Видеомагнитофон SONY SLV-795HF. Инструкция на английском языке

3-858-119-11(1)
Video Cassette
Recorder
Operating Instructions
Owner’s record
The model and serial numbers are located at the rear of the
unit. Record these numbers in the spaces provided below.
Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. _________________________
Serial No. _________________________
j
G
SLV-795HF
©1996 by Sony Corporation

WARNING                             • Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
To prevent fire or shock hazard, do    draperies) that may block the ventilation slots.
not expose the unit to rain or       • Do not install the unit near heat sources
such as radiators or air ducts, or in a place
moisture.                              subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
CAUTION                    position. It is designed to be operated in a
RISK OF ELECTRIC SHOCK     horizontal position only.
DO NOT OPEN
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
CAUTION :  TO REDUCE THE RISK OF ELECTRIC SHOCK,
• Do not place heavy objects on the unit.
DO NOT REMOVE COVER (OR BACK).  • If the unit is brought directly from a cold to
a warm location, moisture may condense
NO USER-SERVICEABLE PARTS INSIDE.
inside the VCR and cause damage to the
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  video head and tape. When you first install
the unit, or when you move it from a cold to
a warm location, wait for about one hour
This symbol is intended to alert the  before operating the unit.
user to the presence of uninsulated
“dangerous voltage” within the  Information
product’s enclosure that may be of sufficient  For customers in the USA
magnitude to constitute a risk of electric shock  You are cautioned that any changes or
to persons.                          modifications not expressly approved in this
manual could void your authority to operate
This symbol is intended to alert the  this equipment.
user to the presence of important  This equipment has been tested and found to
operating and maintenance    comply with the limits for a Class B digital
(servicing) instructions in the literature  device, pursuant to Part 15 of the FCC Rules.
accompanying the appliance.          These limits are designed to provide
reasonable protection against harmful
CAUTION                              interference in a residential installation. This
To prevent electric shock, do not use this  equipment generates, uses, and can radiate
polarized AC plug with an extension cord,  radio frequency energy and, if not installed
receptacle or other outlet unless the blades can  and used in accordance with the instructions,
may cause harmful interference to radio
be fully inserted to prevent blade exposure.  communications. However, there is no
WARNING                              guarantee that interference will not occur in a
particular installation. If this equipment does
The AC power cord must be changed at
qualified service shop.              cause harmful interference to radio or
television reception, which can be determined
Precautions                          by turning the equipment off and on, the user
is encouraged to try to correct the interference
Safety
• Operate the unit only on 120 V AC, 60 Hz.  by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• If anything falls into the cabinet, unplug the  • Increase the separation between the
unit and have it checked by qualified  equipment and receiver.
personnel before operating it any further.
• This unit is not disconnected from the AC  • Connect the equipment into an outlet on a
power source (mains) as long as it is  circuit different from that to which the
receiver is connected.
connected to the wall outlet, even if the unit  • Consult the dealer or an experienced radio/
itself has been turned off.
• One blade of the plug is wider than the  TV technician for help.
other for the purpose of safety and will fit  Caution
into the power outlet only one way. If you  Television programs, films, video tapes and
are unable to insert the plug fully into the  other materials may be copyrighted.
outlet, contact your Sony dealer.  Unauthorized recording of such material may
• Unplug the unit from the wall outlet if you  be contrary to the provisions of the copyright
laws. Also, use of this recorder with cable
do not intend to use it for an extended
period of time. To disconnect the cord, pull  television transmission may require
it out by the plug, never by the cord.  authorization from the cable television
Installing                           transmission and/or program owner.
• Allow adequate air circulation to prevent
internal heat buildup.
2  Introduction

Table of contents
Getting Started
4  Step 1:  Unpacking
5   Step 2:  Setting up the remote commander
7   Step 3:  Hookups
31 Selecting a language                                                Getting Started
32 Setting the clock
38 Setting up cable box control
43 Presetting channels
47 Setting up VCR Plus+*
Basic Operations                    Editing
52 Playing a tape                   74 Hooking up to a VCR or stereo
54 Recording TV programs                system
57 Locating a channel by station ID  75 Basic editing
58 Recording TV programs using
VCR Plus+                           Additional Information
61 Setting the timer manually
76 General setup information
78 Troubleshooting
Additional Operations           81 Specifications
63 Playing/searching at various     82 Index to parts and controls
speeds                          87 Index
66 Recording TV programs using the  back cover
quick timer                         Quick reference to using the VCR
67 Checking/changing/cancelling
timer settings
69 Recording stereo and bilingual
programs
71 Searching using the index
function
72 Adjusting the picture
73 Changing menu options
* VCR Plus+ and PlusCode are trademarks of Gemstar Development Corporation.  VCR Plus+
system is manufactured under license from Gemstar Development Corporation.
Introduction  3