Видеомагнитофон SONY SLV-ED828ME. Инструкция на английском языке

3-073-156-11 (1) GB
Video Cassette
Recorder
Operating Instructions
PAL NTSC
SLV-ED929MI
SLV-ED925PS
SLV-ED828ME/SG
SLV-ED825PS
SLV-ED323ME/SG
SLV-ED225PS
© 2002 Sony Corporation

WARNING                             • If the unit is brought directly from a cold
to a warm location, moisture may
To prevent fire or shock hazard, do not  condense inside the VCR and cause
expose the unit to rain or moisture.
damage to the video head and tape. When
To avoid electrical shock, do not open the  you first install the unit, or when you
cabinet. Refer servicing to qualified  move it from a cold to a warm location,
personnel only.                      wait for about four hours before operating
the unit.
The mains lead must only be changed at a
qualified service shop.             Caution
Television programmes, films, video tapes
and other materials may be copyrighted.
Precautions                         Unauthorized recording of such material
Safety                              may be contrary to the provisions of the
• This unit operates on 110 – 240 V AC, 50/  copyright laws. Also, use of this recorder
60 Hz. Check that the unit’s operating  with cable television transmission may
voltage is identical with your local power  require authorization from the cable
supply.                            television transmitter and/or programme
• If anything falls into the cabinet, unplug  owner.
the unit and have it checked by qualified
personnel before operating it any further.  Compatible colour/TV systems
• The unit is not disconnected from the  • This VCR is designed to record and play
mains as long as it is connected to the  back using the PAL (B/G, D/K and I),
mains, even if the unit itself has been  MESECAM (B/G and D/K) and NTSC
turned off.                         (M*) colour systems. Recording of video
• Unplug the unit from the mains if you do  sources based on other colour systems
not intend to use it for an extended period  cannot be guaranteed.
of time. To disconnect the lead, pull it out  * SLV-ED929MI only
by the plug, never by the lead.
For SLV-ED925PS, ED828ME/SG,
• To prevent fire or shock hazard, do not  ED825PS, ED323ME/SG and ED225PS
place objects filled with liquids, such as
vases, on the apparatus.           • NTSC colour signals can only be recorded
through the line input.
Installing
• Allow adequate air circulation to prevent  G-CODE is a registered trade mark of
internal heat buildup.             Gemstar Development Corporation. The
G-CODE system is manufactured under
• Do not place the unit on surfaces (rugs,  license from Gemstar Development
blankets, etc.) or near materials (curtains,  Corporation.
draperies) that may block the ventilation
slots.
• Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
position. It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
2  WARNING

Table of Contents
Additional Operations
Getting Started                                                       Getting Started
48 Playing/searching at various speeds
4 Index to parts and controls      49 Setting the recording duration time
10 Step 1 : Unpacking               50 Checking/changing/cancelling
11 Step 2 : Setting up the remote       timer settings
commander                       52 Recording stereo and bilingual
13 Step 3 : Connecting the VCR          programmes (not available on SLV-
15 Step 4 : Setting up the VCR with     ED323ME/SG and ED225PS)
the Auto Set Up function        55 Searching using the index function
18 Step 5 : Setting the clock       56 Adjusting the picture
20 Step 6 : Selecting the TV        57 Reducing the VCR’s power
system                              consumption
21 Selecting a language             58 Changing menu options
(SLV-ED828ME/SG and
ED323ME/SG only)                Editing
22 Presetting channels
60 Connecting to a VCR or stereo
25 Changing/disabling programme
system
positions
62 Basic editing
Basic Operations
Additional Information
30 Playing a tape
63 Troubleshooting
32 Recording TV programmes
67 Specifications
36 Recording TV programmes using
Back cover
the Easy Timer
Index
42 Recording TV programmes using
®
the G-CODE  system
(SLV-ED929MI only)
45 Recording TV programmes using
the timer
Table of contents  3