На сайте 124213 инструкций общим размером 502.86 Гб , которые состоят из 6279321 страницы
Фото
Руководство пользователя SONY SLV-GA45AV. Основные функции, характеристики и условия эксплуатации изложены на 4 страницах документа в pdf формате.
Доступно к просмотру 4 страницы. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
3-063-086-11 (1) Step 3 Video Cassette Player Connecting the unit Connecting the aerial e.g. SLV-GA55MKII (For SLV-GA45AV only) Operating Instructions Connect the unit to your TV using the audio/video cable (supplied) as shown below to watch video pictures on your TV. SLV-GA35MKII Aerial cable (supplied) PAL NTSC 4.43 This unit SLV-GA55MKII/GA65MKII/GA45AV AUDIO VIDEO PAL NTSC LINE IN AERIAL OUT LINE OUT SLV-GA59 PAL SECAM NTSC TV AERIAL IN IN VIDEO AERIAL IN © 2000 Sony Corporation AUDIO to mains Audio/video cable (supplied) Getting Started : Signal flow Step 1 (For SLV-GA35MKII, GA55MKII, GA65MKII and GA59) * A plug adaptor is included with some models. Unpacking • Plug adaptor (included in some models) Connect the aerial to your unit and TV as Use the plug adaptor to connect the mains lead to the mains, if necessary. shown on the right to watch TV programmes and video pictures on your TV. Additional connections Check that you have received the following In addition, if your TV has audio/video items with the unit: (A/V) input jacks, we recommend you To a TV that has audio/video input jacks • Remote commander • Audio/video cable (2-phono to 2-phono) connect the unit to your TV using an (For SLV-GA35MKII, GA55MKII, (SLV-GA45AV only) audio/video cable (not supplied) to get a GA65MKII and GA59) better picture and sound. This additional connection improves picture and sound quality. Connect the TV as shown below. Checking your model This unit • R6 (Size AA) batteries AUDIO VIDEO name LINE IN LINE OUT The instructions in this manual are for the 5 models: SLV-GA35MKII, TV GA55MKII, GA65MKII, GA45AV and GA59. Check your model number by IN • Aerial cable (SLV-GA35MKII, GA55MKII, looking at the rear panel of your unit. VIDEO GA65MKII and GA59 only) AUDIO The SLV-GA55MKII is the model used for illustration purposes. Any difference in operation is clearly Audio/video cable (not supplied) indicated in the text, for example, “SLV-GA35MKII only.” If you want to use the Trinitron TV Synchro Play function, this connection is necessary. (If your TV has two or more inputs, connect the audio/video cable to the VIDEO IN 1 jacks.) Step 2 Step 4 Setting up the Remote sensor Tuning your TV to remote commander 3 Tune the TV until the video picture the unit below is clearly displayed on the TV screen. Inserting the batteries (SLV-GA35MKII, GA55MKII, Insert two R6 (size AA) batteries by GA65MKII and GA59 only) matching the + and – on the batteries to the SONY diagram inside the battery compartment. TV/VIDEO VIDEO CASSETTE PLAYER a (TV power) If you have connected your unit to the TV Insert the negative (–) end first, then push ?/1 using the audio/video cable, skip this step. in and down until the positive (+) end (on/standby) clicks into position. PROG (CH) +/– ?/1 ON/STANDBY H PLAY Refer to your TV manual for tuning VOL +/– instructions. You have now tuned your TV to the unit. From now on, whenever you want To Press to play a tape, set the TV to the video channel. Turn the TV to standby ?/1 (on/standby) or active mode 1 Press ?/1 ON/STANDBY to turn on Turn on the TV power a (TV power) the unit. To obtain a clear playback picture Increase (+) or decrease (–) VOL +/– If the video picture does not appear clearly the TV volume Using the remote commander ON/STANDBY in step 3 above, turn the RF CHANNEL Change the TV PROG (CH) +/– screw on the rear panel of the unit with a You can use this remote commander to programme position screwdriver to a position where the TV operate the unit and a Sony TV. To operate Select an input source TV/VIDEO 2 Turn on your TV and select a clearly displays the playback picture. this unit, point at the remote sensor on the of the TV either from aerial programme position for the video unit. To operate the TV, point at the remote in or from line in picture. To select the TV system sensor on the TV. Buttons in the shaded This channel will now be referred to as For your TV to receive the correct signal area of the remote commander can be used the video channel. from your unit, you must set the TV to operate your Sony TV. If the TV does not Notes SYSTEM switch on the rear panel of the have the g symbol near the remote sensor, • With normal use, the batteries