Рубанок электрический DEFORT DEP-900-R. Инструкция на русском языке

DEP-900-R
98290776
User’s Manual  . . . . . . . . . . . . . . . . .  4  Instruksja obslugi  . . . . . . . . . . . . . .  18
GB                                 PL
DE  Bedienungsanleitung  . . . . . . . . . . . .  5  CZ  Navod k pouziti. . . . . . . . . . . . . . . .  19
FR  Mode d’emploi  . . . . . . . . . . . . . . . . .  6  SI  Navodilo za uporabo. . . . . . . . . . . .  20
ES  Instrucciones de servicio  . . . . . . . . .  7  CS  Uputstvo za korisnike . . . . . . . . . .  21
PT  Manual de instrucoes . . . . . . . . . . . .  8  HR    BOS  Upute za uporabu . . . . . . . .  22
IT  Istruzione per l’uso  . . . . . . . . . . . . .  9  TR  Kullan?m k?lavuzu . . . . . . . . . . . . . .  23
NL  Gebruiksaanwijzing  . . . . . . . . . . . .  10  AE   . . . . . . . . . . . . . .  24
SE  Bruksanvisning  . . . . . . . . . . . . . . . .11  RU  Инструкция по эксплуатации . . . .  25
FI  Kayttoohje. . . . . . . . . . . . . . . . . . . .  12  UA  Інструкція з експлуатації. . . . . . . .  26
NO  Bruksanvisning . . . . . . . . . . . . . . . .  13  KZ  ?олданысы бойынша н?с?ама. .  27
DK  Brugervejledning. . . . . . . . . . . . . . .  14  LT  Instrukcija  . . . . . . . . . . . . . . . . . . .  28
HU  Hasznalati utasitas   . . . . . . . . . . . .  15  LV  Instrukcija  . . . . . . . . . . . . . . . . . . .  29
RO  Manual de utilizare  . . . . . . . . . . . .  16  EE  Kasutusjuhend  . . . . . . . . . . . . . . .  30
GR  ??????? ??????? . . . . . . . . . . . . . .  17

230 V   800 W    16000     0-3.0   82 mm     0-15    2.9 kg
50 Hz                                        mm

English                        •  Always check that the supply voltage is the same as
the voltage indicated on the nameplate of the tool (tools
with a rating of 230V or 240V can also be connected to
a 220V supply)
•  If any chip should get jammed in the chip outlet, you
Planer                                should switch off the motor, ensure that all moving parts
have come to a complete standstill, disconnect the
INTENDED USE                          plug, and remove the jammed chip
This tool is intended for planing wooden materials such   •  Before using the tool check that the knives do not
as beams and boards; it is also suitable for chamfering   brush anywhere
edges and rebating                    • Keep your ? ngers away from the rotating knives
•  Always disconnect plug from power source before
TECHNICAL SPECIFICATIONS   1          making any adjustment or changing any accessory
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ON-
PRODUCT ELEMENTS   2                  LY):
•  Do not connect the blue (= neutral) or brown (= live)
1. Safety switch                      wire in the cord of this tool to the earth terminal of the
2. On/off switch                      plug
3. Knob for setting planing depth     •  If for any reason the old plug is cut off the cord of
4. Planing depth indicator            this tool, it must be disposed of safely and not left unat-
5. Dust port                          tended
SAFETY                                      Your machine is double insulated in accordance
WARNING! Read all instructions. Failure to follow all in-  with EN 50144; therefore no earthwire is re-
structions listed below may result in electric shock, ? re   quired.
and/or serious injury.
MAINTENANCE
•  Avoid damage that can be caused by screws, nails
and other elements in your workpiece; remove them   Make sure that the machine is not live when car-
before you start working                    rying out maintenance work on the motor.
•  Always keep the cord away from moving parts of the
tool; direct the cord to the rear away from the tool  Regularly clean the machine housing with a soft cloth,
•  Wait for the cutter block to stop before setting   preferably after each use. Keep the ventilation slots free
the tool down (an exposed knife may engage the   from dust and dirt.If the dirt does not come off use a soft
surface leading to possible loss of control and seri-  cloth moistened with soapy water. Never use solvents
ous injury)                           such as petrol, alcohol, ammonia water, etc. These sol-
•  Use completely unrolled and safe extension cords   vents may damage the plastic parts.
with a capacity of 16 Amps (UK 13 Amps)  The machine requires no additional lubrication.
•  In case of electrical or mechanical malfunction, im-  Should a fault occur, e.g. after wear of a part, please
mediately switch off the tool and disconnect the plug  contact your local SBM Group dealer.
•  SBM Group can assure ? awless functioning of the
tool only when original accessories are used  ENVIRONMENT
•  This tool should not be used by people under the   In order to prevent the machine from damage during
age of 16 years                       transport, it is delivered in a sturdy packaging. Most of
•  The noise level when working can exceed 85 dB(A);   the packaging materials can be recycled. Take these
wear ear protection                   materials to the appropriate recycling locations.  Take
•  Wear a dust protection mask when working with ma-  your unwanted machines to your local SBM Group
terials which produce dust that is detrimental to health;   dealer. Here they will be disposed of in an environmen-
inform yourself beforehand about the materials to be   tally safe way.
worked on
•  If the cord is damaged or cut through while working,
do not touch the cord, but immediately disconnect the
plug
•  Never use tool when cord is damaged; have it re-
placed by a quali? ed person
4