Дисковая пила FELISATTI SCF184/1400. Инструкция на русском языке

SCF184/1400
CIRCULAR SAW
SIERRA CIRCULAR
SCIE CIRCULAIRE
SEGA CIRCOLARE
HANDKREISSAGE
ПИЛА ДИСКОВАЯ

Fig. 1
L
D
C
N
H
M    E                                    B
Fig. 2     A                                      I
F
Fig. 3
O
J
K
G
2

Original Instructions
GENERAL SAFETY RULES        turning the power tool on. A wrench or a key left attached
WARNING!  Read all instructions. Failure to   to a rotating part of the power tool may result in personal
injury.
follow all instructions listed below may result in      e) Do not overreach. Keep  proper  footing and
electric shock, fire and/or serious injury. The term   balance at all times. This enables better control of the
“power tool” in all of the warnings listed below refers to your   power tool in unexpected situations.
mains  operated  (corded)  power tool  or battery operated      f) Dress properly. Do not wear loose clothing or
(cordless) power tool.              jewellery. Keep your hair, clothing and gloves away
SAVE THESE INSTRUCTIONS          from moving parts. Loose clothes, jewellery or long hair
1) Work area                     can be caught in moving parts.
a) Keep work area clean and well lit. Cluttered and      g) If devices are provided for the connection of
dark areas invite accidents.        dust extraction and collection facilities, ensure these
b) Do not operate power tools in explosive   are connected and properly used. Use of these devices
atmospheres,  such  as  in  the  presence  of  flammable   can reduce dust related hazards.
liquids, gases or dust. Power tools create sparks which      4) Power tool use and care
may ignite the dust or fumes.          a) Do not force the power tool. Use the correct
c) Keep children and bystanders away while   power tool for your application. The correct power tool
operating a power tool.  Distractions  can cause you to   will do the job better and safer at the rate for which it was
lose control.                       designed.
2) Electrical safety                b) Do not use the power tool if the switch does not
a) Power tool plugs must match the outlet. Never   turn it on and off. Any power tool that cannot be controlled
modify the plug in any way. Do not use any adapter plugs   with the switch is dangerous and must be repaired.
with earthed (grounded) power tools. Unmodified plugs and      c) Disconnect  the plug from the power source
matching outlets will reduce risk of electric shock.  before making any adjustments, changing accessories,
b) Avoid body contact with earthed or grounded   or storing power tools. Such preventive safety measures
surfaces such as pipes, radiators, ranges and   reduce the risk of starting the power tool accidentally.
refrigerators. There is an increased risk of electric shock if      d)  Store  idle power  tools  out  of  the  reach of
your body is earthed or grounded.   children and do not allow persons unfamiliar with the
c) Do  not  expose power tools to  rain  or  wet   power tool or these instructions to operate the power
conditions. Water entering a power tool will increase the   tool. Power tools are dangerous in the hands of untrained
risk of electric shock.             users.
d) Do not abuse the cord. Never use the cord for      e) Maintain power tools. Check for misalignment
carrying, pulling or unplugging the power tool. Keep   or  binding of moving parts, breakage of  parts  and
cord  away  from  heat,  oil,  sharp  edges  or  moving  parts.   any other condition that may affect the power tools
Damaged or entangled cords increase the risk of electric   operation. If damaged, have the power tool repaired before
shock.                              use.  Many  accidents  are  caused  by  poorly  maintained
e) When operating a power tool outdoors, use an   power tools.
extension cord suitable for outdoor use. Use of a cord      f) Keep cutting tools sharp and clean. Properly
suitable for outdoor use reduces the risk of electric shock.  maintained cutting tools with sharp cutting edges are less
f) If operating a power tool in a damp location   likely to bind and are easier to control.
is unavoidable, use a residual current device (RCD)      g) Use the power tool, accessories and tool bits
protected supply.  Use  of  an  RCD  reduces  the  risk  of   etc., in accordance with these instructions and in
electric shock.                     the manner intended for the particular type of power
3) Personal safety               tool, taking into account the working conditions
a) Stay alert, watch what you are doing and use   and the work to be performed. Use of the power tool
common sense when operating a power tool. Do not   for  operations different  from intended could result in a
use a power tool while you are tired  or  under  the   hazardous situation.
influence of drugs, alcohol or medication. A moment      5) Service
of inattention while operating power tools may result in      a) Have your power tool serviced by a qualified
serious personal injury.            repair person using only identical replacement
b) Use safety equipment.  Always wear eye   parts. This will ensure that the safety of the power tool is
protection.  Safety equipment such as dust mask, non-  maintained.
skid safety shoes, hard hat, or hearing protection used for   WARNING!  Read  all  safety  warnings  and  all
appropriate conditions will reduce personal injuries.  instructions, given in the Operating Instructions.
c) Avoid accidental starting. Ensure the switch is
in the off position before plugging in. Carrying power tools   SPECIFIC SAFETY AND WARNINGS
with your finger on the switch or plugging in power tools      DANGER! Keep hands away from cutting area and
that have the switch on invites accidents.  the  blade.  Keep  your  second  hand  on  auxiliary  handle,
d)  Remove any adjusting  key or  wrench before
3