На сайте 124169 инструкций общим размером 502.7 Гб , которые состоят из 6277380 страниц
Руководство пользователя DEFORT DCD-12Nx2D. Основные функции, характеристики и условия эксплуатации изложены на 44 страницах документа в pdf формате.
Доступно к просмотру 37 страниц. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
DCD-12Nx2 93727062 GB User’s Manual . . . . . . . . . . . . . . . . . 6 PL Instruksja obslugi . . . . . . . . . . . . . . 20 DE Bedienungsanleitung . . . . . . . . . . . . 7 CZ Navod k pouziti. . . . . . . . . . . . . . . . 21 FR Mode d’emploi . . . . . . . . . . . . . . . . . 8 SI Navodilo za uporabo. . . . . . . . . . . . 22 ES Instrucciones de servicio . . . . . . . . . 9 CS Uputstvo za korisnike . . . . . . . . . . 23 BOS PT Manual de instrucoes . . . . . . . . . . . 10 HR Upute za uporabu . . . . . . . . 24 IT Istruzione per l’uso . . . . . . . . . . . . .11 TR Kullan?m k?lavuzu . . . . . . . . . . . . . . 25 NL Gebruiksaanwijzing . . . . . . . . . . . . 12 AE . . . . . . . . . . . . . . 26 SE Bruksanvisning . . . . . . . . . . . . . . . 13 RU Инструкция по эксплуатации . . . . 27 FI Kayttoohje. . . . . . . . . . . . . . . . . . . . 14 UA Інструкція з експлуатації. . . . . . . . 28 NO Bruksanvisning . . . . . . . . . . . . . . . . 15 KZ ?олданысы бойынша н?с?ама. . 29 DK Brugervejledning. . . . . . . . . . . . . . . 16 LT Instrukcija . . . . . . . . . . . . . . . . . . . 30 HU Hasznalati utasitas . . . . . . . . . . . . 17 LV Instrukcija . . . . . . . . . . . . . . . . . . . 31 RO Manual de utilizare . . . . . . . . . . . . 18 EE Kasutusjuhend . . . . . . . . . . . . . . . 32 GR ??????? ??????? . . . . . . . . . . . . . . 19
12,0 V 0-350/ 18 20 25 mm 1.15 kg 1.2 A*h 0-1300 -1 min 5
English - if liquid comes into contact with the skin, wash quickly with soap and water, then with lemon juice or vinegar - if liquid gets into the eyes, ? ush eyes with clean water for Cordless drill/driver a minimum of 10 minutes and seek immediately medical attention • When battery is not in tool or charger, it should be kept away INTENDED USE from metal objects such as nails, screws, keys etc. to prevent • This tool is intended for drilling in wood, metal, ceramic and short-circuit plastic; tools with electronic speed control and left/right rotation • Do not use charger when damaged; take it to one of the are also suitable for screwdriving and thread cutting of? cially registered SBM Group Service Stations for a safety check TECHNICAL SPECIFICATIONS 1 • Do not use battery when damaged; it should be replaced immediately • Do not disassemble charger or battery PRODUCT ELEMENTS 2 • Do not attempt to recharge non-rechargeable batteries with the charger 1 Switch for on/off and speed control WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY): 2 Switch for changing direction of rotation • Do not connect the blue (= neutral) or brown (= live) wire in the cord of the charger to the earth terminal of the plug 3 Keyless chuck • If for any reason the old plug is cut off the cord of the charger, 4 Ring for torque control it must be disposed of safely and not left unattended 5 Switch for selecting mechanical speed SAFETY To ensure longer service life and proper performance of the battery, take the following actions when you WARNING! Read all instructions. Failure to follow all instructions start using new battery: listed below may result in electric shock, ? re and/or serious in- jury. 1. Use the new battery, without recharging it, till its complete discharge. • Ensure the switch is in the off position before inserting battery 2. Then charge the battery for 3-5 hours. pack. Inserting the battery pack into power tools that have the 3. Repeat abovementioned actions (1 and 2) 3-5 times to reach switch on invites accidents. the nominal battery capacity. • Recharge only with the charger speci? ed by the manufacturer. A charger that is suitable for one type of battery pack may MAINTENANCE create a risk of ? re when used with another battery pack. • Use power tools only with speci? cally designated battery Make sure that the machine is not live when carry- packs. Use of any other battery packs may create a risk of ing out maintenance work on the motor. injury and ? re. • Avoid damage that can be caused by screws, nails and other elements in your workpiece; remove them before you start Regularly clean the machine housing with a soft cloth, preferably working after each use. Keep the ventilation slots free from dust and dirt. • Always check that the supply voltage is the same as the If the dirt does not come off use a soft cloth moistened with soapy voltage indicated on the nameplate of the charger (chargers water. Never use solvents such as petrol, alcohol, ammonia wa- with a rating of 230V or 240V can also be connected to a 220V ter, etc. These solvents may damage the plastic parts. supply) The machine requires no additional lubrication. • In case of electrical or mechanical malfunction, immediately Should a fault occur, e.g. after wear of a part, please contact your switch off the tool or unplug charger from power source local SBM Group dealer. • SBM Group can assure ? awless functioning of the tool only when original accessories are used • Use only accessories with an allowable speed matching at ENVIRONMENT least the highest no-load speed of the tool In order to prevent the machine from damage during transport, • This tool should not be used by people under the age of 16 it is delivered in a sturdy packaging. Most of the packaging ma- years terials can be recycled. Take these materials to the appropriate • Be careful not to drill or drive into areas where electrical wires recycling locations. Take your unwanted machines to your local may be contacted SBM Group dealer. Here they will be disposed of in an environ- • Ensure that switch (2) is in the middle (locking) position before mentally safe way. making any adjustments or changing accessories as well as NiCd batteries can be recycled. Deliver them to a disposal site for when carrying or storing the tool chemical waste so that they can be recycled or disposed of in an • Do not touch the contacts in the charger environmentally friendly manner. • Do not expose tool/charger/battery to rain • Never charge battery outdoors • Store tool/charger/battery in locations where temperature will not exceed 40° C or drop below 0° C • Batteries will explode in ? re, so do not burn battery for any reason • When damaged, and under extreme usage and temperature conditions, batteries may start to leak 6