Универсальный пульт ДУ PHILIPS SRU5060. Инструкция на русском языке

SRU 5060/87
EN  Instructions for use   4
IT  Instruzioni per l'uso 13
Instrucciones
ES                 21
de manejo
PR  Manual de utilizacao 30
GR  Od
 	
  39
Инструкции по
RU                 48
использованию
CZ  Navod k pouziti  57
PL  Instrukcja obslugi  65
Quick, Clean & Easy Setup
www.philips.com/urc

Instructions for use
Contents
1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.  Installing the remote control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
English
Inserting the batteries  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Setting the remote control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
3.  Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
4.  Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
Adjusting device selection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adding a function to the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Assign Volume control to another mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Learn a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Restoring the original remote control settings  . . . . . . . . . . . . . . . . . 10-11
5.  Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.  Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Code list of all brands / equipment  . . . . . . . . . . . . . . . . . . . . . . . . . . 74-98
Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
1. Introduction
Congratulations on your purchase of the Philips SRU 5060 universal remote
control. After installing the remote control you can operate a maximum of
6 different devices with it:TV, DVD player/recorder, video recorder,
amplifier/receiver, CD player and STB (settop box, satellite or cable decoder).
You can find information about how to prepare this remote control for use in
the chapter ‘Installing the remote control’.
2. Installing the remote control
Inserting the batteries
1   Press the cover inwards and slide it in the
direction of the arrow.
2   Place two AAA type batteries into the battery
compartment, as shown.
3   Slide the cover back and click it firmly into
place.
Note: If the device indicators in the selector window (DVD, STB,VCR, CD and AMP)
and the Standby key blink four times after every key press, the remote
control is indicating that its batteries are running low. Replace the old
batteries with two new AAA batteries.
Testing the remote control
The remote control has been programmed to operate most Philips devices.
Because the SRU 5060 may use different signals for each brand and even for
different models of the same brand, it is advisable to test whether your
device responds to the SRU 5060.The example below (TV) instructs you
how to do this.You can repeat the same steps for other devices (DVD, video
recorder, etc.) which you want to operate using the SRU 5060.
Example of TV:
1   Turn your TV on manually or use the original remote control.
Tune to channel 1.
2   Press the SELECT key to select TV.
Press the key until the Standby key lights up.
If the key does not light up, check whether the
batteries are properly inserted
(see ‘Inserting the batteries’).
4

Instructions for use
3  Check whether all the keys are working.
For an overview of the keys and their             English
functions see ‘3. Keys and functions’.
–  If the TV responds as it should to all of the
key commands the SRU 5060 is ready for use.
•  If the device does not respond at all or not to all of the
key commands, follow the instructions under
‘Setting the remote control’, or for online setup go to:
www.philips.com/urc.
Setting the remote control
This is only necessary if your device does not respond to the SRU 5060.
If that is the case, the SRU 5060 does not recognize the brand and/or model
of your device and you need to program the remote control to do so.
The example below (TV) instructs you how to do this.You can repeat the
same steps for other devices (DVD, video recorder, etc.) which you want to
operate using the SRU 5060.
Automatically setting the remote control
The remote control will now automatically search for the right code for your
device.
Example of TV:
1  Make sure the TV is switched on and select a channel using the original
remote control or the keys on the TV (for example channel 1).
•  If the device is a DVD-player/recorder or video recorder, insert a disk or
tape and start playback.
2  Press the SELECT key to select TV.
Press the key until the Standby key lights up.
3  Then keep keys 1 and 3 pressed
simultaneously for three seconds until the
Standby key flashes twice and then remains lit.
4  Press and hold the Standby key
of the SRU 5060.
–  The SRU 5060 now starts emitting all known
‘TV off’ signals, one by one.
Each time a code is sent, the Standby key
lights up.
5  When your TV switches off (stand-by), release
the Standby key of the SRU 5060 immediately.
–  The SRU 5060 has now found a code that works on your TV.
6  Check if you can operate all functions on your TV with the SRU 5060.
5