На сайте 124204 инструкции общим размером 502.84 Гб , которые состоят из 6278868 страниц
Фото
Руководство пользователя SONY SLV-GA59ME. Основные функции, характеристики и условия эксплуатации изложены на 2 страницах документа в pdf формате.
Доступно к просмотру 2 страницы. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
Operations 3-090-245-11 (1) GB Step 2 : Setting up the remote Step 4 : Setting up the unit Playing/searching at various speeds Video Cassette Player commander Before using the unit for the first time, set H PLAY M FF A EJECT 3 Press H PLAY. up the unit. m REW Operating Instructions Inserting the batteries Using the remote commander When the tape reaches the end, it will Insert two R6 (size AA) batteries by To operate the unit, point at the remote 1 Connect the mains lead to the mains. 3 Press MENU, then press v/V/b/B to rewind automatically. matching the + and – on the batteries to the sensor on Remote sensor on the unit. Turn on your TV and the unit. highlight LANGUAGE SET and press diagram inside the battery compartment. PAL NTSC OK. Press b/B to highlight the desired Tune the TV to channel 32 (the initial Remote sensor SLV-GA59ME/SG Insert the negative (–) end first, then push in RF channel for this unit). Refer to your language, ENGLISH or ARABIC, then Playback options and down until the positive (+) end clicks TV manual for TV tuning instructions. press OK. into position. z REC To Do this © 2004 Sony Corporation X PAUSE Stop play Press x STOP. 2 If the picture does not appear clearly on x STOP the TV, press MENU, then press v/V/ Pause play Press X PAUSE. b/B to highlight INSTALLATION and Resume play after Press X PAUSE or H press OK. Then press v/V to highlight pause PLAY. Warning VCR OUTPUT CH and press B. Select Fast-forward the Press M FF during stop. the RF channel by pressing the tape To prevent fire or shock hazard, do not • Do not install the unit in an inclined position. It b/B buttons. Then, tune the TV to the Rewind the tape Press m REW during expose the unit to rain or moisture. is designed to be operated in a horizontal new RF channel so that a clear picture stop. position only. appears. DISPLAY To avoid electrical shock, do not open the View the picture During fast-forward, hold • Keep the unit and cassettes away from cabinet. Refer servicing to qualified during fast- M FF down. equipment with strong magnets, such as personnel only. microwave ovens or large loudspeakers. forward or rewind During rewind, hold m X PAUSE REW down. To prevent fire or shock hazard, do not place • Do not place heavy objects on the unit. H PLAY Play at high speed • During playback, objects filled with liquids, such as vases, on • If the unit is brought directly from a cold to a briefly press M FF or the apparatus. warm location, moisture may condense inside m REW. M FF the unit and cause damage to the video head Notes • During playback, hold The mains lead must only be changed at a and tape. When you first install the unit, or • With normal use, the batteries should last about down M FF or m qualified service shop. x STOP when you move it from a cold to a warm three to six months. REW. When you location, wait for about four hours before • If you do not use the remote commander for an release the button, Precautions operating the unit. extended period of time, remove the batteries m REW normal playback resumes. Safety Caution to avoid possible damage from battery leakage. Eject the tape Press A EJECT on the • This unit operates on 110 – 240 V AC, Television programs, films, video tapes, and other • Do not use a new battery together with an old 1 Turn on your TV and set it to the video unit. 50/60 Hz. Check that the unit’s operating materials may be copyrighted. one. voltage is identical with your local power Unauthorized recording of such material may be • Do not use different types of batteries together. channel. Resume normal Press H PLAY. playback supply. contrary to the provisions of the copyright laws. Also, use of this recorder with cable television 2 Insert a tape. • If anything falls into the cabinet, unplug the transmission may require authorization from the unit and have it checked by qualified personnel cable television transmitter and/or program before operating it any further. owner. • The unit is not disconnected from the mains as Compatible colour/TV systems long as it is connected to the mains, even if the unit itself has been turned off. Color system The unit turns on, and starts playing • Unplug the unit from the mains if you do not Recording Playback