Штроборез FELISATTI SD230/2600E. Инструкция на русском языке

SD230/2200
SD230/2600E
WALL CHASER
ROZADORA
RAINUREUSE FRAISEUSE
FRESATRICE PER MURATURA
MAUERNUTFRASE
БОРОЗДОДЕЛ

1
5    6      7     8    9
1
4    3  2
2
11                       10
12               10    10    13       10
2

Original Instructions
GENERAL SAFETY RULES        jewellery. Keep your hair, clothing and gloves away
WARNING!  Read all instructions. Failure to   from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
follow all instructions listed below may result in      g) If devices are provided for the connection of
electric shock, fire and/or serious injury. The term   dust extraction and collection facilities, ensure these
“power tool” in all of the warnings listed below refers to your   are connected and properly used. Use of these devices
mains  operated  (corded)  power tool  or battery operated   can reduce dust related hazards.
(cordless) power tool.                 4) Power tool use and care
SAVE THESE INSTRUCTIONS             a) Do not force the power tool. Use the correct
1) Work area                     power tool for your application. The correct power tool
a) Keep work area clean and well lit. Cluttered and   will do the job better and safer at the rate for which it was
dark areas invite accidents.        designed.
b) Do not operate power tools in explosive      b) Do not use the power tool if the switch does not
atmospheres,  such  as  in  the  presence  of  flammable   turn it on and off. Any power tool that cannot be controlled
liquids, gases or dust. Power tools create sparks which   with the switch is dangerous and must be repaired.
may ignite the dust or fumes.          c) Disconnect  the plug from the power source
c) Keep children and bystanders away while   before making any adjustments, changing accessories,
operating a power tool.  Distractions  can cause you to   or storing power tools. Such preventive safety measures
lose control.                       reduce the risk of starting the power tool accidentally.
2) Electrical safety                d)  Store  idle power  tools  out  of  the  reach of
a) Power tool plugs must match the outlet. Never   children and do not allow persons unfamiliar with the
modify the plug in any way. Do not use any adapter plugs   power tool or these instructions to operate the power
with earthed (grounded) power tools. Unmodified plugs and   tool. Power tools are dangerous in the hands of untrained
matching outlets will reduce risk of electric shock.  users.
b) Avoid body contact with earthed or grounded      e) Maintain power tools. Check for misalignment
surfaces such as pipes, radiators, ranges and   or  binding of moving parts, breakage of  parts  and
refrigerators. There is an increased risk of electric shock if   any other condition that may affect the power tools
your body is earthed or grounded.   operation. If damaged, have the power tool repaired before
c) Do  not  expose power tools to  rain  or  wet   use.  Many  accidents  are  caused  by  poorly  maintained
conditions. Water entering a power tool will increase the   power tools.
risk of electric shock.                f) Keep cutting tools sharp and clean. Properly
d) Do not abuse the cord. Never use the cord for   maintained cutting tools with sharp cutting edges are less
carrying, pulling or unplugging the power tool. Keep   likely to bind and are easier to control.
cord  away  from  heat,  oil,  sharp  edges  or  moving  parts.      g) Use the power tool, accessories and tool bits
Damaged or entangled cords increase the risk of electric   etc., in accordance with these instructions and in
shock.                              the manner intended for the particular type of power
e) When operating a power tool outdoors, use an   tool, taking into account the working conditions
extension cord suitable for outdoor use. Use of a cord   and the work to be performed. Use of the power tool
suitable for outdoor use reduces the risk of electric shock.  for  operations different  from intended could result in a
f) If operating a power tool in a damp location   hazardous situation.
is unavoidable, use a residual current device (RCD)      5) Service
protected supply.  Use  of  an  RCD  reduces  the  risk  of      a) Have your power tool serviced by a qualified
electric shock.                     repair person using only identical replacement
3) Personal safety               parts. This will ensure that the safety of the power tool is
a) Stay alert, watch what you are doing and use   maintained.
common sense when operating a power tool. Do not   WARNING!  Read  all  safety  warnings  and  all
use a power tool while you are tired  or  under  the   instructions, given in the Operating Instructions.
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in   SPECIFIC SAFETY AND WARNINGS
serious personal injury.
b) Use safety equipment.  Always wear eye      Always  use  guard  provided  with  the  tool.  The
protection.  Safety equipment such as dust mask, non-  guard must be securely attached  to the power tool and
skid safety shoes, hard hat, or hearing protection used for   positioned  for maximum safety, so the least amount of
appropriate conditions will reduce personal injuries.  wheel is exposed towards the operator. Position yourself
c) Avoid accidental starting. Ensure the switch is   and bystanders away from the plane of the rotating wheel.
in the off position before plugging in. Carrying power tools   The  guard  helps  to  protect  operator  from  broken  wheel
with your finger on the switch or plugging in power tools   fragments and accidental contact with wheel.
that have the switch on invites accidents.
d)  Remove any adjusting  key or  wrench before      Use only diamond cut-off wheels for your power tool.
turning the power tool on. A wrench or a key left attached   Just because an accessory can be attached to your power
to a rotating part of the power tool may result in personal   tool, it does not assure safe operation.
injury.                                The rated speed of the accessory must be at least
e) Do not overreach. Keep  proper  footing and   equal to the maximum speed marked on the power tool.
balance at all times. This enables better control of the   Accessories  running faster than their rated speed can
power tool in unexpected situations.  break and fly apart.
f) Dress properly. Do not wear loose clothing or      Wheels must be used only for recommended
4