Крепление для видеостен NEC Videowall Mount PDVW MFS 46 55 P. Инструкция на английском языке

I N S T A L L A T I O N                             I N S T R U C T I O N S
Instrucciones de instalacion                         Istruzioni di installazione
Installationsanleitung                               Installatie-instructies
Instrucoes de Instalacao                             Instructions d?installation
MSMVPU
LSMVPU
FUSION MEDIUM AND LARGE PULL-OUT
PORTRAIT FLAT PANEL MOUNTS
MSMVPU/LSMVPU

MSMVPU/LSMVPU                                                                    Installation Instructions
DISCLAIMER
Milestone AV Technologies, and its affiliated corporations and  CAUTION: A CAUTION alerts you to the possibility of
subsidiaries (collectively "Milestone"), intend to make this  damage or destruction of equipment if you do not follow the
manual accurate and complete. However, Milestone makes no  corresponding instructions.
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this  WARNING: Failure to read, thoroughly understand, and
product. The information contained in this document is subject  follow all instructions can result in serious personal injury,
to change without notice or obligation of any kind. Milestone  damage to equipment, or voiding of factory warranty!  It is the
makes no representation of warranty, expressed or implied,  installer’s responsibility to make sure all components are
regarding the information contained herein. Milestone assumes  properly assembled and installed using the instructions
no responsibility for accuracy, completeness or sufficiency of  provided.
the information contained in this document.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
Chief® is a registered trademark of Milestone AV Technologies.  damage to equipment!  It is the installer’s responsibility to
All rights reserved.
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component. The wall to which the mount is being attached
IMPORTANT WARNINGS AND                           may have a maximum drywall thickness of 5/8" (1.6cm).
CAUTIONS!
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment!  It is the
WARNING: A WARNING alerts you to the possibility of   installer’s responsibility to make sure the combined weight of
serious injury or death if you do not follow the instructions.  all components located on the MSMVPU does not exceed
125 lbs (56.7 kg) or 150 lbs (68 kg) for the LSMVPU.
2

Installation Instructions                                                            MSMVPU/LSMVPU
DIMENSIONS
NOTES:                                            MSMVPU
1.  MAXIMUM MOUNTING PATTERN WIDTH IS 16.44"[410mm].
2.  MINIMUM MOUNTING PATTERN WIDTH IS 3.94"[100mm].
3.  MOUNT IS 3.72"[94.5mm] DEEP WHEN FLAT TO WALL.
EXTENSION DISTANCE IS 7.0"[177.8mm] WITH A MAXIMUM EXTENSION FROM WALL OF 10.7"[272mm].
FOR RECESSED APPLICATIONS, MINIMUM VERTICAL LIFT FOR HOOK ENGAGEMENT IS .56"[14.2mm].
522.5
20.57                                                     0               8.6
477.4                                                0            12X  .34
18.79                          94.5
406.4                    3.72                11.5            10.4
35.5            16.00                                         .45             .41
1.40                                                          50
1.97
61.5
2.42
100
3.94
111.5
150  4.39
5.91
161.5
200  6.36
7.87  211.5
250  8.33
193.7                                           9.84  261.5
7.63                       177.8                     10.30
383.4                                            7.00
15.10               44.5                                     620.7   11.81
1.75  343.7              419.9           24.44
13.53                16.53
99.7                        8.3
3.93                        .33
27
12X 1.06
40.1                       25.4          NOTCH CUTOUTS ARE             MEASUREMENTS:  [MILLIMETERS]
1.58                       1.00          VERTICAL C/L OF MOUNT
INCHES
LSMVPU
1.  MAXIMUM MOUNTING PATTERN WIDTH IS 16.43"[410mm].
2.  MINIMUM MOUNTING PATTERN WIDTH IS 3.94"[100mm].
3.  MOUNT IS 3.71"[94.3mm] DEEP WHEN FLAT TO WALL.
EXTENSION DISTANCE IS 7.0"[177.8mm] WITH A MAXIMUM EXTENSION FROM WALL OF 10.7"[272mm].
FOR RECESSED APPLICATIONS, MINIMUM VERTICAL LIFT FOR HOOK ENGAGEMENT IS .56"[14.2mm].
522.5                                  94.3
20.57                                  3.71
74.1                                25.4
2.92                                1.00                                    3.2             9.6
.13             .38
12.5
8.3                                                    .49  TYP
.33
90.1                                                                                      8.6
3.55                                  NOTCH CUTOUT SIGNIFY                                .34 TYP
VERTICAL C/L OF MOUNT
806.4
31.75
383.4  44.5                            152.4
15.10  1.75                             6.00                 825.5
32.50        419.6
16.52
DIAMOND CUTOUT ALIGNS WITH
25.4                                    VERTICAL C/L OF MOUNT
1.00
99.7
3.93
RAILS CAN BE SLID LEFT OR
RIGHT FOR OFFSET                                     40.7
8X 1.60
MINIMUM VERTICAL
SPACING IS 12"[305mm]                                 MEASUREMENTS:  [MILLIMETERS]
INCHES
3