Телескоп TEC APO180FL. Инструкция на английском языке

OWNER’S MANUAL
2006

IMPORTANT - PLEASE READ THIS MANUAL BEFORE USING YOUR TELESCOPE
SAFETY WARNINGS
Do not look at the sun through the telescope!
Viewing the sun through the telescope without special equipment (Solar Filters) will cause permanent
visual impairment and telescope parts damage.
Do not disassemble!
Disassembly of telescope could result in personal injury and telescope malfunction.
CONTACT INFORMATION
If you have any questions or need assistance - please contact us:
Phone: 303 273 9322 • Fax: 303 273 0204
E-mail: tec@telescopengineering.com • Web site: www.telescopengineering.com
User’s group site: http://groups.yahoo.com/group/tec-scopes
Address: Telescope Engineering Company • 15730 West 6-th Ave. Golden CO, 80401. USA
TEC APO 180 TECHNICAL SPECIFICATIONS
Clear aperture                                  7” / 180 mm
Focal ratio                                     7.0
Focal length                                    1260 mm
Image scale                                     2.7 arc min/mm
Field curvature                                 450mm
Resolution (theoretical)                        0.66 arc sec
Focuser                                         Feather Touch 3545
Eyepiece holder                                 2” Collet type
Focusing range                                  4.5” / 114 mm
One turn focus travel                           Coarse 21.5 mm /  Fine 2.3 mm
Back focus distance                             7” / 180 mm
Focuser load capacity                           10 lb
Tube assembly diameter                          8” / 201 mm
Dew shield dia.                                 9.2” / 234 mm  ?
TA length (shortest)                            45” / 1140 mm
Balance point position                          20” from focuser’s flange
OTA weight                                      36.5 lb / 16.5 kg *
Lens coatings:                                  Broad band 5 layer antireflection coating  (BBAR)
Price (2006)                                    $18,000
Price includes :                                Optical tube assembly, front cover, plug, tube rings and case.
*for tube rings and TEC 12”dovetail plate - add 3.5 lb.
OPTIONAL EQUIPMENT (see www.telescopengineering.com for the current prices)
Tube rings (extra or replacement)               $360
Finderscope bracket with base                   $120
8x50 finder with illuminated reticle (Japan)    $140
AP finder bracket                               $60
TEC 12” dovetail plate                          $90
Eyepiece Turret                                 $500
Mahogany case for I-Turret                      $150
Field Flattener                                 $750
Adapter for large format CCD camera             $50
1

OVERVIEW
This manual has been written to help you enjoy using your TEC APO 180 refractor.
The APO 180 has number of features that in a given combination are rarely found in one scope:
Precision apochromatic objective with modern coating that makes lenses almost invisible.
Retractable Dew Shield. Light weight tube assembly. FeatherTouch 360° rotatable focuser with coarse and
fine focusing. Collet type eyepiece holder.
Line of accessories, including::
Precision tube rings with adjustable latches
Dovetail plate (same width and fit as Losmandy plates)
Finder bracket with new principle of finder adjustment with two thumb screws only.
Field Flattener with adapter for large CCD cameras (STL of SBIG).)
ALL PARTS OF THE TELESCOPE, INCLUDING: OPTICS, COATINGS, ETC. ARE MADE IN THE USA.
GETTING TO KNOW YOUR TELESCOPE
The parts of the telescope and their functions are identified and described below.
1                  2                 3                       4                         5          6          7
1  Front Cover. - black anodized mashined Aluminum with
push-pull spring loaded latches. It protects the optics and holds
the dew shield during transportation.
2  Retractable Sliding Dew Shield. This feature makes the OTA
shorter for handling and transportation. The open end of the
shield is rounded to improve aerodynamics of the front end of
telescope. Rounded edge creates less turbulence compared to
straight cut baffles.
3  Shield flange. It holds the shield with four 4-40 screws.
4  Tube assembly. The tube interior is coated with a special
light absorbent coating and has 4 sharp edged baffles, which
block internal reflections.
To remove cover put thumb
5  OTA Focusing Mounting Flange.                                   and index fingers into the
6  Focuser.   See following Instructions written by Detlef         sliding latches and move
Schmidt (Starlight Instruments Inc.).                              them ito center (to TEC logo).
The focuser’s tube is coated inside with the same special coat-
ing as the tube assembly.
7  Plug. It is a small part that keeps the focuser end closed.
2