automatically if you insert a tape with intend to use it for an extended period of time. PAL PAL To disconnect the lead, pull it out by the plug, MESECAM MESECAM its safety tab removed. never by the lead. NTSC 4.43 NTSC 4.43 Installing NTSC 3.58 NTSC 3.58 • Do not install this equipment in a confined To set the colour system Notes Using Playback Dial on the VCR Tip space such as a book or similar unit. Recording of video sources based on other colour Step 3 : Hookups If the playback picture has no colour, or • The sound is muted during playback at various With Playback Dial, you can operate the • Adjust the picture using the TRACKING +/– systems cannot be guaranteed. • Allow adequate air circulation to prevent speeds and pause. buttons on the VCR if: • To play back tapes recorded with the PAL and streaks appear during playback, set following playback options. internal heat buildup. • You can eject a tape even when the power is - Streaks appear while playing in slow motion. MESECAM colour systems, you need a TV or COLOUR SYSTEM in the USER SET • Do not place the unit on surfaces (rugs, Connecting the aerial off. When you press Z EJECT, the unit turns Playback Dial - Bands appear at the top or bottom while colour monitor compatible with these systems. Connect the unit to your TV using the menu to conform to the system that the tape blankets, etc.) or near materials (curtains, on automatically. After ejecting the tape, the pausing. • Tapes recorded with the NTSC colour system audio/video cable as shown below to watch was recored in (see “Changing menu draperies) that may block the ventilation slots. unit turns off again. - The picture shakes while pausing. can be played back on this unit using a TV or a video pictures on your TV. options”). (Normally set the option to • Do not install the unit near heat sources such as • The counter resets to “0:00:00” whenever a To set tracking to the centre position, press colour monitor for the PAL colour system. AUTO.) radiators or air ducts, or in a place subject to This unit tape is inserted. both buttons (+/–) at the same time. direct sunlight, excessive dust, mechanical To view the tape status on the screen • The counter stops counting when it comes to a Notes vibration or shock. portion with no recording. Press DISPLAY. The following information • The sound is muted during these operations. • If a tape has portions recorded in both PAL and AERIAL IN appears on the TV screen. NTSC systems, the time counter reading will To Do this • In the LP mode, noise may appear or there may TV be no colour. not be correct. This is due to the difference Resume play after Press H PLAY. between the counting cycles of the two color pause • If the playback mode mark does not appear on systems. the TV screen, press DISPLAY. Fast-forward the Quickly turn and release • If antenna hookup is used, the following will tape • The picture may show noise when playing at Getting Started AERIAL OUT Playback Dial to the right high speed in reverse. to mains occur while playing a PAL or MESECAM- (M FF) during stop. Audio/video cable (not supplied) recorded tape: • Do not turn Playback Dial forcibly. It may Rewind the tape Quickly turn and release damage Playback Dial. Step : 1 Unpacking Time counter – the picture is black and white. Playback Dial to the left Connect the aerial to your unit and TV as Aerial cable – the sound is distorted (noisy sound). (m REW) during stop. shown on the right to watch TV programmes (supplied) • Streaks or snow cannot be eliminated and video pictures on your TV. completely in the various playback operations. View the picture During fast-forward, turn Check that you have received the following during fast- and hold Playback Dial to In addition, if your TV has audio/video • On screen symbols may shake while playing or forward or rewind the right (M FF). items with the unit: (A/V) input jacks, we recommend you searching at various speeds. During rewind, turn and • Remote commander • 75-Ohm coaxial cable with F-type connect the unit to your TV using an audio/ : Signal flow hold Playback Dial to the connectors video cable (not supplied) to get a better left (m REW). picture and sound. Play at high speed • During playback, quickly turn and Remaining time release Playback Dial to the right (M FF) or To turn the display off, press DISPLAY left (m REW). The • R6 (Size AA) batteries again. tape continues to play at high speed. • During playback, turn and hold Playback Dial to the right (M FF) or left (m REW). When you release Playback Dial, normal playback resumes.
