Телевизор LG 21FC1RB. Инструкция на английском языке

Colour Television
OWNER’S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this  infor-
mation to your dealer when you require service.
Model number  :
Serial number  :
P/NO : MFL39582005 (MC059B, 124D TX)

Contents
Installation.........................................................2  Sound adjustment...........................................13
Connection of external equipment..................3  Time setting.....................................................15
Location and function of controls...................4  Other functions...............................................16
Basic operation.................................................8  Troubleshooting check list............................19
On screen menus..............................................8
Setting up TV stations......................................9
Picture adjustment..........................................12
Installation
Power                                Aerial
This set operates on an  AC mains supply, the  Connect the aerial cable to the socket marked
voltage is as indicated on the label on the back  +75 ? on the back cover. For the best reception
cover. Never apply DC power to the set. In the  an outdoor aerial should be used.
event of thunderstorms or powercuts, please pull
out the aerial and mains plugs.      Location
Warning                              Position your set so that no bright light or sunlight
falls directly onto the screen. Care should be
To prevent fire or shock hazard, do not expose  taken not to expose the set to any unnecessary
the set to rain or moisture.         vibration, moisture, dust or heat. Also ensure that
Do not place anything containing liquid on top of  the set is placed in a position to allow a free flow
the set, this may cause a fire or could give an  of air. Do not cover the ventilation openings on
electric shock.                      the back cover.
Service
Never remove the back cover of the set as this
can expose you to very high voltage and other
hazards. If the set does not operate properly,
unplug it and call your dealer.
2

Connection of external equipment
You can connect additional equipment, such as  Note : Signal type RGB, i.e. the signals red, green
VCRs, camcorders etc. to your set.   and blue can only be selected for the Euro scart
Here shown may be somewhat different from your  socket. These signals are transmitted, for exam-
set.                                 ple, by a pay TV decoder, game machine or photo
CD unit, etc.
Aerial socket
S-video /  Audio in sockets (S-AV)
1.  Connect the RF out socket of the VCR to the  (option)
aerial socket on the back of the set.
2.  Connect the aerial cable to the RF aerial in  When connecting the S-video socket of the VCR
socket of the VCR.                to the S-VIDEO socket of the set, the picture qual-
3. Store the VCR channel on the programme  ity will be further improved.
number 0 using the ‘Manual programme tun-
ing’ section.                     1. Connect the S-video socket of the VCR to the
4.  Select the programme number where the VCR  S-VIDEO socket of the set.
channel is stored.                2. Connect the audio cable from the VCR to the
5. Press the PLAY button on the VCR.
AUDIO sockets of the set.
Audio/Video in/out sockets (option)  3. Select  AV3 by pressing the  TV/AV button
repeatedly.
1.  Connect the audio/video out sockets of the  4. Press the PLAY button on the VCR.
VCR to audio/video in sockets of the set and  The VCR playback picture appears on the
in sockets of the VCR to out sockets of the set.  screen.
2.  If the VCR is connected to the AV sockets on
the set, press the TV/AV button to select AV  Note : If both S-VIDEO and VIDEO sockets have
(or AV1), AV 2.                   been connected to the VCR simultaneously, only
3. Press the PLAY button on the VCR.  the S-VIDEO can be received.
The VCR playback picture appears on the
screen.                           Component in sockets (option)
You can also record programmes received by  1.  Connect the COMPONENT video output sock-
the TV on video tape via audio/video out sock-  ets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the DVD
ets.                                 player to the COMPONENT INPUT sockets (Y
PB PR) on the set.
Note : If you have a mono VCR, connect the audio  2. Connect the audio cable from the DVD player
cable from the VCR to the AUDIO L/MONO sock-  to AUDIO IN sockets of AV (or AV1).
et of the set.                       3. Press the  TV/AV button to select  COMPO-
NENT.
Euro scart socket (option)           4. Press the PLAY button on the DVD player.
The COMPONENT playback picture appears
1.  Connect the Euro scart socket of the VCR to  on the screen.
the Euro scart socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when  Headphone socket (option)
connected to Euro scart socket, the set will
switch to AV (or AV1) mode automatically. But  Only models which have a headphone socket can
if you want to keep on watching  TV mode,  perform this function.
press the DD  / EE  or NUMBER buttons.  Insert the headphone plug to the headphone sock-
et of the set.
Otherwise press the  TV/AV button on the  You can listen to the sound through the head-
remote control handset to select AV (or AV1).  phones. To adjust the headphone volume, press
The VCR playback picture appears on the  the F / G button.
screen.
If you press the MUTE button, the sound from the
You can also record programmes received by  headphone’s is switched off.
the TV on video tape.
3