Видеомагнитофон SONY SLV-ED66ME. Инструкция на английском языке

3-058-429-12  (1)
Video Cassette
Recorder
Operating Instructions
PAL NTSC
SLV-ED88ME/MJ/SG G
SLV-ED66ME/MJ/SG
© 2000 by Sony Corporation

WARNING                             Caution
Television programmes, films, video tapes and
To prevent fire or shock hazard, do not expose  other materials may be copyrighted.
the unit to rain or moisture.       Unauthorized recording of such material may
To avoid electrical shock, do not open the  be contrary to the provisions of the copyright
cabinet. Refer servicing to qualified personnel  laws. Also, use of this recorder with cable
only.                               television transmission may require
The mains lead must only be changed at a  authorization from the cable television
qualified service shop.             transmitter and/or programme owner.
Precautions                         Compatible colour/TV systems
• This VCR is designed to record and play
Safety                                back using the PAL (B/G, D/K and I),
• This unit operates on 110 – 240 V AC, 50/60  MESECAM (B/G and D/K) and NTSC
Hz. Check that the unit’s operating voltage  colour systems. Recording of video sources
is identical with your local power supply.  based on other colour systems cannot be
• If anything falls into the cabinet, unplug the  guaranteed.
unit and have it checked by qualified  • NTSC colour signals can only be recorded
personnel before operating it any further.  through the line input.
• The unit is not disconnected from the mains
as long as it is connected to the mains, even
if the unit itself has been turned off.
• Unplug the unit from the mains if you do
not intend to use it for an extended period of
time. To disconnect the lead, pull it out by
the plug, never by the lead.
Installing
• Allow adequate air circulation to prevent
internal heat buildup.
• Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.
• Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
position. It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to
a warm location, moisture may condense
inside the VCR and cause damage to the
video head and tape. When you first install
the unit, or when you move it from a cold to
a warm location, wait for about four hours
before operating the unit.
2  Introduction

Table of contents
Getting Started
4   Step 1: Unpacking
5   Step 2: Setting up the remote commander
6   Step 3: Connecting the VCR                                         Getting Started
8   Step 4: Tuning your TV to the VCR
10 Step 5: Selecting a language
11 Step 6: Presetting channels
17 Step 7: Setting the clock
Basic Operations                45 Adjusting the picture
19 Playing a tape                   47 Changing menu options
23 Recording TV programmes
26 Recording TV programmes using        Editing
the Easy Timer function
48 Connecting to a VCR or stereo
32 Setting the timer manually           system
49 Basic editing
Additional Operations           50 Audio dubbing
34 Playing/searching at various
speeds                              Additional Information
35 Setting the recording duration   51 Troubleshooting
time
55 Specifications
36 Synchronised recording (SLV-
ED88ME/MJ/SG only)              56 Index to parts and controls
38 Checking/changing/cancelling     Back cover
timer settings                      Index
40 Recording stereo and bilingual
programmes (SLV-ED88ME/MJ/
SG only)
41 Searching the beginning of an
Easy Timer recorded programme
42 Searching using the index
function
44 Searching using the Time Search
function
Introduction  3