Проектор NEC NC2000C. Инструкция на английском языке

®
DLP Cinema  Projector
NC2000C
User’s Manual

Important Information
Precautions:                                Machine Noise Information Regulation - 3. GPSGV,
Please read this manual carefully before using your  The highest sound pressure level is less than 70 dB (A) in
NC2000C and keep the manual handy for future reference.  accordance with EN ISO 7779.
Important Safeguards                        Disposing of your used product
These safety instructions are to ensure the long life of your  EU-wide legislation as implemented in each Member
projector and to prevent fire and shock. Please read them  State requires that used electrical and electronic
carefully and heed all warnings.                     products carrying the mark (left) must be disposed
of separately from normal household waste.
This includes projectors and their electrical
WARNING                                         accessories or lamps. When you dispose of
such products, please follow the guidance of
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT
your local authority and/or ask the shop where
EXPOSE THIS UNIT TO RAIN OR MOISTURE.               you purchased the product.
After collecting the used products, they are
reused and recycled in a proper way. This
CAUTION
effort will help us reduce the wastes as well
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO            as the negative impact to the human health
and the environment at the minimum level.
NOT OPEN COVER. NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE        The mark on the electrical and electronic products
PERSONNEL.                                          only applies to the current European Union Member
States.
This symbol warns the user that uninsulated
voltage within the unit may have sufficient   WARNING
magnitude to cause electric shock. Therefore,
it is dangerous to make any kind of contact  Installation and transport
with any part inside of this unit.  Consult your dealer for installing and transporting the projector.
DO NOT install or transport the projector by non-professional
person. Doing so may cause the lamp to break or may cause
This symbol alerts the user that important  personal injury.
literature concerning the operation and  • Power Supply
maintenance of this unit has been included.  - Consult your dealer for installing the power cable to the
Therefore, it should be read carefully in  projector. DO NOT install the power cable by yourself.
order to avoid any problems.           Doing so may cause a fire or electric shock.
- The projector is so designed that it operates with the
CAUTION                                         power supply voltage described below.
• In order to reduce any interference with radio and television  For C1 connection
reception use a signal cable with ferrite core attached. Use of  (When the AC power to the projector power supply and
signal cables without a ferrite core attached may cause  the lamp power supply is provided by a single cable)
interference with radio and television reception.  •AC 200V-240V single phase 50/60Hz
• This equipment has been tested and found to comply with the  For C2 connection
limits for a Class A digital device, pursuant to Part 15 of the  (When the AC power to the projector power supply and
FCC Rules. These limits are designed to provide reasonable  the lamp power supply is provided by separate cables)
protection against harmful interference when the equipment is  •AC 100V-240V single phase 50/60Hz (projector
operated in a commercial environment. This equipment  power supply)
generates, uses, and can radiate radio frequency energy and,  •AC 200V-240V single phase 50/60Hz (lamp power
if not installed and used in accordance with the instruction  supply)
manual, may cause harmful interference to radio  Ensure that your power supply fits this requirement
communications. Operation of this equipment in a residential  before attempting to use your projector.
area is likely to cause harmful interference in which case the  - Handle the power cable carefully. A damaged or frayed
user will be required to correct the interference at his or her  power cable can cause electric shock or fire.
own expense.                                  • Do not bend or tug the power cable excessively.
• Do not place the power cable under the projector, or
WARNING                                          any heavy object.
This is a Class A product. In a domestic environment this  • Do not cover the power cable with other soft materials
product may cause radio interference in which case the user  such as rugs.
may be required to take adequate measures.      • Do not heat the power cable.
•Turn off the projector, shut down AC power by using a circuit
DOC compliance Notice                         breaker and contact qualified service personnel under the
following conditions. For C2 connection, turn off the projec-
This Class A digital apparatus meets all requirements of the  tor, shut down the AC power to the projector and the lamp
Canadian Interference-Causing Equipment Regulations.  using a circuit breaker, and contact your dealer/distributor
for a repair.
2

