Видеомагнитофон SONY SLV-E480EG. Инструкция на английском языке

Index
A, B                   N                       T, U, V, W, X, Y, Z
Aerial hookup  7       NTSC recorded tape  25  Timer recording 35
AFT (Auto Fine Tuning) 20                         cancelling timer
O                             settings  41
C                      OPC (Optimum Picture       changing timer
Cancelling timer settings  41  Control) 43           settings  41
checking timer
Changing timer settings 41
Checking timer settings 41  P                        settings  41
daily/weekly
Cleaning the video     Picture adjustment  43        recording 33, 37
heads  48            Playback 24
Clock setting  12         at various speeds 38    overlapping timer
recordings 42
Connecting                frame-by-frame 38    Tracking adjustment  43
the VCR and your TV  7  slow motion  38
to a TV with a LINE (TV)  Presetting channels 18
connector 7
Colour system          Q
compatible colour    Quick timer 40
systems  2
Counter  25
R
D                      Recording  27
saving  29
Disabling programme       while watching another
position 20
programme    29
Dubbing. See Editing
Remote commander 5
E, F, G, H, I, J, K    RF channel 8
Editing  46            S
Safety tab 29
L, M
Searching at various
LINE (TV) connection  7   speeds  38
LP mode  26, 28        SP mode 28
Sony Corporation

3-861-455-13(1)
Video Cassette
Recorder
Operating Instructions
PAL NTSC 4.43
SLV-E480EG
SLV-E477EG
SLV-E380EG
©1998 by Sony Corporation

WARNING                             Caution
Television programmes, films, video tapes and
To prevent fire or shock hazard, do not expose  other materials may be copyrighted.
the unit to rain or moisture.       Unauthorized recording of such material may
To avoid electrical shock, do not open the  be contrary to the provisions of the copyright
cabinet. Refer servicing to qualified personnel  laws. Also, use of this recorder with cable
only.                               television transmission may require
The mains lead must be changed only at a  authorization from the cable television
qualified service shop.             transmitter and/or programme owner.
Compatible colour systems
Precautions
• This VCR is designed to record and play
Safety                                back using the PAL and MESECAM colour
• This unit operates on 220 – 240 V AC, 50 Hz.  systems (TV systems B/G and D/K) and
Check that the unit’s operating voltage is  play back using the NTSC 4.43 colour
identical with your local power supply.  system.  Recording of video sources based
• If anything falls into the cabinet, unplug the  on other colour systems cannot be
unit and have it checked by qualified  guaranteed.
personnel before operating it any further.  • Tapes recorded with the NTSC colour
• The unit is not disconnected from the mains  system can be played back on this unit using
as long as it is connected to the mains, even  a TV or a colour monitor for the PAL colour
if the unit itself has been turned off.  system.
• Unplug the unit from the mains if you do
not intend to use it for an extended period of
time. To disconnect the lead, pull it out by
the plug, never by the lead.
Installing
• Allow adequate air circulation to prevent
internal heat buildup.
• Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.
• Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
position. It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to
a warm location, moisture may condense
inside the VCR and cause damage to the
video head and tape. When you first install
the unit, or when you move it from a cold to
a warm location, wait for about one hour
before operating the unit.
2  Introduction