are of series production and
Wear ear protection.       Conforms to the following European Directives:
ENG202-3   2006/42/EC
Vibration                            And are manufactured in accordance with the following
The vibration total value (tri-axial vector sum) determined   standards or standardised documents:
according to EN60745:                    EN60745
Work mode: drilling into metal    The technical documentation is kept by our authorised
2
Vibration emission (a h,D) : 2.5 m/s  or less   representative in Europe who is:
Uncertainty (K) : 1.5 m/s 2
ENG901-1   Makita International Europe Ltd,
•   The declared vibration emission value has been   Michigan, Drive, Tongwell,
measured in accordance with the standard  test   Milton Keynes, MK15 8JD, England
method and may be used for comparing one tool
with another.                                 30th January 2009
•   The declared vibration emission value may also be
used in a preliminary assessment of exposure.
000230
WARNING:                                         Tomoyasu Kato
•   The vibration emission during actual use of  the   Director
power tool  can  differ from the declared emission   Makita Corporation
value depending on the ways in which the tool is   3-11-8, Sumiyoshi-cho,
used.
3