Editing (when recording on Symptom Remedy Adjusting the picture this unit) 4 Press z REC on this unit to set it to Changing menu options A tape cannot be inserted. • Check that a tape is not already in the tape compartment. recording pause. You can make a copy of a tape using this The remote commander does • Make sure you are pointing the remote commander at the unit for recording or playback. The unit not function. remote sensor on the unit. Adjusting the tracking Adjusting the picture cannot record TV programs directly since it 5 To start editing, press the X PAUSE Menu choices • Replace all the batteries in the remote commander with Although the unit automatically adjusts the sharpness (Auto Sharpness does not have a TV tuner. buttons on both units at the same time. 1 Press MENU, then press v/V/b/B to Initial settings are indicated in bold print. new ones if they are weak. highlight USER SET and press OK. tracking when playing a tape, distortion may Control) Others The tracking meter does not • The recording condition of the tape is very poor and USER SET occur if the recording is in poor condition. You can automatically adjust the sharpness appear on the TV screen. tracking cannot be adjusted. In this case, manually adjust the tracking. of the picture. To stop editing Menu option Set this option to The unit needs to be • Clean the cabinet, panel, and controls with a dry soft During playback, press TRACKING +/– to Press the x STOP buttons on both units. OSD • ON to display the menu on cleaned. cloth, or a soft cloth slightly moistened with a mild display the tracking meter. The distortion 1 During playback, press MENU, then the TV screen. detergent solution. Do not use any type of solvent, such as alcohol or benzine. should disappear as you press one of the two press v/V/b/B to highlight USER To check the remaining tape length • OFF to disappear the menu buttons. To resume automatic tracking SET and press OK. z REC Press DISPLAY. The white bar indicates the from the TV screen. adjustments, eject the tape and re-insert it. X PAUSE approximate length of the tape recording. TAPE • E180 to use an E-180 or Auto head cleaner 2 Press v/V to highlight ASC, then press SELECT shorter type tape. The unit incorporates an auto head cleaner which cleans the video heads when a tape is loaded Before you start editing B. 2 Press v/V to select the option. • E240 to use an E-240 type or unloaded. When the heads are not sufficiently clean, even after a tape has been loaded/ • Turn on your TV and set it to the video tape. unloaded several times, use a video head cleaning cassette. channel. 3 Press B to change the setting, then press • E260 to use an E-260 type tape. OK. Symptoms caused by contaminated video heads 1 Press REC SPEED to select the tape • E300 to use an E-300 type tape. • Normal picture • Rough picture • Unclear picture • No picture (or black speed (SP or LP for the PAL color & white screen system, and SP or EP for the NTSC COLOUR • AUTO to select the colour appears) color system). SYSTEM system automatically. Tracking meter Remaining tape length • PAL to use the tape LP provides a recording time twice as recorded in the PAL colour long as SP. EP provides a recording time To turn the display off, press DISPLAY system. 3 Press v/V to set ASC to ON or OFF. three times as long as SP. again. • MESECAM to use the tape • ON: Picture sharpness is However, SP produces better picture recorded in the MESECAM initial automatically adjusted. quality. To save a recording colour system. contamination terminal • OFF: Adjust the picture sharpness To prevent accidental erasure, break off the • B/W to use the tape recorded in black and white. manually. 2 Insert a source tape with its safety tab safety tab as illustrated. To record on a tape To soften the picture, press b. removed into the other (playback) VCR. again, cover the tab hole with adhesive tape. When using the tape recorded NTSC colour signals: Search for the point to start playback To sharpen the picture, press B. Safety tab • NT3.58 to use the tape and set it to playback pause. recorded in the NTSC 3.58 colour system. 3 Insert a tape with its safety tab in place • NT4.43 to use the tape into this (recording) unit. Search for the recorded in the NTSC 4.43 point to start recording and press colour system. X PAUSE. • NTPB to play back an NTSC-recorded tape on Tips PAL TV. • To edit more precisely, press the X PAUSE buttons on the units to release pause. ASC • ON to automatically adjust 4 Press MENU to return to the original the sharpness of the picture. • To cut out unwanted scenes while editing, screen. press X PAUSE on this unit when an unwanted • OFF to manually adjust the scene begins. When that scene ends, press sharpness of the picture. X PAUSE again to resume recording. Additional information TV system Editing with another unit Setting the recording duration time Troubleshooting Specifications If you have any questions or problems not covered below, please consult your nearest Sony Connections necessary to Tip After you have started recording in the To extend the duration service facility. System General record on this unit • Use Sony’s commercially available connecting normal way, you can have the unit stop Press z REC repeatedly to set a new Color system Power requirements cable. If the other VCR has the AUDIO L and recording automatically after a specified Symptom Remedy PAL, MESECAM, NTSC 3.58, NTSC 4.43 110 – 240 V AC, 50/60 Hz G, K, I R jacks, use a Sony connecting cable (3-phono duration. duration time. Tape speed Power consumption 10 W to 2-phono). To view the duration time The ?