Внешняя купольная сетевая 3 мп Full HD-камера с поддержкой WDR, PoE и ночной съемки D-LINK DCS-6513. Инструкция на русском языке

Quick Installation Guide
Full HD WDR Day & Night Outdoor Dome Network Camera
This document will guide you through the
basic installation process for your new D-Link
Network Camera.
DCS-6513
Quick Installation Guide
Краткое руководство по установке
Guia de Instalacion Rapida
Guia de Instalacao Rapida
??????
Petunjuk Pemasangan Cepat
Documentation also available on
CD and via the D-Link Website

DCS-6513 Quick Install Guide
ENGLISH  This installation guide provides basic instructions for installing the DCS-6513 Network
Camera on your network. For additional information about how to use the camera,
please see the User’s Manual which is available on the CD included in this package or
from the D-Link support website.
Installation Steps
1.  Verify the package contents against the list below.
2.  Hardware Overview
3.  SD Card Installation
4.  Hardware Installation
5.  Configuration with Wizard
6.  Adjusting the lens 3-axis angel
1. Package Contents
? DCS-6513 Network Camera
? Manual and Software on CD-ROM
? Quick Install Guide
? Power Adapter
? Security Wrench
? Extension Adapter
? Cable Cover
? Screws
? Rubber Plug
? Weather Shield
If any of the above items are missing, please contact your reseller.
Safety Notice:
Installation and servicing should be done by certified technicians so as to conform to all
local codes and prevent voiding your warranty.
2                                        D-Link DCS-6513 Quick Install Guide

2. Hardware Overview
Ethernet Jack                   ENGLISH
RJ-45 connector for Ethernet whichcan also be used to
power the camera using Power over Ethernet (PoE)
Reset Button
Resets camera to factory
default settings
Power Connector
Connects to 12 V DC power
Audio Out
Connects to speakers
Audio In
Connects to a microphone
DI/DO Wiring, 12V DC output
I/O connectors for external
devices
24 V Power Connector
Connects to 24 V AC power
BNC
Analog video output
3. SD Card Installation
Disassemble the Camera
Open the camera enclosure by loosen the
4 screws. Lift the dome off the base of the
camera.
Install the SD Card
Push the SD card into the camera with the
gold contacts oriented towards the base of
the camera. To eject the SD card, push the
SD card into the slot.
D-Link DCS-6513 Quick Install Guide                               3