Телескоп TEC APO160FL. Инструкция на английском языке

OWNER’S MANUAL
2006

IMPORTANT - PLEASE READ THIS MANUAL BEFORE USING YOUR TELESCOPE
SAFETY WARNINGS
Do not look at the sun through the telescope!
Viewing the sun through the telescope without special equipment (Solar Filters) will cause permanent
visual impairment and telescope parts damage.
Do not disassemble!
Disassembly of telescope could result in personal injury and telescope malfunction.
CONTACT INFORMATION
If you have any questions or need assistance - please contact us:
Phone: 303 273 9322 • Fax: 303 273 0204
E-mail: tec@telescopengineering.com • Web site: www.telescopengineering.com
User’s group site: http://groups.yahoo.com/group/tec-scopes
Address: Telescope Engineering Company • 15730 West 6-th Ave. Golden CO, 80401. USA
TEC APO 160 TECHNICAL SPECIFICATIONS
Mode         l                    160FL                                     160ED
Clear aperture                                         6.3” / 160 mm
Focal ratio                       7.0                                       8.0
Focal length                      1120 mm                                   1280 mm
Image scale                       3.1 arc min/mm                            2.7 arc min/mm
Field curvature                   420mm                                     490mm
Resolution (theoretical)                               0.75 arc sec
Focuser                                                Feather Touch 3545
Eyepiece holder                                        2” Collet type
Focusing range                                         4.5” / 114 mm
One turn focus travel                           Coarse 21.5 mm /  Fine 2.3 mm
Back focus distance                                    7” / 180 mm
Focuser load capacity                                  10 lb
Tube assembly diameter                                 6.42” / 163 mm
Dew shield dia.                                        8” / 202 mm
TA length (shortest)              39.4” / 1000 mm                           45.5” / 1156mm
Balance point position
OTA weight                        24 lb / 11 kg *                           26 lb / 12 kg*
Lens coatings:                           Broad band 5 layer antireflection coating  (BBAR)
Price (2006)                      $12,000                                           $8,000
Price includes :                  Optical tube assembly, front cover, plug, tube rings.
*for tube rings and TEC 12”dovetail plate - add 3 lb.
OPTIONAL EQUIPMENT (see www.telescopengineering.com for the current prices)
Tube rings (extra or replacement)                      $330
Finderscope bracket with base                          $120
8x50 finder with illuminated reticle (Japan)           $140
AP finder bracket                                      $60
TEC 12” dovetail plate                                 $90
Eyepiece Turret                                        $500
Mahogany case for I-Turret                             $150
Field Flattener (special orders only)                  $750
1

OVERVIEW
This manual has been written to help you enjoy using your TEC APO 160 refractor.
The APO 160 has number of features that in a given combination are rarely found in one scope:
Precision apochromatic objective with modern coating that makes lenses almost invisible.
Retractable Dew Shield. Light weight tube assembly. FeatherTouch 360° rotatable focuser with coarse and
fine focusing. Collet type eyepiece holder. Line of accessories, including: Precision tube rings with adjustable
latches, Dovetail plate (same width and fit as Losmandy plates), Finder bracket with new principle of finder
adjustment with two thumb screws only.
ALL PARTS OF THE TELESCOPE, INCLUDING: OPTICS, COATINGS, ETC. ARE MADE IN THE USA.
GETTING TO KNOW YOUR TELESCOPE
1                  2                 3                       4                         5          6          7
The parts of the telescope and their functions are identified and described below.
1  Front Cover. - black anodized mashined Aluminum with
push-pull spring loaded latches. It protects the optics and holds
the dew shield during transportation.
2  Retractable Sliding Dew Shield. This feature makes the OTA
shorter for handling and transportation. The open end of the
shield is rounded to improve aerodynamics of the front end of
telescope. Rounded edge creates less turbulence compared to
straight cut baffles.
3  Shield flange. It holds the shield with four 4-40 screws.
4  Tube assembly. The tube interior is coated with a special
light absorbent coating and has 4 sharp edged baffles, which
block internal reflections.
5  OTA Focusing Mounting Flange.                                   To remove cover put thumb
6  Focuser.   See following Instructions written by Detlef         and index fingers into the
sliding latches and move
Schmidt (Starlight Instruments Inc.).                              them in the shown directions.
The focuser’s tube is coated inside with the same special coat-
ing as the tube assembly.
7  Plug. It is a small part that keeps the focuser end closed.
2