Трансформатор LUNDAHL LL1620AM 40 mA. Инструкция на английском языке

Tibeliusgatan 7                        International   Domestic
LUNDAHL                        S-761 50 NORRTALJE         Phone    +46 - 176 13930   0176-13930
TRANSFORMERS                SWEDEN                     Fax      +46 - 176 13935   0176-13935
Amorphous core output transformers
LL1620AM, LL1623AM, LL1627AM, LL1679AM, LL9202AM
Some of our tube output transformers are now available with amorphous core.
Listening tests, in particular for the PP versions where the core airgap is not as
dominating as in SE applications, have reported a more transparent, wider bandwidth
character than our silicon iron counterparts.
For connection alternatives and general application information, please refer to data
sheets for our regular (silicon-iron) output transformers.
The obvious measurable difference between our silicon-iron cores and amorphous
cores is that the saturation flux for the amorphous core is approximately 33% less than
for the silicon-iron counterpart. This is caused partly by a lower saturating flux level,
partly by a smaller fill-factor due to the thickness of the amorphous sheets.
As a result, power bandwidth is reduced with about 50%. (This means that if the max
output power for a standard LL1620/40mA is 25W at 30 Hz, corresponding max.
power for LL1620AM/40mA is 13W.)
This is probably not a problem in most Push-Pull applications, but should possibly be
considered in Single End amplifiers.
R041022