Дрель-шуруповерт аккумуляторная DEFORT DCD-14N-1. Инструкция на русском языке

DCD-14N-1
98299885
GB  User’s Manual  . . . . . . . . . . . . . . . . .  6  PL  Instruksja obslugi  . . . . . . . . . . . . . .  20
DE  Bedienungsanleitung  . . . . . . . . . . . .  7  CZ  Navod k pouziti. . . . . . . . . . . . . . . .  21
FR  Mode d’emploi  . . . . . . . . . . . . . . . . .  8  SI  Navodilo za uporabo. . . . . . . . . . . .  22
ES  Instrucciones de servicio  . . . . . . . . .  9  CS  Uputstvo za korisnike . . . . . . . . . .  23
BOS
PT  Manual de instrucoes . . . . . . . . . . .  10  HR            Upute za uporabu . . . . . . . .  24
IT  Istruzione per l’uso  . . . . . . . . . . . . .11  TR  Kullan?m k?lavuzu . . . . . . . . . . . . . .  25
NL  Gebruiksaanwijzing  . . . . . . . . . . . .  12  AE   . . . . . . . . . . . . . .  26
SE  Bruksanvisning  . . . . . . . . . . . . . . .  13  RU  Инструкция по эксплуатации . . . .  27
FI  Kayttoohje. . . . . . . . . . . . . . . . . . . .  14  UA  Інструкція з експлуатації. . . . . . . .  28
NO  Bruksanvisning . . . . . . . . . . . . . . . .  15  KZ  ?олданысы бойынша н?с?ама. .  29
DK  Brugervejledning. . . . . . . . . . . . . . .  16  LT  Instrukcija  . . . . . . . . . . . . . . . . . . .  30
HU  Hasznalati utasitas   . . . . . . . . . . . .  17  LV  Instrukcija  . . . . . . . . . . . . . . . . . . .  31
RO  Manual de utilizare  . . . . . . . . . . . .  18  EE  Kasutusjuhend  . . . . . . . . . . . . . . .  32
GR  ??????? ??????? . . . . . . . . . . . . . .  19

14,4 V 0-550/
15   20  25 mm           1.25 kg
-1
1.2 A*h min

English                       -  if liquid comes into contact with the skin, wash quickly
with soap and water, then with lemon juice or vinegar
-  if liquid gets into the eyes, ? ush eyes with clean water for
a minimum of 10 minutes and seek immediately medical
Cordless drill/driver                  attention
•  When battery is not in tool or charger, it should be kept
INTENDED USE                          away from metal objects such as nails, screws, keys etc. to
prevent short-circuit
•  This tool is intended for drilling in wood, metal, ceramic   •  Do not use charger when damaged; take it to one of the
and plastic; tools with electronic speed control and left/  of? cially registered SBM Group Service Stations for a
right rotation are also suitable for screwdriving and thread   safety check
cutting
•  Do not use battery when damaged; it should be replaced
immediately
TECHNICAL SPECIFICATIONS   1        •  Do not disassemble charger or battery
•  Do not attempt to recharge non-rechargeable batteries with
PRODUCT ELEMENTS   2                  the charger
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
1 Switch for on/off and speed control  •  Do not connect the blue (= neutral) or brown (= live) wire in
the cord of the charger to the earth terminal of the plug
2 Switch for changing direction of rotation  •  If for any reason the old plug is cut off the cord of the charger,
3 Keyless chuck                       it must be disposed of safely and not left unattended
4 Ring for torque control
To ensure longer service life and proper
SAFETY                                    performance of the battery, take the following
WARNING!  Read all instructions. Failure to follow all instruc-  actions when you start using new battery:
tions listed below may result in electric shock, ? re and/or seri-
ous injury.                         1. Use the new battery, without recharging it, till its complete
discharge.
•  Ensure the switch is in the off position before inserting   2. Then charge the battery for 3-5 hours.
battery pack. Inserting the battery pack into power tools   3. Repeat abovementioned actions (1 and 2) 3-5 times to
that have the switch on invites accidents.  reach the nominal battery capacity.
•  Recharge only with the charger speci? ed by the
manufacturer.  A charger that is suitable for one type   MAINTENANCE
of battery pack may create a risk of ? re when used with
another battery pack.
•  Use power tools only with speci? cally designated battery   Make sure that the machine is not live when carry-
packs. Use of any other battery packs may create a risk of   ing out maintenance work on the motor.
injury and ? re.
•  Avoid damage that can be caused by screws, nails and   Regularly clean the machine housing with a soft cloth, prefer-
other elements in your workpiece; remove them before you   ably after each use. Keep the ventilation slots free from dust
start working                     and dirt.If the dirt does not come off use a soft cloth moistened
•  Always check that the supply voltage is the same as the   with soapy water. Never use solvents such as petrol, alcohol,
voltage indicated on the nameplate of the charger (chargers   ammonia water, etc. These solvents may damage the plastic
with a rating of 230V or 240V can also be connected to a   parts.
220V supply)                      The machine requires no additional lubrication.
•  In case of electrical or mechanical malfunction, immediately   Should a fault occur, e.g. after wear of a part, please contact
switch off the tool or unplug charger from power source  your local SBM Group dealer.
•  SBM Group can assure ? awless functioning of the tool only
when original accessories are used
•  Use only accessories with an allowable speed matching at   ENVIRONMENT
least the highest no-load speed of the tool  In order to prevent the machine from damage during trans-
•  This tool should not be used by people under the age of 16   port, it is delivered in a sturdy packaging. Most of the packag-
years                             ing materials can be recycled. Take these materials to the ap-
•  Be careful not to drill or drive into areas where electrical   propriate recycling locations. Take your unwanted machines
wires may be contacted            to your local SBM Group dealer. Here they will be disposed of
•  Ensure that switch (2) is in the middle (locking) position   in an environmentally safe way.
before making any adjustments or changing accessories   NiCd batteries can be recycled. Deliver them to a disposal site for
as well as when carrying or storing the tool  chemical waste so that they can be recycled or disposed of in an
•  Do not touch the contacts in the charger  environmentally friendly manner.
•  Do not expose tool/charger/battery to rain
•  Never charge battery outdoors
•  Store tool/charger/battery in locations where temperature
will not exceed 40° C or drop below 0° C
•  Batteries will explode in ? re, so do not burn battery for any
reason
•  When damaged, and under extreme usage and temperature
conditions, batteries may start to leak
6