Телевизор LG 29FS4RL. Инструкция на английском языке

Colour Television
OWNER’S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this  infor-
mation to your dealer when you require service.
Model number  :
Serial number  :
P/NO : MFL37773356 (CW62C, 33981403/4/5/6 TX)

Contents
Installation.........................................................2  Sound adjustment...........................................13
Connection of external equipment..................3  Time setting.....................................................14
Location and function of controls...................4  Other functions...............................................15
Basic operation.................................................8  PIP operation (option)....................................16
On screen menus..............................................8  Teletext (option)..............................................17
Setting up TV stations......................................9  Troubleshooting check list............................19
Picture adjustment..........................................12
Installation
Power                                Aerial
This set operates on an AC mains supply, the volt-  Connect the aerial cable to the socket on the back
age is as indicated on the label on the back cover.  cover. For the best reception an outdoor aerial
Never apply DC power to the set. In the event of  should be used.
thunderstorms or powercuts, please pull out the
aerial and mains plugs.              Location
DISCONNECTING DEVICE FROM MAINS
- Mains plug is the disconnecting device. The plug  Position your set so that no bright light or sunlight
must remain readily operable.       falls directly onto the screen. Care should be
taken not to expose the set to any unnecessary
Warning                              vibration, moisture, dust or heat. Also ensure that
the set is placed in a position to allow a free flow
To prevent fire or shock hazard, do not expose the  of air. Do not cover the ventilation openings on the
set to rain or moisture.             back cover.
Do not place anything containing liquid on top of
the set, this may cause a fire or could give an
electric shock.
Service
Never remove the back cover of the set as this
can expose you to very high voltage and other
hazards. If the set does not operate properly,
unplug it and call your dealer.
2

Connection of external equipment
You can connect additional equipment, such as  handset to select AV 1 The VCR playback pic-
VCRs, camcorders etc. to your set.      ture appears on the screen.
What is shown here may be somewhat different
from your set.                          You can also record programmes received by the
TV on video tape.
Aerial socket                        Note : Signal type RGB, i.e. the signals red, green
and blue can only be selected for the Euro scart
socket. These signals are transmitted, for exam-
1.  Connect the RF out socket of the VCR to the
ple, by a pay TV decoder, game machine or photo
aerial socket on the back of the set.  CD unit, etc.
2.  Connect the aerial cable to the RF aerial in
socket of the VCR.
3. Store the VCR channel on a desired pro-  Component in sockets (option)
gramme number using the ‘Manual pro-
gramme tuning’ section.            1.  Connect the COMPONENT video output
4.  Select the programme number where the  sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the
VCR channel is stored.                COMPONENT (480i) to the COMPONENT
5. Press the PLAY button on the VCR.    INPUT sockets (Y PB PR) on the set.
2. Connect the audio cable from the COMPO-
NENT to AUDIO IN sockets of AV IN2.
Audio/Video in/out sockets (option)  3. Press the  TV/AV button to select  COMPO-
NENT.
1.  Connect the audio/video out sockets of the  4. Press the PLAY button on the COMPONENT.
VCR to audio/video in sockets of the set and  The COMPONENT playback picture appears
in sockets of the VCR to RF OUT sockets of  on the screen.
the set.
2.  If the VCR is connected to the AV sockets on
the set, press the TV/AV button to select AV1,
AV2 or AV3.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
You can also record programmes received by
the TV on video tape via audio/video out sock-
ets.
Note :  If you have a mono VCR, connect the
audio cable from the VCR to the AUDIO L/MONO
socket of the set.
Euro scart socket (option)
1.  Connect the Euro scart socket of the VCR to
the Euro scart socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when
connected to Euro scart socket, the set will
switch to AV 1 mode automatically. But if you
want to keep on watching TV mode, press the
D D  / EE  or NUMBER buttons.
Otherwise press the  TV/AV button on the
remote control
3