/1 ON/STANDBY switch • Connect the mains lead to the mains securely. SP: PAL 23.39 mm/s Operating temperature does not function. Notes 1 While recording, press z REC. Press DISPLAY. The following information Power The power is turned on but the unit • Moisture condensation has occurred. Turn the power NTSC 33.35 mm/s 5 °C to 40 °C • Make sure you connect the plugs to jacks of appears on the TV screen. does not operate. off, unplug the mains lead and leave the unit to dry or LP: PAL 11.70 mm/s Storage temperature Recording duration time appears on the NTSC 16.67 mm/s (playback only) –20 °C to 60 °C the same color. over three hours. EP: NTSC 11.12 mm/s Dimensions including projecting parts and controls TV screen. • If you connect this unit to both the LINE IN Maximum playback time Approx. 360 ? 95 ? 245 mm (w/h/d) The playback picture does not • Make sure the TV is set to the video channel. If you are This unit (Recorder) and LINE OUT jacks of the other VCR, select appear on the TV screen. using a monitor, set it to video input. 10 hrs. in LP mode (with E300 tape) Mass the input correctly to prevent a humming noise. 2 Press z REC repeatedly to set the Fast-forward and rewind time Approx. 2.8 kg The picture is not clear. • Adjust the tracking with the TRACKING +/– buttons. Approx. 1 min. (with E180 tape) Supplied accessories • Make sure you set the CONNECT LINE-1 duration time. switch to OTHERS. • The video heads are dirty (see “Symptoms caused by Tuner section Remote commander (1) In SP mode contaminated video heads”). Clean the video heads RF output signal R6 (Size AA) batteries (2) Each press advances the time in using a Sony video head cleaning cassette. If a Sony UHF channels 21 to 69 (G/K/I) 75-ohm coaxial cable with F-type connectors (1) LINE IN cleaning cassette is not available in your area, have the Aerial out increments of 30 minutes. 75-ohm asymmetrical aerial socket Design and specifications are subject to change without Other VCR (Player) heads cleaned at your nearest Sony service facility (a notice. To cancel the duration standard service charge will be required). Do not use a Inputs and outputs 1:00 4:00 commercially available liquid type cleaning cassette, as LINE IN Press z REC repeatedly and the unit returns it may damage the video heads. VIDEO IN, phono jack (1) to the normal recording mode. • The video heads may have to be replaced. Consult your Input signal: 1 Vp-p, 75 ohms, 0:30 4:30 LINE OUT Playback local Sony service facility for more information. unbalanced, sync negative To stop recording AUDIO IN, phono jack (1) Normal recording The picture has no colour. • The COLOUR SYSTEM option in the USER SET Input level: 327 mVrms To stop the unit while recording, press x menu is set to the wrong position. Set the option to Input impedance: more than 47 kilohms STOP. conform to the system that the tape was recorded in. LINE OUT Audio/video cable (not supplied) In LP (EP) mode The picture rolls vertically • Adjust the vertical hold control on the TV or monitor. VIDEO OUT, phono jack (1) Output signal: 1 Vp-p, 75 ohms, Each press advances the time as shown during picture search. unbalanced, sync negative : Signal flow below. The picture has no sound. • The tape is defective. AUDIO OUT, phono jack (1) • If you made A/V connections, check the audio cable Standard output: 327 mVrms 1:00 4:00 connection. Load impedance: 47 kilohms Output impedance: less than 10 kilohms • If you made connections using the aerial cable only, make sure the TV system is set correctly for your area. 0:30 5:00 The recorded picture has no • Set COLOUR SYSTEM in the USER SET menu colour or unusual colour. according to your local colour system. Normal 9:00 Recording is inserted. cover the tab hole. recording The tape starts playing as soon as it • The safety tab has been removed. To record on this tape, The tape counter decreases minute by The tape is ejected when you • Check that the safety tab has not been removed. minute to 0:00, then the unit stops press z REC. recording and turns off automatically. Nothing happens when you • Make sure the tape is not at its end. press z REC. AC68-02101X Sony Corporation Printed in Indonesia