Дрель-шуруповерт аккумуляторная DEFORT DCD-14N-DZK. Инструкция на русском языке

DCD-14N-DZK
98299908
GB  User’s Manual  . . . . . . . . . . . . . . . . .  6  PL  Instruksja obslugi  . . . . . . . . . . . . . .  20
DE  Bedienungsanleitung  . . . . . . . . . . . .  7  CZ  Navod k pouziti. . . . . . . . . . . . . . . .  21
FR  Mode d’emploi  . . . . . . . . . . . . . . . . .  8  SI  Navodilo za uporabo. . . . . . . . . . . .  22
ES  Instrucciones de servicio  . . . . . . . . .  9  CS  Uputstvo za korisnike . . . . . . . . . .  23
BOS
PT  Manual de instrucoes . . . . . . . . . . .  10  HR            Upute za uporabu . . . . . . . .  24
IT  Istruzione per l’uso  . . . . . . . . . . . . .11  TR  Kullan?m k?lavuzu . . . . . . . . . . . . . .  25
NL  Gebruiksaanwijzing  . . . . . . . . . . . .  12  AE   . . . . . . . . . . . . . .  26
SE  Bruksanvisning  . . . . . . . . . . . . . . .  13  RU  Инструкция по эксплуатации . . . .  27
FI  Kayttoohje. . . . . . . . . . . . . . . . . . . .  14  UA  Інструкція з експлуатації. . . . . . . .  28
NO  Bruksanvisning . . . . . . . . . . . . . . . .  15  KZ  ?олданысы бойынша н?с?ама. .  29
DK  Brugervejledning. . . . . . . . . . . . . . .  16  LT  Instrukcija  . . . . . . . . . . . . . . . . . . .  30
HU  Hasznalati utasitas   . . . . . . . . . . . .  17  LV  Instrukcija  . . . . . . . . . . . . . . . . . . .  31
RO  Manual de utilizare  . . . . . . . . . . . .  18  EE  Kasutusjuhend  . . . . . . . . . . . . . . .  32
GR  ??????? ??????? . . . . . . . . . . . . . .  19

14.4 V 0-550  10  15             10   3-5 h
20  25 mm           1.4 kg
-1
1.2 A*h min  mm  Nm              mm
3

English                       -  if liquid comes into contact with the skin, wash quickly with
soap and water, then with lemon juice or vinegar
-  if liquid gets into the eyes, ? ush eyes with clean water for
Cordless drill/driver                 a minimum of 10 minutes and seek immediately medical
attention
•  When battery is not in tool or charger, it should be kept
INTENDED USE                         away from metal objects such as nails, screws, keys etc. to
•  This tool is intended for drilling in wood, metal, ceramic   prevent short-circuit
and plastic; tools with electronic speed control and left/  •  Do not use charger when damaged; take it to one of the
right rotation are also suitable for screwdriving and thread   of? cially registered SBM Group Service Stations for a safety
cutting                            check
•  Do not use battery when damaged; it should be replaced
immediately
TECHNICAL SPECIFICATIONS   1        •  Do not disassemble charger or battery
•  Do not attempt to recharge non-rechargeable batteries with
PRODUCT ELEMENTS   2                 the charger
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
1 Switch for on/off and speed control  •  Do not connect the blue (= neutral) or brown (= live) wire in
2 Switch for changing direction of rotation  the cord of the charger to the earth terminal of the plug
3 Keyless chuck                     •  If for any reason the old plug is cut off the cord of the charger,
it must be disposed of safely and not left unattended
4 Ring for torque control
SAFETY                                    To ensure longer service life and proper performance
of the battery, take the following actions when you
WARNING!  Read all instructions. Failure to follow all instruc-  start using new battery:
tions listed below may result in electric shock, ? re and/or seri-
ous injury.                         1. Use the new battery, without recharging it, till its complete
discharge.
•  Ensure the switch is in the off position before inserting   2. Then charge the battery for 3-5 hours.
battery pack. Inserting the battery pack into power tools that   3. Repeat abovementioned actions (1 and 2) 3-5 times to
have the switch on invites accidents.  reach the nominal battery capacity.
•  Recharge only with the charger speci? ed by the manufacturer.
A charger that is suitable for one type of battery pack may   MAINTENANCE
create a risk of ? re when used with another battery pack.
•  Use power tools only with speci? cally designated battery
packs. Use of any other battery packs may create a risk of   Make sure that the machine is not live when
injury and ? re.                        carrying out maintenance work on the motor.
•  Avoid damage that can be caused by screws, nails and
other elements in your workpiece; remove them before you   Regularly clean the machine housing with a soft cloth, prefer-
start working                     ably after each use. Keep the ventilation slots free from dust
•  Always check that the supply voltage is the same as the   and dirt.If the dirt does not come off use a soft cloth moistened
voltage indicated on the nameplate of the charger (chargers   with soapy water. Never use solvents such as petrol, alcohol,
with a rating of 230V or 240V can also be connected to a   ammonia water, etc. These solvents may damage the plastic
220V supply)                      parts.
•  In case of electrical or mechanical malfunction, immediately   The machine requires no additional lubrication.
switch off the tool or unplug charger from power source  Should a fault occur, e.g. after wear of a part, please contact
•  SBM Group can assure ? awless functioning of the tool only   your local SBM Group dealer.
when original accessories are used
•  Use only accessories with an allowable speed matching at
least the highest no-load speed of the tool  ENVIRONMENT
•  This tool should not be used by people under the age of 16   In order to prevent the machine from damage during transport,
years                             it is delivered in a sturdy packaging. Most of the packaging ma-
•  Be careful not to drill or drive into areas where electrical   terials can be recycled. Take these materials to the appropri-
wires may be contacted            ate recycling locations. Take your unwanted machines to your
•  Ensure that switch (2) is in the middle (locking) position   local SBM Group dealer. Here they will be disposed of in an
before making any adjustments or changing accessories as   environmentally safe way.
well as when carrying or storing the tool  NiCd batteries can be recycled. Deliver them to a disposal site for
•  Do not touch the contacts in the charger  chemical waste so that they can be recycled or disposed of in an
•  Do not expose tool/charger/battery to rain  environmentally friendly manner.
•  Never charge battery outdoors
•  Store tool/charger/battery in locations where temperature
will not exceed 40 °C or drop below 0 °C
•  Batteries will explode in ? re, so do not burn battery for any
reason
•  When damaged, and under extreme usage and temperature
conditions, batteries may start to leak
6