Видеомагнитофон SONY SLV-EZ11AZ. Инструкция на английском языке

3-058-432-11  (1)
Video Cassette
Recorder
Operating Instructions
PAL NTSC 4.43
SLV-EZ44AZ/EZ22AZ
SLV-EZ11AZ
© 2000 by Sony Corporation

WARNING                             Caution
Television programmes, films, video tapes and
To prevent fire or shock hazard, do not expose  other materials may be copyrighted.
the unit to rain or moisture.       Unauthorized recording of such material may
To avoid electrical shock, do not open the  be contrary to the provisions of the copyright
cabinet. Refer servicing to qualified personnel  laws. Also, use of this recorder with cable
only.                               television transmission may require
The mains lead must only be changed at a  authorization from the cable television
qualified service shop.             transmitter and/or programme owner.
Precautions                         Compatible colour systems
• This VCR is designed to record and play
Safety                                back using the PAL (B/G) colour system.
• This unit operates on 220-240 V AC, 50 Hz.  Recording of video sources based on other
Check that the unit’s operating voltage is  colour systems cannot be guaranteed.
identical with your local power supply.  • Tapes recorded with NTSC colour system
• If anything falls into the cabinet, unplug the  can be played back on this VCR using a TV
unit and have it checked by qualified  or a colour monitor for the PAL colour
personnel before operating it any further.  system.
• The unit is not disconnected from the mains
as long as it is connected to the mains, even
if the unit itself has been turned off.
• Unplug the unit from the mains if you do
not intend to use it for an extended period of
time. To disconnect the lead, pull it out by
the plug, never by the lead.
Installing
• Allow adequate air circulation to prevent
internal heat buildup.
• Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.
• Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
position. It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to
a warm location, moisture may condense
inside the VCR and cause damage to the
video head and tape. When you first install
the unit, or when you move it from a cold to
a warm location, wait for about four hours
before operating the unit.
2  Introduction

Table of contents
Getting Started
4   Step 1: Unpacking
5   Step 2: Setting up the remote commander
8   Step 3: Connecting the VCR
10 Step 4: Tuning your TV to the VCR
12 Step 5: Setting the clock                                           Getting Started
14 Step 6: Presetting channels with the EASY G-CODE SET UP function
(SLV-EZ44AZ/EZ22AZ only)
16 Presetting channels
23 Setting up the G-CODE* system manually (SLV-EZ44AZ/EZ22AZ only)
26 Changing/disabling programme positions (SLV-EZ44AZ/EZ22AZ only)
Basic Operations                53 Searching using the index
function
30 Playing a tape
55 Adjusting the picture
34 Recording TV programmes
56 Changing menu options
37 Recording TV programmes using
the Easy Timer function         57 Editing with another VCR
43 Recording TV programmes using
the G-CODE system (SLV-             Additional Information
EZ44AZ/EZ22AZ only)
59 Troubleshooting
46 Setting the timer manually
62 Specifications
63 Index to parts and controls
Additional Operations
Back cover
48 Playing/searching at various         Index
speeds
49 Setting the recording duration
time
50 Checking/changing/cancelling
timer settings
52 Searching the beginning of an
Easy Timer recorded programme
* G-CODE is a registered trademark of Gemstar Development Corporation.  The G-CODE system
is manufactured under license from Gemstar Development Corporation.
Introduction  3