Видеомагнитофон SONY SLV-EZ725AZ. Инструкция на английском языке

3-074-911-11 (1) GB
Video Cassette
Recorder
Operating Instructions
SLV-EZ727AZ
PAL NTSC
SLV-EZ725AZ
PAL NTSC4.43
SLV-EZ424AZ
PAL NTSC4.43
SLV-EZ121AZ
PAL NTSC4.43
© 2002 Sony Corporation

WARNING                             • If the unit is brought directly from a cold
to a warm location, moisture may
To prevent fire or shock hazard, do not  condense inside the VCR and cause
expose the unit to rain or moisture.
damage to the video head and tape. When
To avoid electrical shock, do not open the  you first install the unit, or when you
cabinet. Refer servicing to qualified  move it from a cold to a warm location,
personnel only.                      wait for about four hours before operating
the unit.
The mains lead must only be changed at a
qualified service shop.             Caution
Television programmes, films, video tapes
and other materials may be copyrighted.
Precautions                         Unauthorized recording of such material
Safety                              may be contrary to the provisions of the
• This unit operates on 220 – 240 V AC,  copyright laws. Also, use of this recorder
50 Hz. Check that the unit’s operating  with cable television transmission may
voltage is identical with your local power  require authorization from the cable
supply.                            television transmitter and/or programme
• If anything falls into the cabinet, unplug  owner.
the unit and have it checked by qualified
personnel before operating it any further.  Compatible colour/TV systems
• The unit is not disconnected from the  • Check the colour systems of your VCR
mains as long as it is connected to the  using the table below.
mains, even if the unit itself has been  Model  Colour system
turned off.
number
• Unplug the unit from the mains if you do      Recording  Playback
not intend to use it for an extended period  SLV-EZ727AZ PAL  PAL
of time. To disconnect the lead, pull it out   (B/G and B/B) (B/G and B/B)
by the plug, never by the lead.
NTSC 4.43  NTSC 4.43
• To prevent fire or shock hazard, do not       NTSC 3.58  NTSC 3.58
place objects filled with liquids, such as
vases, on the apparatus.            SLV-EZ725AZ, PAL      PAL
EZ424AZ and  (B/G and B/B) (B/G and B/B)
EZ121AZ               NTSC 4.43
Installing
• Allow adequate air circulation to prevent  Recording of video sources based on other
internal heat buildup.              colour systems cannot be guaranteed.
• Do not place the unit on surfaces (rugs,  For SLV-EZ727AZ
blankets, etc.) or near materials (curtains,  • NTSC colour signals can only be recorded
draperies) that may block the ventilation  through the line inputs.
slots.
• Do not install the unit near heat sources  G-CODE is a registered trade mark of
such as radiators or air ducts, or in a place  Gemstar Development Corporation. The
subject to direct sunlight, excessive dust,  G-CODE system is manufactured under
mechanical vibration or shock.
license from Gemstar Development
• Do not install the unit in an inclined  Corporation.
position. It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
2  WARNING

Table of Contents
Additional Operations
Getting Started                                                       Getting Started
48 Playing/searching at various speeds
4 Index to parts and controls      49 Setting the recording duration time
10 Step 1 : Unpacking               50 Checking/changing/cancelling
11 Step 2 : Setting up the remote       timer settings
commander                       52 Recording stereo and bilingual
14 Step 3 : Connecting the VCR          programmes (SLV-EZ727AZ and
16 Step 4 : Setting up the VCR with     EZ725AZ only)
the Auto Set Up function        55 Searching using the index function
18 Step 5 : Setting the clock       56 Adjusting the picture
20 Step 6 : Selecting the TV        57 Reducing the VCR’s power
system                              consumption
21 Step 7 : Presetting channels     58 Changing menu options
with the EASY G-CODE SET
UP function (SLV-EZ727AZ and    Editing
EZ424AZ only)
60 Connecting to a VCR or stereo
22 Presetting channels
system
25 Changing/disabling programme
62 Basic editing
positions
Additional Information
Basic Operations
63 Troubleshooting
30 Playing a tape
67 Specifications
32 Recording TV programmes
Back cover
36 Recording TV programmes using
Index
the Easy Timer
42 Recording TV programmes using
®
the G-CODE  system
(SLV-EZ727AZ and EZ424AZ
only)
45 Recording TV programmes using
the timer
Table of contents  3