На сайте 124213 инструкций общим размером 502.86 Гб , которые состоят из 6279321 страницы
Фото
Руководство пользователя SONY SLV-GA55SG. Основные функции, характеристики и условия эксплуатации изложены на 4 страницах документа в pdf формате.
Доступно к просмотру 4 страницы. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
3-867-577-13 (1) Step 3 Video Cassette Player Connecting the unit 2 Connect AERIAL OUT of the unit and the aerial input of your TV using the Connect the aerial to your unit and TV as supplied aerial cable. Operating Instructions shown below to watch TV programmes and AERIAL video pictures on your TV. In addition, if OUT your TV has audio/video (A/V) input IN SLV-GA35ME/PS/SG/TH jacks, we recommend you connect the unit PAL NTSC 4.43 to your TV using an audio/video cable to get a better picture and sound. SLV-GA55ME/MES/PS/SG/TH 3 Connect the mains lead to the mains. PAL NTSC Connecting the aerial SLV-GA65MJ Use the supplied plug adaptor, if PAL NTSC necessary, depending on the design of the mains (SLV-GA35ME, GA55ME, GA55MES and GA65MJ). ©1999 by Sony Corporation Aerial cable (supplied) Getting Started Additional connections Step 1 AERIAL OUT To a TV that has audio/video input jacks This additional connection improves picture Unpacking • Plug adaptor (SLV-GA35ME, GA55ME, and sound quality. Connect the TV as GA55MES and GA65MJ) shown below. AERIAL IN If you want to use the Trinitron TV Synchro Check that you have received the following AERIAL IN Play function, this connection is necessary. items with the unit: (If your TV has two or more inputs, connect to mains the audio/video cable to the VIDEO IN 1 • Remote commander jacks.) : Signal flow This unit Checking your model AUDIO VIDEO name LINE IN LINE OUT 1 Disconnect the aerial cable from your TV and connect it to AERIAL IN on the The instructions in this manual are for TV the 10 models: SLV-GA35ME, GA35PS, rear panel of the unit. • R6 (Size AA) batteries IN GA35SG, GA35TH, GA55ME, VIDEO GA55MES, GA55PS, GA55SG, AERIAL AUDIO OUT GA55TH and GA65MJ. Check your model number by looking at the rear IN Audio/video cable (not supplied) panel of your unit. The SLV-GA65MJ is • Aerial cable the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, “SLV-GA35ME only.” Step 4 Tuning your TV to 3 Tune the TV until the video picture the unit below is clearly displayed on the TV screen. Step 2 If you have connected your unit to the TV using the audio/video cable, skip this step. SONY Setting up the Remote sensor ?/1 ON/STANDBY H PLAY VIDEO CASSETTE PLAYER remote commander Inserting the batteries Refer to your TV manual for tuning instructions. Insert two R6 (size AA) batteries by matching the + and – on the batteries to the TV/VIDEO You have now tuned your TV to the diagram inside the battery compartment. unit. From now on, whenever you want a (TV power) 1 Press ?/1 ON/STANDBY to turn on Insert the negative (–) end first, then push ?/1 the unit. to play a tape, set the TV to the video channel. in and down until the positive (+) end (on/standby) ON/STANDBY clicks into position. PROG (CH) +/– To obtain a clear playback picture VOL +/– 2 Turn on your TV and select a If the video picture does not appear clearly programme position for the video in step 3 above, turn the RF CHANNEL picture. screw on the rear panel of the unit with a To Press screwdriver to a position where the TV This channel will now be referred to as Turn the TV to standby ?/1 (on/standby) the video channel. clearly displays the playback picture. or active mode Some TV has the programme position, To select the TV system Turn on the TV power a (TV power) such as 0, that is reserved for a VCR. In For your TV to receive the correct signal Increase (+) or decrease (–) VOL +/– this case, select that programme from your unit, you must set the TV the TV volume position for the video picture. Refer to SYSTEM switch on the rear panel of the Using the remote commander the instruction manual of your TV for Change the TV PROG (CH) +/– unit to either G (for system B/G) or K (for You can use this remote commander to programme position details. system D/K). If this switch is set to the operate the unit and a Sony TV. To operate wrong position, the sound will be distorted. this unit, point at the remote sensor on the Select an input source TV/VIDEO of the TV either from aerial unit. To operate the TV, point at the remote in or from line in RF CHANNEL sensor on the TV. Buttons in the shaded area of the remote commander can be used to operate your Sony TV. If the TV does not Notes have the g symbol near the remote sensor, • With normal use, the batteries should last this remote commander will not operate the about three to six months. TV. • If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage. • Do not use a new battery with an old one. TV SYSTEM • Do not use different types of batteries. G K
