Дрель-шуруповерт аккумуляторная DEFORT DCD-18Nx2DF. Инструкция на русском языке

DCD-18Nx2DF
98299298
GB  User’s Manual  . . . . . . . . . . . . . . . . .  6  PL  Instruksja obslugi  . . . . . . . . . . . . . .  20
DE  Bedienungsanleitung  . . . . . . . . . . . .  7  CZ  Navod k pouziti. . . . . . . . . . . . . . . .  21
FR  Mode d’emploi  . . . . . . . . . . . . . . . . .  8  SI  Navodilo za uporabo. . . . . . . . . . . .  22
ES  Instrucciones de servicio  . . . . . . . . .  9  CS  Uputstvo za korisnike . . . . . . . . . .  23
PT  Manual de instrucoes . . . . . . . . . . .  10  HR            Upute za uporabu . . . . . . . .  24
BOS
IT  Istruzione per l’uso  . . . . . . . . . . . . .11  TR  Kullan?m k?lavuzu . . . . . . . . . . . . . .  25
NL  Gebruiksaanwijzing  . . . . . . . . . . . .  12  AE     . . . . . . . . . . . . . .  26
SE  Bruksanvisning  . . . . . . . . . . . . . . .  13  RU  Инструкция по эксплуатации . . . .  27
FI  Kayttoohje. . . . . . . . . . . . . . . . . . . .  14  UA  Інструкція з експлуатації. . . . . . . .  28
NO  Bruksanvisning . . . . . . . . . . . . . . . .  15  KZ  ?олданысы бойынша н?с?ама. .  29
DK  Brugervejledning. . . . . . . . . . . . . . .  16  LT  Instrukcija  . . . . . . . . . . . . . . . . . . .  30
HU  Hasznalati utasitas   . . . . . . . . . . . .  17  LV  Instrukcija  . . . . . . . . . . . . . . . . . . .  31
RO  Manual de utilizare  . . . . . . . . . . . .  18  EE  Kasutusjuhend  . . . . . . . . . . . . . . .  32
GR  ??????? ??????? . . . . . . . . . . . . . .  19  SR  Упутство за употребу  . . . . . . . . . .  33

18 V  0-350/  10  22   20   25   10   1 h  1,35 kg
1,2 Ah 0-1300  mm  Nm       mm    mm
-1
min
5
3

English                        -  if liquid comes into contact with the skin, wash quickly with
soap and water, then with lemon juice or vinegar
-  if liquid gets into the eyes, ? ush eyes with clean water for
a minimum of 10 minutes and seek immediately medical
Cordless drill/driver                  attention
•  When battery is not in tool or charger, it should be kept away
INTENDED USE                          from metal objects such as nails, screws, keys etc. to prevent
•  This tool is intended for drilling in wood, metal, ceramic and   short-circuit
plastic; tools with electronic speed control and left/right rotation   •  Do not use charger when damaged; take it to one of the
are also suitable for screwdriving and thread cutting  of? cially registered SBM Group Service Stations for a safety
check
TECHNICAL SPECIFICATIONS  1          •  Do not use battery when damaged; it should be replaced
immediately
•  Do not disassemble charger or battery
PRODUCT ELEMENTS   2                 •  Do not attempt to recharge non-rechargeable batteries with the
charger
1 Switch for on/off and speed control  WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
2 Switch for changing direction of rotation  •  Do not connect the blue (= neutral) or brown (= live) wire in the
cord of the charger to the earth terminal of the plug
3 Keyless chuck                      •  If for any reason the old plug is cut off the cord of the charger,
4 Ring for torque control             it must be disposed of safely and not left unattended
5 Switch for selecting mechanical speed
To ensure longer service life and proper performance
SAFETY                                     of the battery, take the following actions when you
WARNING!  Read all instructions. Failure to follow all instructions   start using new battery:
listed below may result in electric shock, ? re and/or serious injury.
1. Use the new battery, without recharging it, till its complete
•  Ensure the switch is in the off position before inserting battery   discharge.
pack. Inserting the battery pack into power tools that have the   2. Then charge the battery for 3-5 hours.
switch on invites accidents.        3. Repeat abovementioned actions (1 and 2) 3-5 times to reach
•  Recharge only with the charger speci? ed by the manufacturer.   the nominal battery capacity.
A charger that is suitable for one type of battery pack may
create a risk of ? re when used with another battery pack.
•  Use power tools only with speci? cally designated battery   MAINTENANCE
packs. Use of any other battery packs may create a risk of   Make sure that the machine is not live when carry-
injury and ? re.                           ing out maintenance work on the motor.
•  Avoid damage that can be caused by screws, nails and other
elements in your workpiece; remove them before you start
working                             Regularly clean the machine housing with a soft cloth, preferably
•  Always check that the supply voltage is the same as the   after each use. Keep the ventilation slots free from dust and dirt.
voltage indicated on the nameplate of the charger (chargers   If the dirt does not come off use a soft cloth moistened with soapy
with a rating of 230V or 240V can also be connected to a 220V   water. Never use solvents such as petrol, alcohol, ammonia wa-
supply)                             ter, etc. These solvents may damage the plastic parts.
•  In case of electrical or mechanical malfunction, immediately   The machine requires no additional lubrication.
switch off the tool or unplug charger from power source  Should a fault occur, e.g. after wear of a part, please contact your
•  SBM Group can assure ? awless functioning of the tool only   local SBM Group dealer.
when original accessories are used
•  Use only accessories with an allowable speed matching at
least the highest no-load speed of the tool  ENVIRONMENT
•  This tool should not be used by people under the age of 16   In order to prevent the machine from damage during transport,
years                               it is delivered in a sturdy packaging. Most of the packaging ma-
•  Be careful not to drill or drive into areas where electrical wires   terials can be recycled. Take these materials to the appropriate
may be contacted                    recycling locations. Take your unwanted machines to your local
•  Ensure that switch (2) is in the middle (locking) position before   SBM Group dealer. Here they will be disposed of in an environ-
making any adjustments or changing accessories as well as   mentally safe way.
when carrying or storing the tool   NiCd batteries can be recycled. Deliver them to a disposal site for
•  Do not touch the contacts in the charger  chemical waste so that they can be recycled or disposed of in an
•  Do not expose tool/charger/battery to rain  environmentally friendly manner.
•  Never charge battery outdoors
•  Store tool/charger/battery in locations where temperature will
not exceed 40° C or drop below 0° C
•  Batteries will explode in  ? re, so do not burn battery for any
reason
•  When damaged, and under extreme usage and temperature
conditions, batteries may start to leak
6