Видеомагнитофон SONY SLV-SE100A2. Инструкция на английском языке

3-868-342-E1 (1)
Video Cassette
Recorder
Operating Instructions
SLV-SE100A1/A2
PAL
SLV-SE200V1/V2
PAL NTSC 4.43
SLV-SE250D/P
PAL NTSC 4.43
SLV-SX250D
PAL NTSC 4.43
SLV-SE300D1/D2
PAL NTSC 4.43
SLV-SE450D/P
PAL NTSC 4.43
SLV-SE480D
PAL NTSC 4.43
© 2000 Sony Corporation

WARNING                             Compatible colour systems
This VCR is designed to record using the PAL (B/
To prevent fire or shock hazard, do not expose the   G) colour system and play back using the PAL (B/
unit to rain or moisture.           G) and NTSC 4.43* colour systems. Recording of
To avoid electrical shock, do not open the cabinet.   video sources based on other colour systems cannot
Refer servicing to qualified personnel only.  be guaranteed.
Mains lead must only be changed at a qualified   SHOWVIEW is a registered trademark of Gemstar
service shop.                       Development Corporation. The SHOWVIEW system
Precautions                         is manufactured under license from Gemstar
Development Corporation.
Safety
• This unit operates on 220 – 240 V AC, 50 Hz.   * SLV-SE100A1/A2 cannot play NTSC-recorded
Check that the unit’s operating voltage is   tapes.
identical with your local power supply.
• If anything falls into the cabinet, unplug the unit
and have it checked by qualified personnel before
operating it any further.
• The unit is not disconnected from the mains as
long as it is connected to the mains, even if the
unit itself has been turned off.
• Unplug the unit from the wall outlet if you do not
intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never
by the cord.
Installing
• Allow adequate air circulation to prevent internal
heat buildup.
• Do not place the unit on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that
may block the ventilation slots.
• Do not install the unit near heat sources such as
radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical
vibration or shock.
• Do not install the unit in an inclined position. It is
designed to be operated in a horizontal position
only.
• Keep the unit and cassettes away from equipment
with strong magnets, such as microwave ovens or
large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to a
warm location, moisture may condense inside the
VCR and cause damage to the video head and
tape. When you first install the unit, or when you
move it from a cold to a warm location, wait for
about three hours before operating the unit.
Caution
Television programmes, films, video tapes and other
materials may be copyrighted. Unauthorized
recording of such material may be contrary to the
provisions of the copyright laws. Also, use of this
recorder with cable television transmission may
require authorization from the cable television
transmitter and/or programme owner.
2 WARNING

Table of contents
Getting Started
4 Step 1 : Unpacking
5 Step 2 : Setting up the remote commander
9 Step 3 : Connecting the VCR                                         Getting Started
13 Step 4 : Tuning your TV to the VCR
16 Step 5 : Setting up the VCR with the Auto Set Up function
19 Step 6 : Setting the clock
24 Selecting a language
26 Presetting channels
30 Changing/disabling programme positions
36 Setting the PAY-TV/Canal Plus decoder
(not available on SLV-SE100A1/A2 and SE200V1/V2)
Basic Operations                64 Synchronized Recording
(SLV-SE300D1/D2 and SE480D
41 Playing a tape
only)
44 Recording TV programmes
67 Checking/changing/cancelling timer
48 Recording TV programmes using the
settings
Dial Timer
69 Searching using the Smart Search
(SLV-SE300D1/D2, SE450D/P, and
function
SE480D only)
72 Adjusting the picture
53 Recording TV programmes using the
74 Changing menu options
ShowView system
(not available on SLV-SE100A1/A2)  76 Editing with another VCR
57 Recording TV programmes using the
timer                               Additional Information
79 Troubleshooting
Additional Operations           83 Specifications
61 Playing/searching at various speeds  84 Index to parts and controls
63 Setting the recording duration time  Back Cover
Index
Table of contents  3