Operations Playing/searching To set the colour system Turning on the unit Press TRINITRON TV SYNCHRO PLAY If streaks appear during playback, set and hold the remote commander in place at various speeds COLOR SYSTEM on the unit to conform to and TV to start for about two seconds. the system that the tape was recorded in. The unit and TV turn on, and the TV is set (Normally set the switch to AUTO.) playback (Trinitron to the video channel. If there is a tape in the H PLAY A EJECT unit, playback starts automatically. If your tape was Set COLOR SYSTEM to TV Synchro Play) m 3 REW M # FF NTSC PB recorded in PAL PAL/MESECAM Notes You can only use this function if your TV is • If the Trinitron TV Synchro Play function does NTSC NTSC made by Sony (Trinitron TV). not work properly: MESECAM PAL/MESECAM How to connect to use this function – Wait a few moments, and press the button again. Connect the unit and TV with the audio/ – Replace both of the batteries in the remote x STOP X PAUSE COLOR SYSTEM To play an NTSC-recorded tape video cable. Be sure to connect the audio/ commander with new ones, and press the video cable to the VIDEO IN 1 jacks on the button again. Set NTSC PB on the unit according to the Z EJECT TV if the TV has two inputs or more. The Note that this function may not operate some colour system of your TV. Sony TVs because of the remote commander’s TV must be placed where it will respond to signal limitations. If your TV is Set NTSC PB to the remote commander while you are • Do not press TRINITRON TV SYNCHRO pointing it at the unit. PAL ON PAL TV PLAY while playing back a video tape. If you do so, the TV’s input source will momentarily Operation NTSC 4.43 NTSC 4.43 switch to the TV’s tuner. Make sure that the TV’s power is in standby DISPLAY NTSC 3.58 NTSC 3.58 mode. (SLV-GA55ME/MES/PS/ SG/TH and GA65MJ only) 3/# SEARCH To view the tape status on the screen Adjusting the Adjusting the tracking y SLOW Press DISPLAY. X PAUSE The following information appears on the picture Press V/v TRACKING NORMAL/SLOW/ STILL ADJUST to obtain the best possible M FF TV screen. picture. The distortion should disappear as H PLAY you press one of the two buttons. If you LINE 1 Although the unit automatically adjusts the x STOP STEREO cannot get a clear picture with manual picture when playing a tape, distortions or m REW adjustment, press TRACKING AUTO/ Remaining noise may occur if the tape was recorded in MANU to return to automatic adjustment. tape length poor condition. If so, manually adjust the resolution, colour and tracking. S– E SP 0 : 00 : 22 Time counter About Optimum Picture Tape speed* RESOLUTION CONTROL II Control (OPC) (SLV-GA35ME/PS/ 1 Turn on your TV and set it to the video buttons SG/TH only) channel. * Appears for a few seconds when the DISPLAY button is pressed and when the mode is Optimum Picture Control (OPC) 2 Insert a tape. changed. automatically improves playback quality by adjusting the unit to the condition of the To turn the display off, press DISPLAY video heads and tape. again. STD PICT The OPC function automatically works on all types of tapes, including rental tapes and (SLV-GA35ME/PS/SG/TH) Notes the tapes that were not recorded with OPC. The unit turns on, and starts playing • The sound is muted during playback at various automatically. speeds and pause. About Adaptive Picture (SLV-GA55ME/MES/PS/SG/TH and • You can eject a tape even when the power is AUTO/MANU Control (APC) (SLV-GA55ME/ GA65MJ) off. When you press Z EJECT, the unit turns on V/v NORMAL/ The unit turns on, and starts playing automatically. After ejecting the tape, the unit SLOW/STILL ADJUST MES/PS/SG/TH and SLV-GA65MJ turns off again. automatically if you insert a tape with • When the pause mode lasts for more than M/m/