Important Information
- When the power cable is damaged or frayed.  • Do not hold the lens part and the anamorphic lens part
- If liquid has been spilled into the projector, or if it has  (or wide converter lens part) with your hand. Otherwise
been exposed to rain or water.            the projector may tumble or drop, causing personal injury.
- If the projector does not operate normally when you  • If the projector will not be used for an extended period of
follow the instructions described in this user’s manual.  time, shut down AC power.
- If the projector has been dropped or the cabinet has  For C2 connection, turn off the projector, shut down the
been damaged.                             AC power to the projector and the lamp using a circuit
- If the projector exhibits a distinct change in performance,  breaker.
indicating a need for service.           • Shut down AC power by using a circuit breaker before
• Do not place the projector in the following conditions:  cleaning.
- near water, baths or damp rooms.          For C2 connection, turn off the projector, shut down the
- on an unstable cart, stand, or table.     AC power to the projector and the lamp using a circuit
- in direct sunlight, near heaters or heat radiating appliances.  breaker.
- in a dusty, smoky or steamy environment.  • Do not try to touch the ventilation outlet as it can become
- on a sheet of paper or cloth, rugs or carpets.  heated while the projector is turned on.
• Do not place any liquids on top of your projector.  Doing so can lead to burning your hands due to the emitted
Refer servicing to qualified service personnel if liquid has  heat.
been spilled.                              • When main body is damaged, cooling fluids may come out
• Prevent foreign objects such as paper clips and bits of paper  of internal part. DO NOT touch and drink the cooling fluid.
from falling into your projector. Do not attempt to retrieve  When the cooling fluids are swallowed or contacted with
any objects that might fall into your projector. Do not insert  your eyes, please consult with doctors immediately.
any metal objects such as a wire or screwdriver into your  • When using a LAN cable:
projector. If something should fall into your projector,  For safety, do not connect to the connector for peripheral
disconnect it immediately and have the object removed by  device wiring that might have excessive Voltage.
a qualified service personnel.
For C2 connection, turn off the projector, shut down the AC  Installation
power to the projector and the lamp using a circuit breaker,  • Do not put the projector on its side when the lamp is on.
and contact your dealer/distributor.        Doing so may cause damage to the projector.
• Do not cover the lens with the supplied lens cap or  • Handle your projector carefully. Dropping or jarring your
equivalent while the projector is on. Doing so can lead  projector could damage internal components.
distorting or to melting of the cap and burning your hands  • Controlled ambient light environments will allow for an
due to the heat emitted from the light output.  image of higher contrast and depth to be displayed.
• Screens with a soiled, scratched, or discolored area will
CAUTION                                  not produce a clean image. Care should be used in the
handling of the screen.
• High Pressure Lamp May Explode if Improperly Handled.  •To carry the projector, a minimum of five persons are required.
Only service personnel should open the lamp door.  Remove the lens and the lamp before carrying the projector.
Refer Servicing to Qualified Service Personnel.  Do not apply a strong shock to the projector.
• Do not look into the lens while the projector is on. Serious  •Keep finger prints or dust off the lens surface. Leaving
damage to your eyes could result.           finger prints or dust can cause unwanted shadows on the
• Do not touch the projector during a thunder storm. Doing  screen.
so can cause electrical shock or fire.      Cover the lens with the supplied lens cap if the projector
• Ensure that there is sufficient ventilation and that vents are  is not to be used for an extended period of time.
unobstructed to prevent potentially dangerous concentrations
of ozone and the build-up of heat inside your projector.  Lamp Caution: Please read before operation
Allow at least 8 inches (20 cm) of space between your
projector and a wall. Allow at least 20 inches (50 cm) of  • Due to the lamp being sealed in a pressurized environment,
space between the ventilation outlet of the projector and  there is a small risk of explosion, if not operated correctly.
an object.                                  There is minimal risk involved, if the unit is in proper working
Connect the projector exhaust outlet with the exhaust  order, but if damaged or operated beyond the recommended
equipment having a capacity of 13 m /min or more.  hours, the risk of explosion increases. Please note that there
3
• Do not handle the projector and the power cable with wet  is a warning system built in, that displays following message
hands. Doing so can cause electrical shock or fire.  when you reach a preset operating time “Bulb Over Time”.
• Shut down AC power to the projector and disconnect all  When you see this message please contact your dealer for a
the cables before moving the projector to another place.  replacement.
For C2 connection, turn off the projector, shut down the  If the lamp does explode, smoke will be discharged from
AC power to the projector and the lamp using a circuit  the vents located on the back of the unit. Do not stand in
breaker. Disconnect the cables between devices and the  front of the vents during the operation. This smoke is
lamp before moving the projector.           comprised of glass in particulate form and Xenon gas,
• Consult your dealer for installing the power cable to the  and will not cause harm if kept out of your eyes. If your
projector. DO NOT install the power cable by yourself.  eyes have been exposed to this gas, please flush your
Doing so may cause a fire or electric shock.  eyes out with water immediately and seek immediate
•To carry the projector, a minimum of five persons are required.  medical attention. Do not rub your eyes! This could cause
serious injury.
3