should last about Some TV has the programme position, unit to either G (for system B/G) or K (for this remote commander will not operate the three to six months. such as 0, that is reserved for a VCR. In system D/K). If this switch is set to the TV. • If you do not use the remote commander for an this case, select that programme extended period of time, remove the batteries position for the video picture. Refer to wrong position, the sound will be distorted. to avoid possible damage from battery leakage. the instruction manual of your TV for RF CHANNEL • Do not use a new battery with an old one. details. • Do not use different types of batteries. TV SYSTEM G K SLV-GA35MKII (E) 3-063-086-11 (1)
Operations Playing/searching To set the colour system Turning on the unit Press TRINITRON TV SYNCHRO PLAY If streaks appear during playback, set and hold the remote commander in place at various speeds COLOR SYSTEM on the unit to conform to and TV to start for about two seconds. the system that the tape was recorded in. The unit and TV turn on, and the TV is set (Normally set the switch to AUTO.) playback (Trinitron to the video channel. If there is a tape in the H PLAY A EJECT unit, playback starts automatically. If your tape was Set COLOR SYSTEM to TV Synchro Play) m 3 REW # M FF NTSC PB recorded in PAL PAL/MESECAM Notes You can only use this function if your TV is • If the Trinitron TV Synchro Play function does NTSC NTSC made by Sony (Trinitron TV). not work properly: MESECAM PAL/MESECAM Connections necessary to use this – Wait a few moments, and press the button again. SECAM AUTO (SLV-GA59) function x STOP X PAUSE COLOR – Replace both of the batteries in the remote SYSTEM Connect the unit and TV with the audio/ commander with new ones, and press the video cable. Be sure to connect the audio/ button again. To play an NTSC-recorded tape Note that this function may not operate some Z EJECT video cable to the VIDEO IN 1 jacks on the Set NTSC PB on the unit according to the TV if the TV has two inputs or more. The Sony TVs because of the remote commander’s signal limitations. colour system of your TV. TV must be placed where it will respond to the remote commander while you are • Do not press TRINITRON TV SYNCHRO If your TV is Set NTSC PB to PLAY while playing back a video tape. If you pointing it at the unit. do so, the TV’s input source will momentarily PAL or SECAM ON PAL TV switch to the TV’s tuner. Operation DISPLAY NTSC 4.43 NTSC 4.43 Make sure that the TV’s power is in standby NTSC 3.58 NTSC 3.58 mode. (SLV-GA55MKII, GA65MKII, GA45AV and GA59 only) 3/# SEARCH Adjusting the Adjusting the tracking y SLOW Press V/v TRACKING NORMAL/SLOW/ X PAUSE To view the tape status on the screen picture STILL ADJUST to obtain the best possible M FF Press DISPLAY. picture. The distortion should disappear as H PLAY The following information appears on the you press one of the two buttons. If you x STOP TV screen. Although the unit automatically adjusts the cannot get a clear picture with manual picture when playing a tape, distortions or m REW adjustment, press TRACKING AUTO/ LINE 1 noise may occur if the tape was recorded in STEREO poor condition. If so, manually adjust the MANU to return to automatic adjustment. resolution, colour and tracking. Remaining tape length About Optimum Picture RESOLUTION CONTROL S– E Control (OPC) (SLV-GA35MKII 1 Turn on your TV and set it to the video SP 0 : 00 : 22 Time counter buttons channel. only) Tape speed* Optimum Picture Control (OPC) 2 Insert a tape. * Appears for a few seconds when the DISPLAY automatically improves playback quality by button is pressed and when the mode is adjusting the unit to the condition of the changed. video heads and tape. STD PICT The OPC function automatically works on To turn the display off, press DISPLAY all types of tapes, including rental tapes and again. AUTO/MANU the tapes that were not recorded with OPC. (SLV-GA35MKII) The unit turns on, and starts playing automatically. Notes V/v TRACKING About Adaptive Picture (SLV-GA55MKII/GA65MKII/GA45AV • The sound is muted during playback at various NORMAL/SLOW/ Control (APC) (SLV-GA55MKII/ and GA59) speeds and pause. STILL ADJUST The unit turns on, and starts playing • You can eject a tape even when the power is M/m/