Editing with Editing (when recording on Synchronised To prepare the Synchronised this unit) recording another unit recording You can make a copy of a tape using this SYNCHRO REC TAPE SPEED unit for recording or playback. The unit (SLV-GA55ME/MES/PS/SG/TH cannot record TV programmes directly since (SLV-GA55ME/MES/PS/SG/TH and GA65MJ only) it does not have a TV tuner. and GA65MJ only) X PAUSE z REC How to connect to record on The Synchronised Recording feature enables you to record from the connected this unit equipment such as a satellite tuner, a cable TV decoder or a TV that has a timer 1 Set the timer on the equipment to the TV function. Once you set the timer on the time of the programme you want to other equipment, the unit will start record, then turn the equipment off. TAPE SPEED recording the programme synchronised with the timer. 2 Insert a tape with its safety tab in place. Before you start editing Make sure the tape is longer than the • Turn on your TV and set it to the video How to connect to use this total recording time. channel. This unit (Recorder) function 3 Set TAPE SPEED to select the tape Connect the other equipment to the LINE speed (SP or LP for the PAL colour 1 Set TAPE SPEED to select the tape IN jack of this unit. system, and SP or EP for the NTSC speed (SP or LP for the PAL colour colour system). LINE IN system, and SP or EP for the NTSC This unit (Recorder) colour system). 4 Hold SYNCHRO REC down for more Other VCR (Player) CONNECT than two seconds. LP provides a recording time twice as LINE-1 long as SP. EP provides a recording time TV The SYNCHRO REC button lights up three times as long as SP. OTHERS and the unit stands by for recording. However, SP produces better picture LINE IN LINE OUT quality. TV, Satellite tuner, etc. The unit automatically turns on and starts 2 Insert a source tape with its safety tab recording when it receives audio/video removed into the other (playback) VCR. signals from the connected equipment. VMC-710HG/720HG audio/video cable Search for the point to start playback (not supplied) and set it to playback pause. LINE OUT To cancel the Synchronised recording : Signal flow 3 Insert a tape with its safety tab in place Press SYNCHRO REC so that the button’s into this (recording) unit. Search for the light turns off. point to start recording and press VMC-710HG/720HG audio/video cable Tip X PAUSE. To stop recording • Use a commercially available connecting cable (not supplied) such as the Sony VMC-710HG/720HG. If the : Signal flow Press x STOP while recording. other VCR has the AUDIO L and R jacks, use a 4 Press z REC on this unit to set it to The unit automatically stops recording connecting cable such as the Sony VMC- recording pause. 910HG (3-phono to 2-phono). Setting the CONNECT LINE-1 switch when the tape reaches the end or when the other equipment stops transmitting the 5 To start editing, press the X PAUSE When you connect the other equipment to audio/video signals. Notes buttons on both units at the same time. the LINE IN jacks, set the CONNECT LINE- • Make sure you connect the plugs to jacks of the 1 switch on the rear of the unit following Notes same colour. the table below to allow better signal • Some TVs or other equipment automatically • If you connected this unit to both the LINE IN To stop editing transmission to your TV. turn off in a certain time if you do not operate and LINE OUT jacks of the other VCR, select it after it turns on with the timer. In this case the input correctly to prevent a humming Press the x STOP buttons on both units. If the unit is Set the CONNECT LINE-1 the Synchronised Recording also stops noise. connected to switch to automatically. • Make sure you set the CONNECT LINE-1 To check the remaining tape length • The Synchronised Recording starts and stops switch to OTHERS. Press DISPLAY. TV TV according to the signals from the connected The white bar indicates the approximate Satellite, cable TV OTHERS equipment. Refer also to the instruction manual of the connected equipment for its length of the tape recording. decoder, etc. timer function. • Some equipment keeps transmitting signals LINE 1 even though the power is off. In this case, the STEREO Synchronised Recording feature does not work because the unit will not be able to know when Remaining tape to start recording. length S– E 0 : 00 : 22 Time counter To turn the display off, press DISPLAY again. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on a tape again, cover the tab hole with adhesive tape. Safety tab Tips • To edit more precisely, press the X PAUSE buttons on the units to release pause. • To cut out unwanted scenes while editing, press X PAUSE on this unit when an unwanted scene begins. When that scene ends, press X PAUSE again to resume recording.