Дрель электрическая FELISATTI D16/850GE. Инструкция на русском языке

D13/700GE
D16/850GE
DI16/850GE2
DRILL
TALADRADORA
PERCEUSE
TRAPANO
BOHRMASCHINE
МАШИНА РУЧНАЯ ЭЛЕКТРИЧЕСКАЯ
СВЕРЛИЛЬНАЯ

Fig. 1                  B   C  D
I
K
H      F
J            E
Fig. 2                  B  C D          A
I
K
H      G   F   J
E
Fig. 3                                 C
B
2

Original Instructions
GENERAL SAFETY RULES        jewellery. Keep your hair, clothing and gloves away
WARNING!  Read all instructions. Failure to   from moving parts. Loose clothes, jewellery or long hair
follow all instructions listed below may result in   can be caught in moving parts.
electric shock, fire and/or serious injury. The term      g) If devices are provided for the connection of
“power tool” in all of the warnings listed below refers to your   dust extraction and collection facilities, ensure these
mains  operated  (corded)  power tool  or battery operated   are connected and properly used. Use of these devices
(cordless) power tool.              can reduce dust related hazards.
SAVE THESE INSTRUCTIONS             4) Power tool use and care
1) Work area                        a) Do not force the power tool. Use the correct
a) Keep work area clean and well lit. Cluttered and   power tool for your application. The correct power tool
dark areas invite accidents.        will do the job better and safer at the rate for which it was
b) Do not operate power tools in explosive   designed.
atmospheres,  such  as  in  the  presence  of  flammable      b) Do not use the power tool if the switch does not
liquids, gases or dust. Power tools create sparks which   turn it on and off. Any power tool that cannot be controlled
may ignite the dust or fumes.       with the switch is dangerous and must be repaired.
c) Keep children and bystanders away while      c) Disconnect  the plug from the power source
operating a power tool.  Distractions  can cause you to   before making any adjustments, changing accessories,
lose control.                       or storing power tools. Such preventive safety measures
2) Electrical safety             reduce the risk of starting the power tool accidentally.
a) Power tool plugs must match the outlet. Never      d)  Store  idle power  tools  out  of  the  reach of
modify the plug in any way. Do not use any adapter plugs   children and do not allow persons unfamiliar with the
with earthed (grounded) power tools. Unmodified plugs and   power tool or these instructions to operate the power
matching outlets will reduce risk of electric shock.  tool. Power tools are dangerous in the hands of untrained
b) Avoid body contact with earthed or grounded   users.
surfaces such as pipes, radiators, ranges and      e) Maintain power tools. Check for misalignment
refrigerators. There is an increased risk of electric shock if   or  binding of moving parts, breakage of  parts  and
your body is earthed or grounded.   any other condition that may affect the power tools
c) Do  not  expose power tools to  rain  or  wet   operation. If damaged, have the power tool repaired before
conditions. Water entering a power tool will increase the   use.  Many  accidents  are  caused  by  poorly  maintained
risk of electric shock.             power tools.
d) Do not abuse the cord. Never use the cord for      f) Keep cutting tools sharp and clean. Properly
carrying, pulling or unplugging the power tool. Keep   maintained cutting tools with sharp cutting edges are less
cord  away  from  heat,  oil,  sharp  edges  or  moving  parts.   likely to bind and are easier to control.
Damaged or entangled cords increase the risk of electric      g) Use the power tool, accessories and tool bits
shock.                              etc., in accordance with these instructions and in
e) When operating a power tool outdoors, use an   the manner intended for the particular type of power
extension cord suitable for outdoor use. Use of a cord   tool, taking into account the working conditions
suitable for outdoor use reduces the risk of electric shock.  and the work to be performed. Use of the power tool
f) If operating a power tool in a damp location   for  operations different  from intended could result in a
is unavoidable, use a residual current device (RCD)   hazardous situation.
protected supply.  Use  of  an  RCD  reduces  the  risk  of      5) Service
electric shock.                        a) Have your power tool serviced by a qualified
3) Personal safety               repair person using only identical replacement
a) Stay alert, watch what you are doing and use   parts. This will ensure that the safety of the power tool is
common sense when operating a power tool. Do not   maintained.
use a power tool while you are tired  or  under  the   WARNING!  Read  all  safety  warnings  and  all
influence of drugs, alcohol or medication. A moment   instructions, given in the Operating Instructions.
of inattention while operating power tools may result in   SPECIFIC SAFETY AND WARNINGS
serious personal injury.
b) Use safety equipment.  Always wear eye      Hold power tool by insulated gripping surfaces, when
protection.  Safety equipment such as dust mask, non-  performing an operation where the cutting accessory may
skid safety shoes, hard hat, or hearing protection used for   contact hidden wiring or its own cord. Cutting accessory
appropriate conditions will reduce personal injuries.  contacting a “live” wire may make exposed metal parts of
c) Avoid accidental starting. Ensure the switch is   the power tool “live” and could give the operator an electric
in the off position before plugging in. Carrying power tools   shock.
with your finger on the switch or plugging in power tools      Use auxiliary handle, if supplied with the tool. Loss of
that have the switch on invites accidents.  control can cause personal injury.
d)  Remove any adjusting  key or  wrench before      Use  appropriate  detectors  to  determine  if  utility
turning the power tool on. A wrench or a key left attached   lines are hidden in the work area or call the local utility
to a rotating part of the power tool may result in personal   company  for  assistance.  Contact  with  electric  lines  can
injury.                             lead to fire and electric shock. Damaging a gas line can
e) Do not overreach. Keep  proper  footing and   lead to explosion. Penetrating a water line causes property
balance at all times. This enables better control of the   damage or may cause an electric shock.
power tool in unexpected situations.     Switch off the power tool immediately when the tool
f) Dress properly. Do not wear loose clothing or   insert jams. Be prepared for high reaction torque that can
3