Editing with Editing (when recording on Synchronised How to make a Synchronised this unit) recording another unit recording You can make a copy of a tape using this SYNCHRO REC TAPE SPEED unit for recording or playback. The unit (SLV-GA55MKII/GA65MKII/ cannot record TV programmes directly since (SLV-GA55MKII, GA65MKII, GA45AV and GA59 only) it does not have a TV tuner. GA45AV and GA59 only) X PAUSE z REC Connections necessary to The Synchronised Recording feature enables you to record from connected record on this unit equipment such as a satellite tuner, a cable TV decoder or a TV that has a timer 1 Set the timer on the equipment to the e.g. SLV-GA55MKII function. Once you set the timer on the time of the programme you want to other equipment, the unit will start record, then turn the equipment off. TV TAPE SPEED recording the programme synchronised with the timer. 2 Insert a tape with its safety tab in place. Before you start editing Make sure the tape is longer than the • Turn on your TV and set it to the video Connections necessary to use total recording time. channel. this function 3 Set TAPE SPEED to select the tape This unit (Recorder) Connect the other equipment to the LINE speed (SP or LP for the PAL colour 1 Set TAPE SPEED to select the tape IN jack of this unit. system, and SP or EP for the NTSC speed (SP or LP for the PAL colour colour system). system, and SP or EP for the NTSC This unit (Recorder) colour system). CONNECT 4 Hold SYNCHRO REC down for more LINE-1 than two seconds. LINE IN LP provides a recording time twice as TV long as SP. EP provides a recording time OTHERS The SYNCHRO REC button lights up Other VCR (Player) three times as long as SP. and the unit stands by for recording. However, SP produces better picture LINE IN quality. LINE OUT TV, Satellite tuner, etc. The unit automatically turns on and starts 2 Insert a source tape with its safety tab recording when it receives audio/video removed into the other (playback) VCR. signals from the connected equipment. Search for the point to start playback and set it to playback pause. LINE OUT VMC-710HG/720HG audio/video cable To cancel the Synchronised recording (not supplied) 3 Insert a tape with its safety tab in place Press SYNCHRO REC so that the button’s into this (recording) unit. Search for the light turns off. : Signal flow point to start recording and press X PAUSE. VMC-710HG/720HG audio/video cable To stop recording (not supplied) Press x STOP while recording. Tip : Signal flow • Use a commercially available connecting cable 4 Press z REC on this unit to set it to The unit automatically stops recording such as the Sony VMC-710HG/720HG. If the recording pause. when the tape reaches the end or when the other VCR has the AUDIO L and R jacks, use a Setting the CONNECT LINE-1 switch other equipment stops transmitting the connecting cable such as the Sony VMC- 5 To start editing, press the X PAUSE 910HG (3-phono to 2-phono). When you connect the other equipment to audio/video signals. buttons on both units at the same time. the LINE IN jacks, set the CONNECT LINE- Notes 1 switch on the rear of the unit following Notes the table below to allow better signal • Some TVs or other equipment automatically • Make sure you connect the plugs to jacks of the To stop editing turn off in a certain time if you do not operate same colour. transmission to your TV. it after it turns on with the timer. In this case Press the x STOP buttons on both units. the Synchronised Recording also stops • If you connect this unit to both the LINE IN If the unit is Set the CONNECT LINE-1 and LINE OUT jacks of the other VCR, select To check the remaining tape length automatically. the input correctly to prevent a humming connected to switch to • The Synchronised Recording starts and stops noise. Press DISPLAY. TV TV according to the signals from the connected • Make sure you set the CONNECT LINE-1 The white bar indicates the approximate equipment. Refer also to the instruction switch to OTHERS. length of the tape recording. Satellite, cable TV OTHERS manual of the connected equipment for its decoder, etc. timer function. • Some equipment keeps transmitting signals LINE 1 even though the power is off. In this case, the STEREO Synchronised Recording feature does not work because the unit will not be able to know when Remaining tape to start recording. length S– E 0 : 00 : 22 Time counter To turn the display off, press DISPLAY again. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on a tape again, cover the tab hole with adhesive tape. Safety tab Tips • To edit more precisely, press the X PAUSE buttons on the units to release pause. • To cut out unwanted scenes while editing, press X PAUSE on this unit when an unwanted scene begins. When that scene ends, press X PAUSE again to resume recording.